i-tec C31METALHDMI60HZ USB-C HDMI 60Hz Metal Adapter User Guide
- June 6, 2024
- i-tec
Table of Contents
i-tec C31METALHDMI60HZ USB-C HDMI 60Hz Metal Adapter
INTRODUCTION
Thank you for purchasing the i-tec USB-C 3.1 HDMI 60 Hz Metal Adapter that will allow you to connect HDMI monitor / TV/projector to a notebook, a tablet, a PC, or a smartphone with a USB-C port. It offers 1x 4K HDMI. Thanks to its compact dimensions, low weight, and application without a power adaptor it is also convenient for traveling.
PACKAGE CONTENTS
- i-tec USB-C 3.1 HDMI 60 Hz Metal Adapter with cable (15 cm)
SPECIFICATION
- 1x USB-C 3.1 connector, transfer rate up to 10 Gbps
- Graphic interface: 1x HDMI (spec. 1.4b); max. resolution 3840×2160 / 60Hz
- Mode: Extend, Mirror, and Primary Display
- Supported colors 16 / 32 bit
- Powered through USB bus (no power adapter is needed)
- Chipset: PS176
- OS: Requires USB-C interface with “DisplayPort Alternate Mode” support (not all devices/systems with USB-C interface supports the standard) or Thunderbolt 3 port – Windows 10 32/64bit, Mac OS X, Chrome OS (Google) with Intel Broadwell Processor and R51 and higher
- Product dimensions: 45 x 30 x 15 mm
- Product weight: 27 g
DESCRIPTION OF THE ADAPTER
- HDMI port – for connecting a monitor
- Connecting cable with USB-C connector – for connecting to a notebook, tablet, PC, or smartphone with “DisplayPort Alternate Mode” support
AFTER CONNECTING, THE DRIVERS FOR THE ADAPTER ARE INSTALLED AUTOMATICALLY FROM THE SYSTEM.
CAUTION!
Before installation makes sure that your system has installed the latest
drivers for your device and updated BIOS.
CONNECTING AN HDMI MONITOR
The adapter is equipped with 1x 4K HDMI for the connection of an external
monitor or beamer with an HDMI interface. For displaying your images you can
use modern plasma or LCD monitors and TVs. The graphic chip, which is the
heart of the adapter, supports resolution up to 4K (Ultra HD) 3840 x 2160
pixels. Connect the monitor to the adapter using a high-quality HDMI cable.
During the installation of an additional monitor the screen of the notebook,
tablet or PC can flicker which is a standard condition.
The majority of problems with the adapter and the connected peripheral devices can be solved by disconnecting the USB-C cable of the adapter from the USB-C port of the PC / Mac/smartphone and reconnecting after approximately 10 s.
SAFETY INSTRUCTIONS
- Do not expose to extreme temperatures and air humidity.
- Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.
- Save the user manual for possible use later.
In cooperation with the service department
- Check functionality after falling to water or to the ground.
- Check functionality when the cover is broken.
- Send the device back if it does not work in accordance with the user manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www. i-tec.CZ/en on the “FAQ” tab of this product.
References
- Home | i-tec
- Homepage | i-tec
- Homepage | i-tec
- Home | i-tec
- Home | i-tec
- Inicio | i-tec
- Inicio | i-tec
- Accueil | i-tec
- Accueil | i-tec
- Homepage | i-tec
- Homepage | i-tec
- Home | i-tec
- Start | i-tec
- Start | i-tec
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>