Cloudy Bay DCO1220SMXXX 12 Inch LED Ceiling Light Instruction Manual

Cloudy Bay DCO1220SMXXX 12 Inch LED Ceiling Light

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC approved wire only for input/output connections Remove fixture and mounting components from the box, and make sure that no parts
are missing, by referencing the illustration in the illustration instructions.

Warning
Turn power off before installation, inspection, or removal. Use all necessary precautions while performing this procedure. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supply conductors. Properly ground electrical enclosure. IT IS IMPERATIVE THAT THE OUTLET BOX BE PROPERLY GROUNDED. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE COMPROMISED. This Integrated LED Fixture has no lamp/bulb to replace.

Year Limited Warranty

LIMITED WARRANTY: This fixture is warranted to be free from defects in workmanship and material for up to 3-years. Based upon reasonable household usage, when used in accordance with package and included instructions. If this fixture does not last for the time period guaranteed, manufacture will send you a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at sm11rt@cloudybayflghtlng.com to find out how to return the fixture. We are committed to making high quality products. Returning the fixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.

Note : This product is a smart light, using Direct Digital Controls rather than triac dimming. Here is two dimming way for you reference: Download Cloudy Bay’s APP, go to product group or single product page, adjust the brightness and CCT of while light or color light on control panel; you can also go
to home page, click product group or single product’s common function, adjust brightness and color temperature. Control with smart voice device such as Google Assistant or Amazon Alexa if you
have installed it successfully.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hamnful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di1ferent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure lnfonmation

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Installation Instructions

Component List

2X32SCREW

3PCS P4 WIRE NUT

MOUNTING BRACKET

LIGHT UNIT

USER MANUAL & VOICE CONTROL GUIDE

Instructions

TURN OFF POWER SUPPLY BEFORE YOU START INSTALLATION

Use Philips screwdriver to fix MOUNTING BRACKET CC on junction box ( junction box excluded) with SCREW AA.

Pull out live wire, neutral wire and ground wire from junction box, connect live wire to LIGHT UNIT’ s black wire, connect neutral wire to LIGHT UNIT’s white wire, connect ground wire to LIGHT UNIT’s bare cooper wire with BB, or fix both ground wires on mounting bracket’s green screw firmly.

Approach LIGHT UNIT to the MOUNTINGBRACKET CC, till LIGHT UNIT’s center hole go through screw stem , adjust stem’s length  and tighten it with hex nut one, fix LIGH  UNIT with another hex nut two.

Put on fixture’s shade and metal ring to fixture pan, fix them together with thumb nuts 6. Confirm lighting fixture fixed on ceiling firmly

Confirm the lighting fixture fixed securely.

Installation is completed, please go ahead to USER MANUAL & VOICE CONTROL GUIDE EE to complete setting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>