JOBY JB01950-BWW SeaPal Bluetooth Shutter Grip Instruction Manual

JOBY JB01950-BWW SeaPal Bluetooth Shutter Grip Instruction Manual

Thank you for purchasing this SeaPal Bluetooth® Shutter Grip

Overview

The SeaPal Bluetooth® Shutter Grip adds superior control over your phone so you never miss a shot.

The SeaPal Bluetooth® Shutter Grip is simple to connect to  your phone and has a battery life that will allow years of use before needing to be changed.

Please read the following instructions and care tips before using your SeaPal Bluetooth® Shutter Grip for the first time.

Whats in the box

• JOBY Bluetooth Shutter® Grip
• Instructions
• Mounting Hardware

Table of Contents

• Whats in the box
• Nomenclature
• Initial setup
• Using the JOBY Bluetooth Shutter® Grip underwater
• Safety information
• Maintenance
• Limit of liability
• Warranty
• Servicing

Nomenclature

Activating your Bluetooth Shutter Grip

• Unscrew the Back Knob

• Remove the Yellow Tab that is blocking the battery
  connection

• Screw the Knob Back on hand tight

Connect the Bluetooth Shutter to your Phone

• Settings
• Turn on Bluetooth
• Hold down the red Shutter Button for about 3 seconds
• You will see the green light flash
• onnect to JOBY Shutter Grip
• Hit pair

Connect the Bluetooth Shutter to your JOBY SeaPal Waterproof Case

• Use a flat head screwdriver to screw the Bluetooth Shutter to your JOBY SeaPal Waterproof Case

Safety information

• Do not exceed depths of 10m/33ft.
• Do not leave your gear in temperatures greater than 30° C/86°F

Maintenance

After each use, rinse it thoroughly in fresh water. Dry it before storing. Store in a dry, cool area.

Warranty info, limit of liability  Thank you for purchasing a JOBY

product. JOBY products are warranted to be fit for the purpose for which they have been designed, and to be free from defects in materials and workmanship.

This guarantee does not cover the product against subsequent damage or misuse. As JOBY SeaPal products are often used in extreme and volatile environments, we are unable to cover for loss or damage of equipment. Lossof income, reputation or other financial expenses, such as personal injury are also not covered by this warranty.

The period of validity of the Standard Limited Warranty is defined by the law in force in the country, state or region where the product s sold. Please retain your receipt as proof of purchase.

How to get service?

After sales service:
www.joby.com
Videndum Media Solutions Spa
Via Valsugana 100 – 36022 Cassola (VI) – Italy
© 2023 Videndum Media Solutions Spa
JOBY is a registered trademark of Videndum Media Solutions Spa

Compliance

FCC

FCC ID: 2AWZQ-80425
This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the parts responsible for compliance could void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with  the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE

(EN) Hereby, Videndum Media Solutions Spa declares that the SeaPal Bluetooth Shutter Grip radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: joby.com/certification.

IC

IC ID: 31518-JB01950 IC

(EN) Notice to Canadian users

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with RSS 247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

This Class B digital apparatus complies with Canadian ICES 003.

References

• Tripods for Phone, Camera & Tablet | JOBY
• Tripods for Phone, Camera & Tablet | JOBY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>