Imou AC1200 Dual Band WIFI Router User Guide

Imou AC1200 Dual Band WIFI Router

Package Contents

Connect the Device

• Power off the modem, and remove the backup battery if it uses.
• Make sure that the router is close to a power outlet and near Ethernet cables for wired computers.
• Place the router horizontally and orient the antennas vertically.
• Images may differ from the actual product.

LED and Buttons

LED Patterns

• Flashing green WPS mode
• Solid green Internet-connected
• Solid red No Internet connectivity
• Green & Red Updating firmware
•  Off Device is powered off/LED is turned off

Set Up the Network

Method 1: Via a Web Browser

1. Connect to the network name (SSID) displayed on the device label on the router. For security, change to a unique SSID and assign a password.
2. Launch a web browser. Key in http://imouwifi.net in the address bar.
3. Follow the on-screen instructions to set up the Internet connection.

Reset Button

Press and hold the button for more than Ss to reset the router to its factory mode.

WPS Button

Press the button for 1 s to start the WPS process.

Method 2: Via the lmou Life App

1. Download the lmou Life App.
2. Open the lmou Life App and log in.
   • If you are a new user, please register an account first.
3. Add your devices. Follow the instructions on the app to complete the setup and connect to the internet.

FAQ

Q1: What should I do if I can’t access the router’s management page?

• Reboot your router and try again.
• Check your Wi-Fi connection.
• Use another Web browser such as Google Chrome.
• Restart your device.

Q2: What should I do if I can’t access the Internet?

• Reboot your modem and router, then try again.
• Check the Internet is working. With an Ethernet cable connecting the modem to the computer directly.

Q3: What should I do if I forget my Web management page password?

• Check the Web password on the label at the bottom of the router.
• When the router is power on, use a pin to press and hold the RESET button on the back until the LED blinks. Then the password will restore to the default that marked on the label.

Q4: What can I do if my Wi-Fi devices cannot connect over Wi-Fi to the router?

Please try to check:

• You have enabled the router’s SSID network broadcast and displays in your Wi-Fi client’s scanning list.
• You have entered the correct Wi-Fi password when connecting your devices to the Wi-Fi network. If you fail to address the problem, you can reset the router to factory default settings.

For the user guide, support, and more information, please visit https://www.imoulife.com/support
Email service.global@imoulife.com to give suggestions.
Follow @imouglobal to get more brand information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>