EZCASTMINI Wireless Display Receiver User Guide

Wireless Display Receiver
Quick Start Guide
rev 1.0

Introduction

EZCast supports multiple wireless display standards, including EZCast, Miracast, DLNA, and EZAir (compatible with iOS and macOS). Ongoing firmware upgrades are provided to support latest operating systems. Please read this guide to install and set up your EZCast. Happy Casting! Support@EZCast.com

Learn More

Visit https://www.EZCast.com for more information.
Visit https://www.YouTube.com/EZCast for video tutorials.

Software Installation

Visit https://www.EZCast.com/app to download platform-specific applications and User Manual.
Scan the QRCode below to download EZCast mobile App.

http://www.ezcast.com/upgrade/download.php?&vendor=ezcast

Hardware Installation

1. EZCast to power: Turn on your TV and power up EZCast dongle by connecting the USB cable to an adapter (5V1A).
2. EZCast to TV: Plug EZCast dongle into a HDMI port on TV.
3. Select source: Set your TV’s source/input selection to HDMI port connected to the EZCast dongle.
4. Connect successfully: Your TV screen shall display the instructions once EZCast is connected successfully. Please follow the instructions to complete setup.

Setup for smart device Android  iOS

1. Download EZCast app: Scan QRCode on TV screen or search “EZCast” on Google Play/App Store.
2. Connect WiFi: (1) Launch EZCast App and click Searching Device icon. (2) Click “Scan QRCode to connect WiFi” to scan QRcode on TV screen. (3) Setting shall pop out (or click Side-bar Menu to find). Click Internet and connect to your WiFi.
3. Connect to EZCast: Searching Device shall pop out when WiFi is connected. Find and click EZCastCS_xxxxxxxx in the list below).

Screen Mirroring for Android

EZCast/ Mirror
Click the Mirror icon on the top bar.
Note: For EZCast/ Mirror, it only captures the screen without sound due to limitations in Android. To mirror the sound to your TV, please use EZMirror instead.

Google Home
You may download Google Home App from Google Play. Launch the Google Home App, log in with Google account. Then you may mirror to EZCast using Google Home.
Note: Make sure that EZCast and your Android device are both connected to same WiFi. Steps: Account > Mirror Device > Cast Screen/Audio > Cast to > EZCasCSt_xxxxxxxx

Miracast
Mirror to EZCast using Miracast if your Android devices support Smart View on Samsung, Multi-screen on Huawei, or etc.

Screen Mirroring for iOS

Airplay
Screen mirroring may be done by Airplay on iOS smart devices. Swipe to show Airplay, click Screen Mirroring and choose EZCastCS_xxxxxxxx.

Setup for laptop Windows MacOS

1. Download and install EZCast application: Download at https://www.ezcast.com/app

2. Connect to WiFi:
   (1) Click WiFi list from your laptop and connect to your EZCastCS_xxxxxxxx by entering PSK password on TV screen. (2) Launch EZCast application, with your EZCast device connected automatically which shows at upper right, Setting shall pop out (or find from sidebar). Click Internet and

3. connect to your WiFi.Connect to EZCast: Click Searching Device to find and select your EZCastCS_xxxxxxxx.

4. Screen Mirroring: Click Mirroring in EZCast application.

EZCast Settings

Internet: Connect EZCast to WiFi.
Device Name: Change device name of EZCast.
WIFI Password: Change password of EZCast hotspot.
Display: Set display mode to game and video.
Resolution: Change output resolution.
Language: Change language preference.
EZAir Mode (only for iOS): Switch mirroring mode of EZCast between “mirror only” and “mirror + streaming” for iOS devices.
Autoplay: Automatically start video streaming from Internet once your EZCast dongle is connected to WiFi.
Upgrade: Connect EZCast to home router in advance, and the latest version of EZCast firmware shall be downloaded. Please do NOT turn off the Wifi and the power of EZCast during firmware upgrading.
Reset to default: Reset EZCast to default settings.

Features of EZCast

EZChannel: Create an EZCast account and bind with EZCast to have best experiences.

1. Discover and personalize your video channels.
2. Search videos across different sites.
3. Auto-play: Automatically start video streaming from Internet once your EZCast dongle is connected to WiFi.

Video/ Photo/ Music: Stream and playback local media files from Android/ iOS/ Windows/ MacOs to EZCast dongle wirelessly.
Live Camera: Capture videos from local camera to EZCast dongle.
DLNA: Stream multimedia files via DLNA protocol.Cloud Storage: Access data from Cloud server (Dropbox, Google drive, or etc.).
Voice Control: Pair EZCastCS with any Google Home device/ Amazon Echo Dot, and stream entertainment just by asking orally.
(1) Google Home/ Assistant:
e.g. Say,“Hey Google, ask EZCast to play holiday video.” to control. User Manual please refers to website as below. https://support.google.com/assistant/answer/7394306?co=GE-
NIE.Platform%3DAndroid&hl=en
(2) Amazon Echo Dot:
e.g. Say, “Alexa, play holiday video.” to control. More info see:
https://www.amazon.com/gp/help/customer/display.html?nodeId=201994280)

©2019 Actions Microelectronics Co., Ltd. All right reserved. EZCast are trademarks of Actions Microelectronic Co., Ltd., registered in US, Europe, and other countries. Other product and company names mentioned herein may be trademarks other respective companies.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body

Airplay Screen mirroring may be done by Airplay on iOS smart devices. Swipe to show Airplay, click Screen Mirroring, and choose EZCastCS_xxxxxxxx.

Screen Mirroring

Screen Mirroring EZCastCS_xxxxxxxx

Setup for laptop (Windows/ MacOS)
1 Download and install EZCast application: Download at https://www.ezcast.com/app
2 Connect to WiFi: (1) Click WiFi list from your laptop and connect to your EZCastCS_xxxxxxxx by entering PSK password on TV screen. (2) Launch EZCast application, with your EZCast device connected automatically which shows at upper right, Setting shall pop out (or find from side bar). Click Internet and connect to your WiFi.
3 Connect to EZCast: Click Searching Device to find and select your EZCastCS_xxxxxxxx.
4 Screen Mirroring: Click Mirroring in EZCast application.

Setting 2

4

Mirroring 3

Searching Device

EZCastCS_xxxxxxxx

EZCast Settings
Internet: Connect EZCast to WiFi.
Device Name: Change device name of EZCast.
WIFI Password: Change password of EZCast hotspot.
Display: Set display mode to game and video.
Resolution: Change output resolution.
Language: Change language preference.
EZAir Mode (only for iOS): Switch mirroring mode of EZCast between “mirror only” and “mirror + streaming” for iOS devices.
Auto play: Automatically start video streaming from Internet once your EZCast dongle is connected to WiFi.
Upgrade: Connect EZCast to home router in advance, and the latest version of EZCast firmware shall be downloaded. Please do NOT turn off the Wifi and the power of EZCast during firmware upgrading.
Reset to default: Reset EZCast to default settings.

Features of EZCast
EZChannel: Create an EZCast account and bind with EZCast to have best experiences. (1) Discover and personalize your video channels. (2) Search videos across different sites. (3) Auto-play: Automatically start video streaming from Internet once your EZCast dongle is connected to WiFi.
Video/ Photo/ Music: Stream and playback local media files from Android/ iOS/ Windows/ MacOs to EZCast dongle wirelessly.
Live Camera: Capture videos from local camera to EZCast dongle.
DLNA: Stream multimedia files via DLNA protocol.
Cloud Storage: Access data from Cloud server (Dropbox, Google drive, or etc.).
Voice Control: Pair EZCastCS with any Google Home device/ Amazon Echo Dot, and stream entertainment just by asking orally.
(1) Google Home/ Assistant: e.g. Say,”Hey Google, ask EZCast to play holiday video.” to control. User Manual please refers to website as below.
https://support.google.com/assistant/answer/7394306?co=GENIE.Platform%3DAndroid&hl=en
(2) Amazon Echo Dot: e.g. Say, “Alexa, play holiday video.” to control. More info see:
https://www.amazon.com/gp/help/customer/display.html?nodeId=201994280)

©2019 Actions Microelectronics Co., Ltd. All right reserved. EZCast are trademarks of Actions Microelectronic Co., Ltd., registered in US, Europe, and other countries. Other product and company names mentioned herein may be trademarks other respective companies.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body

References

• Access Google Assistant with your voice - Android - Google Assistant Help
• Universal wireless screen mirroring solution - EZCast
• Download EZCast app for all OS - EZCast

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>