WYZE WVDB1A Video Doorbell User Guide
- June 6, 2024
- Wyze
Table of Contents
QUICK START GUIDE
IN THE BOX
Wyze Video Doorbell × 1
Wyze Chime × 1
Wall Plate × 1
Wedge × 1
Wiring Cap × 4
Fuse × 1
Extension Wires × 2
Screw Assembly × 1
Quick Start Guide × 1
SETUP
- Download the Wyze app and sign in or create an account. Follow the instructions in the Wyze app to finish installation
DOWNLOAD THE APP BY SCANNING THIS QR CODE
OR DOWNLOAD DIRECTLY FROM THE APPLE APP STORE OR GOOGLE PLAY
https://www.wyze.com/wyze-app/
- Open the Wyze app and Tap the + plus sign on the top left of the Home screen. Tap “Add Device” and then select Wyze Video Doorbell
*Detailed installation steps are available in the Wyze app. - Add Wyze Chime, select continue adding filters. Follow the instructions in the Wyze app to finish installation.
Select “Add Later”. You can add a Wyze Chime device by selecting “Device Settings” and tapping “Extended Devices”.
INSTALLATION
| Installing without the wedge | Installing with the wedge |
|---|
Plug the Wyze Chime into an outlet.
|
LIGHT INDICATIONS
Wyze Video Doorbell
| Solid yellow light
The device is powered
---|---
| Flashing yellow light
Waiting for connection
| Flashing yellow/blue light
Connecting to router
| Flashing blue light
Connecting to the external network
| Solid white light
Connected
Wyze Chime
| Solid yellow light
The device is powered
---|---
| Flashing blue light
Connecting to network
| Solid blue light
Connected
WYZE VIDEO DOORBELL
FCC WARNING:
Any change or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
ISEDC RSS WARNING
This device complies with ISEDC licence-exempt RSS standard (s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
ISEDC RADIATION EXPOSURE STATEMENT:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
WYZE CHIME
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
ISEDC RSS WARNING
This device complies with ISEDC licence-exempt RSS standard (s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NEED HELP?
Contact our support wizards:
https://support.wyze.com
Resources & Support
support.wyze.com
https://support.wyzecam.com/hc/en-us
Scan the QR code to learn more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>