Baseus P1 Bluetooth Earphone User Manual
- June 6, 2024
- Baseus
Table of Contents
P1 Bluetooth Earphone
USER MANUAL
Connection Steps
-
Power on
Press and hold the multifunction button for 2s.
The earphones automatically enter the power-on state. -
Wireless connection
Turn on wireless mode on your phone to search and pair the earphones.
Select device model: Baseus Bowie P1 -
Power off
Press and hold the multifunction button for 4s. The earphones will turn off.
Operation Instructions
Charging power indicator
Connect to the power supply to charge the earphones (the red indicator is on during charging. The blue indicator is on when the battery is fully charged).
Restore to default settings
Turn off the wireless on the mobile phone. Press and hold the Volume+ and Volume- buttons simultaneously for 4s. When the blue indicator blinks 3 times, the operation is successful.
Product safety information
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- The battery is included in the product. Please avoid exposing your product to the sunlight, electric heater or similar overheating enviroments. Do not store the product in high temperature, strong light and strong magnetic places.
- Do not keep it in other harsh environments such as fire source. Intense physical actions such as knocking, throwing, trampling on and squeezing etc. shall be avoided. Do not use it in case of expansion.
- The ambient temperature of product is 0~45℃ .
- Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage the product or may endanger personal and property safety. Consumer shall bear for all the consequences, to which our company will not assume any legal liability.
- Decomposition of this product by non-professionals is strictly prohibited.
- Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
- Please use a clean cotton cloth to clean the charging contacts of earphones regularly to prevent it from failing to charge or turn on due to missing cleaning for a long time.
- Do not put this product in water (or washing machine). If water enters the product, let it dry naturally before using it.
Product Specifications
- Name: Baseus Bowie Series P1 Half in-ear Neckband Wireless Earphones
- Model No.: Baseus Bowie P1
- Version: V5.2
- Communication distance: 10m
- Playtime: 25 hours (70% of the volume)
- Battery capacity: 170mAh/0.629Wh (earphones)
- Earphone rating input: DC5V 10 mA
- Earphone rating consumption current : 7 mA Charging time: about 1.5 hours
- Frequency response range: 20 Hz-20 kHz
- Charging port: Micro-USB
- Suitable for: Compatible with most of wireless devices
Package Including
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This equipment complies with the provisions of Directive 2012/19/EU、2006/66/EU. It is strictly forbidden to dispose of this equip-ment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
It is hereby declared that Baseus Bowie P1，a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www. baseus.com