IMOU L11 Pro Max Dust Collection Robot Vacuum Cleaner User Guide
- May 15, 2024
- imou
Table of Contents
IMOU L11 Pro Max Dust Collection Robot Vacuum Cleaner
Instructions Before Cleaning
Preparation Before Using
Remove Protective Materials
Place the robot on a flat surface and then remove all protective materials on the robot.
Dust Collection Charging Dock Placement
Place the charging dock on a flat ground against the wall. Keep the area
around the charging dock clear of objects.
If the robot fails to recharge/collect dust, stay away from strong sunlight
and devices that emit infrared light, such as TVs, air conditioners, microwave
ovens and more, and try recharging/collecting dust again after changing rooms.
Charge the Robot
Press and hold for 3s to power on the robot. Press to send the robot back to the Charging Dock to charge. The robot will enter standby mode when the robot is fully charged.
- For the first-time cleaning, please ensure that the robot is fully charged.
- It is recommended that the Robot start cleaning from the charging dock to fast the recharging process.
- The robot automatically returns to the dock to charge when its battery is low. It resumes cleaning from the last cleaning spot after the robot has enough power.
Cleaning System
Start
Press to start Auto-cleaning
Press and hold for 3s to start Spot cleaning.
Pause
During cleaning, press to pause cleaning.
The robot enters sleep after it is paused for 60 minutes. Press to wake up the
robot.
Automatically / Manually Recharge
Auto-recharge: Low battery during cleaning. / Cleaning completed.
During cleaning, press to pause cleaning.
Press again, and the robot returns to the charging dock and recharges.
Power Off
When the robot pauses, press and hold for 3s to power it off. The LED
indicator flashes white fast to off.
During charging, the robot can not be powered off or fall the asleep.
Mopping
Uninstall the Water Tank
Press the release button on the dust box to remove the water tank.
Install the Mop Bracket
Add Water
Purified water is recommended.
Мор
Press to start auto-mopping.
Press for 3s to start Spot mopping.
Connect to the Imou Life App
- Before set up the device, please make sure that the 2.4 GHz band Wi-Fi is enabled on your router.
- Make sure that the router encryption method is WPA2 or WPA2/WPA3.
- Confirm that the Wi-Fi password does not include ” “and space.
Set Up the Device
- Scan the QR code below or search for “Imou Life” in the app store to download and install the app
- Open the Imou Life app, tap + on the right upper corner of the page to add your device.
- Device-adding processes vary between different versions of the app. Please follow the instructions in the app that you are using.
Reset Wi-Fi and Reset the Device
Remove the Robot from the Charging Dock, and press both and for 5s until the
indicator flashes red.
When the device is powered off, press for 3s to power it on.
When you hear the prompt sound, follow the instructions on the app to add the
device.
Features
You can view maps, set no-go areas, configure rooms, adjust suction
power and water volume, firmware updates, and more in the Imou Life app.
Use the app to enjoy all available features.
Find user manuals, QSG, and FAQ
Contact us via WhatsApp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>