Baseus BC02 Smartphone Handheld Folding Gimbal Stabilizer Instructions
- June 6, 2024
- Baseus
Table of Contents
- Baseus BC02 Smartphone Handheld Folding Gimbal Stabilizer
- Product introduction
- Specification parameters
- Packing list
- Product overview
- Download and install APP
- Gimbal charging
- Preparation
- Button and interface functions
- Operation instructions
- Shot modes
- Gimbal stabilizer modes
- Gimbal calibration
- Control phone camera
- Firmware Over The Air
- Safe operation guidelines
- Declaration on Toxic or hazardous substances and elements contained in
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Baseus BC02 Smartphone Handheld Folding Gimbal Stabilizer
Disclaimer and warning
Thank you for purchasing BaseusControl Smartphone Handheld Folding Gimbal
Stabilizer stabilizer. The information contains herein affects your safety and
your legal rights and responsibilities. Read this entire document carefully to
ensure proper configuration before use. Failure to read and follow the
instructions and warnings herein may result in serious injury to you or
bystanders, or damage to your device or property. Shenzhen Times Innovation
Technology Co. Ltd. reserves the right of final explanation for this document
and all relevant documents relating to BaseusControl, and the right to make
changes at any time without notice.
By using this product, you hereby signify that you have read this document
carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with
all terms, precautions, practices, policies and guidelines Shenzhen Times
Innovation Technology Co. Ltd. (BaseusControl Smartphone Handheld Folding
Gimbal Stabilizer) has made and may make available.
Precautions
- Disconnect the product from the charger after charging.
- Charge and discharge once every 3 months to keep the battery active.
- Keep the handling stable when BaseusControl Smartphone Handheld Folding Gimbal Stabilizer stabilizer powers on. Shaking BaseusControl during the startup may cause startup failure.
- Refer to the specification parameters for supported phones and accessories weight, otherwise the balance may not be adjusted and the using effect will be affected.
- Store the gimbal in the correct order.
Product introduction
BaseusControl Smartphone Handheld Folding Gimbal Stabilizer is a three-axis
handheld gimbal stabilizer designed for cell phones, which can make cell phone
photography more stable and smooth. This product’s arms are made of aerospace
grade aluminum materials, plus a high- precision motor offer remarkable anti-
shake effect. It is also a foldable storage gimbal stablizer, lightweight and
portable. Using non-orthogonal structure design, horizontal and vertical
shooting modes can be freely switched, so you can quickly switch to vertical
mode for shorting videos or live streaming. Moreover, follow shooting function
provides users with a good live streaming experience, making live streaming
feasible by one person.
With the BaseusControl APP, you can also experience a variety of photography
functions such as motion lapse, smart follow, object tracking, panoramic
shooting and so on.
Specification parameters
- Name: BaseusControl Smartphone Handheld Folding Gimbal Stabilizer Material: PC+Aluminum alloy
- Model No.: Baseus BC02
- Port: Type-C
- Size: Collapsed: 140×115×64mm, Stretch: 263×129×46mm Weight: about 330g
- Supported size of phones: Weight: 250g
- Thickness: below 9.8mm Width: 58-92mm
- Wireless version: low power consumption wireless 4.0
- Operation frequency: 2.400GHz-2.4835GHz
- Battery: 21700 lithium-ion battery
- Battery capacity: 4500mAh
- Energy: 16.65Wh/3.7V
- Charging environment temperature: 5℃to 35℃ Operation environment temperature: 0℃to 40℃Maximum charging voltage: 5V
- Maximum input current: 1.5A
- Charging time: about 3.5h (Use a 10W charger) Working time: 12h (Test reference value under the leveling condition)
The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances.
Packing list
- Baseus Control Smartphone Handheld Folding Gimbal Stabilizer x1
- Simple all-purpose data cable Type-C 3A 0.5m black x1
- User Manual x1
Product overview
Download and install APP
Download BaseusControl APP
Download the APP in APP Store/Android Store or by scanning the QR code below
to download and install the APP.
BaseusControl APP supports iOS 10.0 or above and Android 6.0 or above.
Gimbal charging
- Connect the USB to Type-C charging cable with the gimbal and USB charger for charging. The charging time is about 3.5 hours (using a 10W charger);
- The lights flash one by one when charging, and turn off when full charged.
Check the battery level through the lights:
- Three lights on: 80%-100%
- Two lights on: 40%-80%
- One light on: 10%-40%
- One light flashes: below 10%, please charge
Preparation
Opening and storage
As shown in the figure, hold the handle in your left hand and rotate the arm
backward 180 degrees with your right hand, and when you hear a “click” sound,
it opens completely.
After use, rotate the arm 180 degrees in the opposite direction, and when you
hear a “click” sound, it folds for storage.*The product
must be off for opening and storage.
Button and interface functions
Operation instructions
Power on
- Rotate to open BaseusControl Folding Gimbal Stabilizer;
- Install your phone on the phone clip;
- Long press the power button for 3 seconds to power on.
Note: Clamp the clip on 5mm above the middle of the phone. (maintain good balance) As shown in the figure, hold the handle in your left In addition, make sure that the phone lens is on the left side of the phone clip
Connect APP
Power on the gimbal – turn on the phone Wireless – open the BaseusControl APP
– search the gimbal Wireless and connect the gimbal.
Operation guide
Full follow mode is power on default mode (green light on). The lens moves
slowly following the movement of the handle to the left and right, up and
down. This mode is for beginners to control the movement of the image by
controlling the rotation of the handle for smooth shoot.
You can also manually push the joystick up and down, left and right to control
the smooth movement of the lens.
Shot modes
For different angles of photography, there are several handheld methods as follows.
Standard Mode
Place BaseusControl Handheld Folding Gimbal Stabilizer on the desktop with the
handle perpendicular to the desktop and power on to use normally.
Underslung Mode
Hold the handle of BaseusControl Handheld Folding Gimbal Stabilizer upside
down to enter underslung mode. This mode is used for low-angle near-ground
following shot.
Automatic Inception Mode
after triple press the power button, the lens will automatically rotate.
Meanwhile, the photographer holds BaseusControl Handheld Folding Gimbal
Stabilizer running forward to shoot. The image will present an inception
effect.
Gimbal stabilizer modes
The modes and light status of gimbal stabilizer and the operation methods are
as follows.
Gimbal calibration
If there is an angle deviation after power on, please place the phone on the gimbal in the correct way, open the Wireless and connect the APP, then press “icon”-other functions-initialize the sensor when the gimbal remains stationary. Click calibration and wait for 15 seconds. The gimbal will automatically calibrate and enter sleep mode during this period. Restart it after 15 seconds.
Control phone camera
Instructions for connecting to phone camera
-
Install your phone on BaseusControl Handheld Folding Gimbal Stabilizer and turn it on;
-
Go to Wireless settings of your phone, search the Wireless name of “BaseusControl Handheld Folding Gimbal Stabilizer” (as shown in figure), and press “Connect”;
Note: From the second use, Wireless will be automatically connected by default after power on. -
The phone camera can be used for photography. The control commands are as follows.
Firmware Over The Air
BaseusControl Handheld Folding Gimbal Stabilizer can be upgraded through
BaseusControl app.
How to upgrade
Before upgrading, please check the battery percentage of BaseusControl
Handheld Folding Gimbal Stabilizer, make sure at least two battery level
indicators are on. After connecting Wireless, press “Firmware Over The Air” in
the settings on the left side of the app to start the upgrade, there is a
progress bar to show the upgrade progress. During the upgrade process, you
cannot exit the app or go to the background operation. After successful
upgrade, BaseusControl Handheld Folding Gimbal Stabilizer will automatically
power off, you need to manually power it on for use. If the upgrade fails,
please restart BaseusControl Handheld Folding Gimbal Stabilizer and app, and
connect Wireless and upgrade again.
Safe operation guidelines
- The product should not in contact with any liquid. Never immerse the product in water or wet it. Do not use the product in the rain or humid environments. Corrosion reactions may occur after water goes into the product, which may cause battery spontaneous combustion and may even cause an explosion;
- If the product is on fire, use a carbon dioxide fire extinguisher, water, water mist, sand, fire blanket and dry powder immediately to put out the fire. Please select the fire extinguishing method in the recommended sequence above according to the actual situation;
- Use the product in the environment between 0℃ and 40℃;
- Do not disassemble the product in any way. If the battery is punctured during disassembly, it will cause the leakage of the electrolyte inside the battery, and even trigger a fire or explosion;
- Do not impact mechanically, grind or throw the product. Do not place heavy objects on the product;
- Do not heat the product. Do not place the product in a microwave oven or pressure cooker;
- Do not place the product near the heat source (stove or heater, etc.) or place it in a car in the hot weather. Do not store the product in an environment over 60℃. The ideal storage environment temperature is 22℃ to 30℃;
- Do not store the battery for a long time after the battery is completely discharged to avoid the battery entering the over-discharge state and causing damage to the battery cell, which will not be able to reuse.
Notice
- BaseusControl Smartphone Handheld Folding Gimbal Stabilizer stabilizer is a high-precision control device. Damage may be caused to BaseusControl if it is dropped or subject to external force, and this may result in malfunction;
- Make sure the rotation of the gimbal axes is not blocked by external force when BaseusControl is turned on;
- BaseusControl is not waterproof. Prevent contacts of any kind of liquid or cleaner with BaseusControl. It is recommended to use dry cloth for cleaning;
- Protect BaseusControl from dust and sand during use.
Declaration on Toxic or hazardous substances and elements contained in
electronic products
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in
all homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one
homogeneous material of this part exceeds the limit stipulated in GB/T 26572
standard.
Warm Tip: The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive
Standard: Q/SSCZ 057-2019
Hotline: +86-4000-712-711 Website:
www.baseus.com
Copyright 2010-2021 Shenzhen Times Innovation Technology Co.,Ltd. All Rights
Reserved