TESY CN202ZF Electric Panel Heater Instruction Manual

: June 6, 2024
: TESY

Table of Contents

CN202ZF Electric Panel Heater
IMPORTANT SAFETY MEASURES AND INSTRUCTIONS:
PACKING
CLEANING
STORAGE
Environment protection instructions
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

CN202ZF Electric Panel Heater

Usage and Storage Instructions

Panel Heater

CN202ZF
230V~ 50Hz 800/1200/2000W

This product is only suitable for well insulated spaces or occasional use.

IMPORTANT SAFETY MEASURES AND INSTRUCTIONS:

WARNING!

Please read this manual before operating the appliance and keep it at a safe place for future reference. In case the appliance is obtained by a new owner, it should be transferred together with its manual.
CAUTION: Children under 3 years of age should be kept away from the appliance unless they are under constant supervision.
Children from 3 to 8 years of age are allowed to operate the on/oﬀ button ONLY, provided that the appliance is installed and ready for operation and such children have been supervised and instructed in safe operation of the appliance and they understand all related risks.
Children from 3 to 8 years of age MUST NOT: connect the plug to power sockets, make adjustments, clean it or carry out user maintenance operations.
This appliance can be used by children older than 8 years of age and by people with reduced physical, sensor and mental capabilities, as well as by people with insuﬃcient experience and knowledge provided they are supervised or instructed in safe operation of the appliance and understand the related risks. Children should not be allowed to play with the appliance. Cleaning and user maintenance operations must not be carried out by children without supervision.
CAUTION: Some of the appliance parts may get very hot during operation and thus cause burns to users. In case there are children and vulnerable people in the room, special attention should be paid.
WARNING: In order to avoid overheating, do not cover the appliance!
The appliance should not be positioned close under power sockets!
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁed persons in order to avoid a hazard.
This appliance must be used only for the operations it has been designed and intended for, i.e. heating
of domestic premises. This appliance is not intended for commercial application. Every kind of diﬀerent application is considered improper and consequently dangerous. The manufacturer does not bear responsibility for malfunctions resulting from improper and irrational use. Non-adherence to these safety instructions will render the guarantee terms invalid!
DO NOT leave your place while the appliance is operating: ensure that the power switch knob is switched to OFF position. Always disconnect the power plug from the socket.
Keep inﬂammable objects, such as furniture, pillows, bedding, paper, clothes, curtains etc. at a distance of at least 100 cm away from the panel heater.
Do not operate the appliance in areas of use or storage of combustible substances. Do not operate the appliance in areas of combustible media (for example in close proximity to inﬂammable gases or aerosols) – there is great risk of explosion and ﬁre!
Do not insert and do not allow foreign objects to enter the ventilation openings (inlet and outlet) because this will cause electric shock, ﬁre or will damage the panel heater.
This appliance is not suitable for animal breeding and it is intended for domestic use only!
Keep the air inlet and outlet clear of any objects: unobstructed distance of at least 1 metre in front and 1 metre behind the panel heater should be provided.
The most common cause of overheating is ﬂuﬀ and dust deposits in the appliance. Clean the ventilation openings regularly with a vacuum cleaner. Before that disconnect the power plug from the socket.
Never touch the appliance with damp or wet hands – there is danger for your life!
The power socket must be easily accessible all the time in case the power plug has to be disconnected as fast as possible! Never pull the power cord or the appliance itself in order to disconnect it from the mains.
ATTENTION! Outgoing air gets hot during operation (up to more than 100ºC).
Do not cover the appliance. If the appliance gets covered, there is risk of overheating and ﬁre.
If the appliance is damaged or does not work properly, stop it and do not repair it yourself. For any kind of repairs call for assistance the after-sale service centre. This is the place where you will have your broken part replaced with an original one. Non-adherence to this instruction will compromise the appliance safety.
If you decide to stop using such kind of appliance, it is advisable to render it unusable by cutting its power cord after disconnecting it from the mains. It is advisable all possible dangers related to the appliance to be prevented, especially in relation to children that may play with out-of-use appliances.
Never keep the appliance unnecessarily switched on. Disconnect it from the power socket when you do not intend to use it for a long period of time.
Warning: Do not use this appliance with a programming device, counter or any other device which can automatically switch it on because if the appliance is covered or improperly positioned this may cause ﬁre.
Position the power cord in such a way that it does not obstruct the free movement of people and can not be stepped on! Use only approved extension cords which are suitable for this appliance, i.e. have got a conformity sign!
Never move the appliance by pulling its power cord and do not use the power cord for carrying objects!
Do not bend the power cord and do not stretch it over sharp edges, do not position it over hot plates or open ﬂames!
Never use this appliance in close proximity to wet premises – bathroom, shower cabin or swimming pool!

PACKING

After unpacking the appliance, check if all its elements are included in the packing and that it has not been damaged during transportation! In case damage or incomplete delivery is found, contact your authorized retailer!
Do not throw away the original packing! It could be used for storage and transportation purposes in order to avoid damages during transportation!
Disposal of packing materials should be done in the appropriate way! Children should be prevented from playing with the polyethylene bags!

Thank you for choosing panel heaters – CN202ZF. These are products providing heating in winter in the power range of 800Wor 2000W depending on the consumers’ needs for comfortable room temperature. If operated and taken care of properly, the appliance will provide you with many years of useful operation.

INSTALLATION AND OPERATIONS INSTRUCTIONS

The appliance is intended only for on-ﬂoor operation (horizontal ﬂat surface)!
Before operating the panel heater you should install its feet. The feet should be installed at the base of the panel heater by means of 2 screws. Make sure that the feet are properly aligned at the two sides of the panel heater.

Please assemble the feet and the body in the order given in the picture below:

1. Place the convector on the ﬂat desk or carton.

2. Insert the 2 position fins of the feet into the position holes of the body.

3. Tight the fixed screw to connect body .and feet.

Take out the set of 2 screws and attach the feet by screwing the screws with a proper extra tool (screw-driver), which is not included in appliance set.
Set the panel heater in proper working position before connecting it to the mains.
Select a proper place for the appliance, taking into account the safety precautions.
During initial operation or when the appliance has not been used for a long period of time, subtle odour or smoke may be emitted, it will disappear in a short period of time during appliance operation.
There is power & turbo knob. There are 5 selections.
- The appliance is equipped with thermo-regulator sensitive to ambient temperature. You can turn the thermo-regulator knob until the desired room temperature is achieved (the size of the heated room has to conform to the power of the appliance; in case the desired room temperature can not be achieved, an additional panel heater needs to be operated). You can turn the thermostat knob clockwise to maximum power and when the desired room temperature is achieved you have to turn it counter-clockwise slowly until you hear a “ticking” sound. Then the appliance will maintain the air temperature in the room at the adjusted level by switching on and oﬀ automatically.
The appliance has got an in-built anti-frost function. In case you decide to use the appliance in a room, where minimum temperature is to be maintained (winter gardens, cellars or attics), the appliance has to be adjusted to the desired heating level (level I, level II or both), the thermostat knob has to be turned counter -clockwise until it reaches the smallest indicator circle Ο . In this position the appliance will maintain room temperature in the range of 5±2оС, i.e. it will periodically switch on and oﬀ, maintaining the adjusted level of temperature comfort in the room.
The available power levels are presented indicatively. It is compulsory for the appliance to be secured when positioned in a room without supervision. The appliance electric installation has to be equipped with an automatic safety fuse; with a distance between its contacts in disconnected state of at least 3 mm.

Note: The device shows the temperature around the location of the sensor and is not a means of accurately measuring the ambient temperature.

CLEANING

It is compulsory ﬁrst to switch oﬀ the appliance and disconnect its power cord from the socket. Before starting cleaning the panel heater you should wait until it cools down after disconnecting it from the power socket.
Clean the body of the appliance with a damp cloth, vacuum cleaner or soft brush.
Never immerse the appliance into water – there is danger to your life from electric shock!
Never use petrol, thinner or coarse abrasive products for cleaning because they will damage the surface coating of the appliance.

STORAGE

Before putting away the panel heater let it cool down after disconnecting it from the power socket.
Use the original packing for storing the panel heater if it will not be used for a certain period of time. The product can be protected from excessive dust and dirt when it is kept in its original packing.
Never put a hot appliance into its packing!
The product has to be stored at a dry place away from direct sunlight.
It is explicitly forbidden to store the appliance in wet or damp premises.

PRODUCT PACKING SET INCLUDES:

Panel heater 1 pcs
Feet 2 pcs.
Feet fixing screws 2 pcs.
Manual 1 pc.
Guarantee certificate 1 pc.

TECHNICAL CHARACTERISTICS OF THE APPLIANCE:

Model: CN202ZF
Rated power: 2000W
Rated voltage: 230V~
Rated frequency: 50Hz

Environment protection instructions

Old electric appliances contain valuable materials and therefore should not be disposed of as domestic waste! We ask you for your active cooperation to protect the resources and the environment by submitting your appliance to organized buy-back stations (if there are such).

TABLE 2: INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS
Model identifier(s): 1.CN202ZF 2000W/230V~ 50Hz

Table 1

TESY Ltd – Head office
1166 Sofia, Sofia Park,
Building 16V, Office 2.1. 2nd Floor
PHONE: +359 2 902 6666,
FAX: +359 2 902 6660,
office@tesy.com