anko 43007721/20YX02Blue Bluetooth Portable Speaker User Guide
- June 7, 2024
- Anko
Table of Contents
Model: 43007714/20YX02Red
43007721/20YX02Blue
43007738/20YX02Blush
Bluetooth speaker
PRODUCT GUIDE
What’s inbox
Warning
- Working temperature: 0 – 45˚C.
- The battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Power on/off
Power on: press and hold for 3s until you hear the ‘power on’ prompt voice.
Power off: press and hold for 5s until you hear the ‘power off’ prompt
voice.
In pairing mode but not connected beyond 5 mins, the speaker will power off
automatically.
Bluetooth pairing
Press and hold for 3s until the “power on” tone is heard and then Blue LED will flashes, which means the speaker is in pairing mode. Make sure Bluetooth on your audio device is available. Pairing name “Anko BT speaker” will appear on the list, and then click it to connect. When pairing success, you will hear a “Connected” prompt tone. The Blue LED will flash every 5 seconds.
Bluetooth speaker will automatically search and reconnect to the last paired Bluetooth device. When successful, there is a “connected” voice reminding.
TWS Function
Speaker support TWS function. Power on two speakers, when speakers are in
pairing mode, single-click any one of the two speakers, then there is “Du”
voice reminding, which means two speakers already connected to each other. The
Blue LED of the master speaker goes on.
When power on the two speakers next time, they can automatically reconnected.
Play music
Press and hold to adjust the previous/ next song.
Volume+ &-：Single click
Play/pause music: Single click
Phone call
Wired connection
If there are no Bluetooth devices available or you simply prefer a wired connection, you can connect the Bluetooth speaker directly to your audio device by using the audio cable.
Charging
Speaker comes with a lithium-ion battery. For best result, fully charge speaker before use. When charge, plug the micro USB cable into the speaker and plug the standard USB connector into a power source. During charging, the Red LED is always on. When fully charged, light off.
Trouble Shooting and Common Situations
Speaker cannot power on
Battery drain, please charge the device for 30 minutes, and then power on.
A smartphone cannot search Bluetooth Speaker
- Make sure the speaker is in pairing mode ( Blue LED flashing alternately)
- Delete pairing list in smartphone and searching Speaker again.
- If it still cannot be found, please restart the smartphone and Speaker again.
Speaker will be disconnected from time to time
- The battery drain.
- The Speaker is beyond the communication range(10m).
No sound on talking mode
- Confirmed the Speaker connected to earpiece mode on talking.
- Try to volume up Speaker or smartphone.
No sound with music playing
- Try to volume up Speaker or smartphone.
- Speaker disconnected from smart phone，please reconnected again.
Cannot charger for Speaker
- The charger cable connected was not well.
- The charger line was damaged.
Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This warranty is
in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair, or exchange
(where possible) for this product if it becomes defective within the warranty
period. Kmart will bear the reasonable expense of claiming the warranty. This
warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse, or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
or alternatively, via Customer Help at Kmart.com.au for
any difficulties with your product. Warranty claims and claims for expenses
incurred in returning this product can be addressed to our Customer Service
Centre at 690 Springvale Rd, Mulgrave VIC 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss and damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>