TECNO G01 Wireless Earphones User Manual
- June 6, 2024
- TECNO
Table of Contents
TECNO G01 Wireless Earphones User Manual
WELCOME
Thank you for choosing our products. The G01 wireless earphone has a fashionable design, powerful functions, and high compatibility, to provide you with hands-free convenience when making calls.
PACKAGE CONTENT
- 2* G01 Bluetooth earphones
- 1* G01 charging box
- 1* Charging cable
- 1* User Manual
- 2* Large ear tip
- 2* Medium ear tip (fitted on the earphones)
- 2* Small ear tip
- 2* Extra large ear tip
PRODUCT OVERVIEW
- Charging box
- Earphones
- Charging box indicator light
- Charging port
- Earphone indicator light
- Earphone touch area
- Earphone charging contacts
- Ear tip
Controls and functions
Power on
- Open the charging box, and the earphones are automatically turned on.
Power off
- Put the earphones back into the charging box and close the box, and the earphones are turned off automatically.
Bluetooth pairing (with a mobile phone)
- In case of pairing for the first time, the left and right earphones will automatically pair with each other after being turned on and enter the waiting-for-pairing status.
- If the earphones have been paired with a Bluetooth device, the left and right earphones will automatically pair with each other after being turned on and then pair with that device. When there is no pairing activity for about 10 seconds, the earphones will enter the wait-for-pairing status; if not paired in about 3 minutes, the earphones will be turned off automatically.
Pairing with devices
- After the earphones enter the waiting-for-pairing status, enable Bluetooth on the device and find TECNO-G01 on the list of devices available for pairing, and tap to pair.
Play/pause music
- When playing music, double tap the touch area to pause, and double tap again to play.
Answer phone calls
- When there is an incoming call, double tap the touch area to answer the call.
Disconnection with the mobile phone when placed beyond a certain distance
When the earphones are placed beyond a certain distance from the mobile phone and thus become disconnected, the earphones will enter the waiting-for-pairing status. If there is no device that pairs with the earphones for 5 minutes, the earphones will be turned off automatically.
Earphones charging
- Put the earphones in the charging box, close the charging box, and charging starts automatically.
Charging box charging
- When being charged, the charging box will flash in red. When the charging box is fully charged, the red light will keep on. After the charging cable is unplugged, the red light will go out.
Basic Features of Product
Product Name
| G01
---|---
Earphone battery capacity|
40mAh*2
Charging box battery capacity
|
500mAh
Charging Voltage/Current
| 5V/450mA 5V/40mA
Music Playing Time|
Approx 5H
Calling Time
| Approx 4H
Standby Time|
Approx 70H
Transmission range
| ≥ 10m
Bluetooth|
TECNO-G01
Operating Temperature
| 0℃ ~ 45℃
Storage Temperature|
-20℃ ~ 60℃
Earphone Indicator Light
Earphone Status
|
Indicator light status
---|---
Power On| Red light on for 2 second
Power Off| White light on for 2 seconds
Earphone low battery| When the battery power of the headset is lower than (IOS
displays 10%), the alarm is less than 3 times
Charging box low battery| The red light of 0 ~ 10% of the power flickers
rapidly, which indicates that the power is low and prompts the user to charge.
RGB mode is not entered in low power state.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement
This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CUSTOMER SERVICE
Carlcare provides service
WARRANTY CERTIFICATE
Name:
|
---|---
Address:|
Telephone number:
|
Date of purchase:|
Store name:
|
S/N:|
TECNO MOBILE LIMITED
TM and ©2019 TECNO Corporation. All rights reserved. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. Specifications are subject to change without notice. Model names and the availability of particular products may vary by region.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>