Imou IPC-F22FP Bullet 2E 1080P Outdoor Security WiFi Camera User Guide

Imou IPC-F22FP Bullet 2E 1080P Outdoor Security WiFi Camera

Packing List

Camera Introduction

Operating with Imou Life App

• Step 1:
  • Scan the following QR code or search “lmou Life” in Google Play or App Store to download and install the app.
  • If you have installed the app, update it to the latest version.
• Step 2: Run the lmou Life App, and then create an account for the first use.
• Step 3: Connect the camera to power source with the power adapter.

Installing Camera

Make sure that the mounting surface is strong enough to hold at least three times of the device weight.

• Step1: Drill screw holes on the mounting surface as the positioning map shows, and then put in the wall anchors.
• Step2: Attach the pedestal to the mounting surface with the mounting screws.
• Step3: Power up the camera, and then adjust the lens to the ideal angle.
• Step4: Wait for booting to be finished, and then the camera indicator light flashes green.
• Step 5: Do the following operations to finish adding the camera.
  • If you have more than one camera, do step 5 to add them one by one.
  • If the Wi-Fi network has changed or the indicator status goes wrong, press and hold the RESET button for 10 s to reset the camera, and then do step 5 to add the camera again.

FAQ

• Q: The device cannot work normally or start?
  Check the LED indicator status. If the light is not in green, press and hold the reset button for 10 s to reset the camera.

• Q: How to connect the camera to a new Wi-Fi?

  • If the camera is online, select Device Details > Network Config to change the Wi-Fi connection on the app.
  • If the camera is offline, reset the camera, and then configure the camera again.

• Q: Connection is over time?

  • Check the Wi-Fi configuration of the router: Select the channel to auto, and the mode to 11 bgn mixed.
  • Check if the distance between the camera and the router, the camera, and the smartphone is within 5 m (16.4 ft) during the connection.

• Q: When the Micro SD card is full, how is the recorded video saved?
  When the Micro SD card is full, the system will overwrite the previously recorded videos. Save the important information in time.

• Q: The device is offline?
  Check the indicator status:

  • If the green light is on, check whether the router can connect to the Internet. If the Internet is working, restart the camera.
  • If the red light flashes, reset the camera and then configure the camera again.
  • If the red light is on, it means the camera is faulty.

For more questions, please scan the QR code below or visit: www.imoulife.com/web/support/help

Legal and Regulatory Information

Legal and Regulatory Information

Video surveillance can be regulated by laws that vary from country to country Check the lawsin your local region before using this product for surveillance purposes

Intellectual Property Rights

Dahua Technology retains all intellectual property rights relating to technology embodied,n the product described in this document

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions ven in the user documentation. This equipment contains no user- service le components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals

Trademark Acknowledgments

Imou are registered trademarks or trademark applications of Dahua Technology various jurisdictions All other company names and products are trademarks or registered trademarks of their respective companies \

Regulatory Information

European Directive Compliance
This product complies with the applicable CE marketing directives and standards.

• Low Voltage (LVD) Direcbve 201 4/35/EU
• Electromagnet,c Compat,b,hty (EMC) D,recbve 201 4/30/EU

Privacy Protection Notice

As the device user or data controller, you such as the face, fingerprints, car plate number, mail address, phone number, GPS, and so on. You need to be in compliance with the local pnva7 protection laws and regulations to protect the legal, mate and interests o other people by implementing measures, including but not limited to providing clear and visible identification to inform data subject the existence of area and pending related contact.

Support

Should you require any technical assistance, please contact,lour Dahua d1slnbulor If your questions cannot be answered 1mmed1alely, you「1stnbulorw1II fo叩aro your queries through the af people channels lo ensure a rapid response If you ara connected lo the name , you can

• Download user documentation and software updates
• Search by product, category, or phrase.
• Report pro lens to Dahua support staff by logging in to your private support area.
• Visit Dahua Suppo at www.dahuasecunty.com/support

Contact Information

• ZHEJIANG DAHLIA VISION TECHNOLOGY CO , LTD
• Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R. China
• Postcode: 31 0053
• Tel· +86-571-876888″3
• Fax: +86-571-87688815
• Email: overseas@dahuatech.com
• Website: www.dahuasecurity.com

Important Safeguards and Warnings

This Chapter describes the contents covering people handling of the device, hazard prevention and prevention of property damage Read these contents carefully before using the device, complete with them when using, and keep it well for future reference

Safety Requirement

• Avoid by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device
• Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specification of device-specific working temperature and humidity
• Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions
• Do not install the device in a place near the heat source, such as a radiator, heater, furnace, or another heat-generating device to avoid fire.
• Prevent liquid from flowing into the device to avoid damage to internal components.
• Install the device horizontally or install on a stable place to prevent it from falling.
• Install the devi岱 in a well-ventilated place, and do not block the ventilation of the device

RF exposure warning (Only for the product that has RF communication function)
This equipment must be installed and operated in accordance with provided instructions and the antenna(s/ used for this transmitter must be installed to provide a separation distance o at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

References

• nty.com/
• RITY.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>