SUNELL SN-T5H-P Bi Spectrum Network Camera User Guide

SUNELL SN-T5H-P Bi Spectrum Network Camera

Product Information

The Bi-Spectrum Network Camera is an electronic surveillance device that comes with a quick setup guide and accessories. It is designed for use in public places and requires strict adherence to installation requirements to prevent device damage, data loss, and unpredictable outcomes. The camera should be installed in a closed environment to maintain accurate measurement temperatures. The device should be cleaned with a soft dry cloth or neutral cleanser for stubborn dirt. The manufacturer will update the manual regularly to reflect product function enhancement or changes.

Product Usage Instructions

1. Precautions: Before using the device,thoroughly read and understand this document. Observe all rules in this document to avoid fire and severe injuries.

2. Open Package Examination: Open the package and check the product’s appearance for any obvious damage. Confirm that the item list in Table 1-1 and 1-2 is consistent.

3. Installation: Strictly observe the installation requirements provided in this document when installing the device. Avoid heavy loads, intensive shakes, and soaking to prevent damage during transportation and storage. If the camera is installed outdoors, build a closed environment to keep the measurement temperature accurate. Do not jam the ventilation opening.

4. Cleaning: Clean the device with a soft dry cloth. For stubborn dirt, dip the cloth into slight neutral cleanser, gently wipe the dirt with the cloth, and then dry the device.

5. Warnings: Neglecting risks may cause device damage, data loss, device performance deterioration, or unpredictable results. Keep the device away from heat sources such as radiators, electric heaters, or other heat equipment. Keep the device away from moist, dusty, extremely hot or cold places, or places with strong electric radiation. Remove the power plug if the device is idle for a long time.

6. Special Announcement: All complete products sold by the manufacturer are delivered along with nameplates, a quick setup guide, and accessories after strict inspection. The manufacturer will not be held responsible for counterfeit products.
   This manual may contain misprints, technology information that is not accurate enough, or product function and operation description that is slightly inconsistent with the actual product.

7. For more information: Refer to the website.

Precautions

Fully understand this document before using this device, and strictly observe rules in this document when using this device. If you install this device in public places, provide the tip “You have entered the area of electronic surveillance” in an eye-catching location. Failure to correctly use electrical products may cause fire and severe injuries.

WARNING

• Strictly observe installation requirements when installing the device. The manufacturer shall not be held responsible for device damage caused by users’ non-compliance to these requirements.
• Strictly conform to local electrical safety standards and use power adapters that are marked with the LPS standard when installing and using this device. Otherwise, this device may be damaged.
• Use accessories delivered with this device. The voltage must meet input voltage requirements for this device.
• If this device is installed in places with unsteady voltage, ground this device to discharge high energy such as electrical surges in order to prevent the power supply from burning out.
• When this device is in use, ensure that no water or any liquid flows into the device. If water or liquid unexpectedly flows into the device, immediately power off the device and disconnect all cables (such as power cables and network cables) from this device.
• Do not focus strong light (such as lighted bulbs or sunlight) on this device. Otherwise, the service life of the image sensor may be shortened.
• If this device is installed in places where thunder and lightning frequently occur, ground the device nearby to discharge high energy such as thunder strikes in order to prevent device damage

CAUTION

• The normal operating temperature of the camera is 0°C~+50°C(32°F~122°F). Please ensure that the device is used within this ambient temperature range. If you need to measure temperature, please install the device in 0°C~35°C(32℉~95℉) indoor environment without wind to keep accuracy. Use beyond the temperature range may cause abnormal display of the thermal imaging camera image, and long-term work will damage the equipment.
• Avoid heavy loads, intensive shakes, and soaking to prevent damage during transportation and storage. The warranty does not cover any device damage that is caused during secondary packaging and transportation after the original packaging is taken apart.
• If the camera is installed outdoors, user needs to build a closed environment to keep the measurement temperature accurate.
• Clean the device with a soft dry cloth. For stubborn dirt, dip the cloth into a slight neutral cleanser, gently wipe the dirt with the cloth, and then dry the device.
• Do not jam the ventilation opening. Follow the installation instructions provided in this document when installing the device.
• Keep the device away from heat sources such as radiators, electric heaters, or other heat equipment.
• Keep the device away from moist, dusty, extremely hot or cold places, or places with strong electric radiation.
• Remove the power plug if the device is idle for a long time.
• Before unpacking, check whether the fragile sticker is damaged. If the fragile sticker is damaged, contact customer services or sales personnel. The manufacturer shall not be held responsible for any artificial damage of the fragile sticker.

Special Announcement

• All complete products sold by the manufacturer are delivered along with nameplates, quick setup guide and accessories after strict inspection. The manufacturer shall not be held responsible for counterfeit products.

• The manufacturer will update this manual according to product function enhancement or changes and regularly update the software and hardware described in this manual.
  Updated information will be added to new versions of this manual without prior notice.

• This manual may contain misprints, technology information which is not accurate enough, or product function and operation description that is slightly inconsistent with the actual product, the final interpretation of company is as a standard.

• This manual is only for reference and does not ensure that the information is totally consistent with the actual product. For consistency, see the actual product.

NOTE

For more information, please refer to website.

Open Package Examination

Open the package, check the appearance of the product for no obvious damage, and confirm the item list for table 1-1 and 1-2 are consistent.

Device Structure

Device Ports

Different devices may have different ports and multi-head cables, please refer to the actual product

Table 2-1 Multi-head cable description

for audio function
3| Audio out| Receives an analog audio signal from devices such as a sound pickup device.
4| Alarm in 1| Alarm input port 1| Applied for alarm function
5| Alarm in 2| Alarm input port 2
6| Alarm out 1| Alarm output 1
7| Alarm out 2| Alarm output 2
8| Power port of camera| Connect to DC 12V, the power adapter be connect to the one in two line.|
9| RS485| RS485 port, connect to black body signal.|
10| Black body signal| connect to 9 RS485 port, the yellow line plug in +, the white line plug in -.|
11| Power port of black body| Connect to DC 12V, the power adapter be connect to the one in two line.|

Device Installation

Install Black-body

• Step 1 Confirm the No. of the package box, the NO. of the camera and black body is the same. Take out the camera and black body, and confirm the No. label on the bodies are the same as the box. As shown in Figure 3-1.
  Figure 3-1 Confirm No.

• Step 2 Install the black body as shown in Figure 3-2

• Step 3 Take out the PM 2.5 x 8mm screws, and install the screws in the holes above.

• Step 4 Take out the PA 2.6x 10 mm self-screws, and install the screws in holes at the bottom, as shown in Figure 3-3.

• Step 5 Take out the double-sided tape to stick on the camera to place the lines of the black body, as shown in Figure 3-4.

Install Black-body
To adjust the position of the black body, the user needs to log in to the web to show channel 2(thermal channel), the image of the black body is quite showing, and the bracket is not showing, as shown in Figure 3-5.

Install camera
There are many modes to install the camera, it depends on the environment. The installation modes as the figures show.

CAUTION
The advised height of the camera installation is 2.2 to 2.3 meters. The camera should be installed indoors, and there is no wind at ambient, the temperature is 0℃ ~ 35℃（32℉~95℉）.

Device Installation

At Configuration > Temperature Measurement interface, user can set the temperature parameters of measurement, such as parameter configuration, ambient temperature, thermal mapping, bad point check, thermal calibration, and measure verification.

Thermal calibration

The camera is carrying a black body, and the temperature is calibration before leaving the factory. The user just needs to enable and draw the black-body frame to use this function, as shown in Figure 4-1. Enable the display area info, the live video will show the temperature and frame of the black body .
Figure 4-1 Thermal calibration

Thermal mapping

• Set three points to map images of the thermal channel and visual channel.
• Before set the mapping point, user should adjust the visual channel to make sure two channels are the same view angle.
• Choose the point, and click the locations at both channels.
• Repeat the upper step three times to set three points( point 1 is green, point 2 is red, and point 3 is blue). The points should be distributed widely, as shown in figure 4-2
• If there are a little deviation between two frames, you can click fine tuning to adjust the frame position. Or input the value to adjust the horizontal shift and vertical shift.

CAUTION
The images have been calibrated before leaving the factory and can be used directly. If the face detection frame deviated on the face, it needs to be re- calibrated

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>