EZCast B088H2HNCR V3 Beam Projector User Guide

: June 3, 2024
: EZCast

EZCast B088H2HNCR V3 Beam Projector

Thank you for purchasing the EZCast Beam projector. Our product combines the easy to use interface, portability, and cross platform compatibility, to let you enjoy projecting media from Android, iOS phones and tablets, as well as Windows and MacOS laptops, anytime, anywhere.

EZCast app installation

Please visit www.EZCast.com/app to download EZCast app for every supported platform. Mobile devices can proceed to the relevant download area by scanning the QR code below. (iOS users can search for EZCast in the App Store to download the app) (Android users can search for EZCast in Google Play to download the app)

Precautions

How to use the projector

Do not turn the lens toward human eyes when in operation, to avoid damaging the eyes caused by the high intensity light source.
Do not block the device ventilation to avoid damage to the internal electronic devices due to overheating.
Do not use chemicals, cleaning agents or clean water to clean the device, and prevent rain water, moisture and mineral-containing liquids from corroding circuit boards.
Please keep the device and its parts and accessories out of reach of children.
Please ensure that the device is operated in a dry and ventilated environment.
Do not store the device in extreme hot or cold conditions. High and low temperatures may shorten the lifespan of electronic devices. The normal operating environment is between 5°C~30°C.
Do not put the device into any drying equipment (such as dryer, microwave oven, etc.).
Do not squeeze or place heavy objects over the device to avoid damage to the device.
Do not throw, knock or shake the device violently, which may damage the internal circuit boards.
Do not attempt to disassemble the device without permission. If there is any problem, please contact customer support.
Do not repair any product by yourself. If the device or any part does not work properly, you should consult customer support or return the device for repair.
It is recommanded to shut down for 30minutes after playing for more than 8 hours.
Never look directly into the projector lens when the lamp is turned on.The bright light can damage your eyes.Never let children look into the lens when it is on.

Never look directly into the projector lens when the lamp is turned on.The bright light can damage your eyes.Never let children look into the lens when it is on.

EZCast Beam body and remote

How to set up EZCast Beam projector

Preparation

Plug the power to the projector, and the power button will light up.
Insert the wireless adapter into the wireless kit port of the projector.
To turn on projector, hold the power button of the projector for 3 seconds till you hear the “beep” sound and the light will turn blue.
Adjust focus ring until the projection image is clear and focused.

Projector stand and holders

Normal mode: When projecting forward, adjust elevation angel by loosening the projector stand under the projector. When projecting upward, use the holders to avoid blockage of ventilation.
Portrait mode: Equip the projector holders at the bottom to make sure the ventilation works well.

First time settings

Select the start-up language.
Wi-Fi setting: connect the projector to your router and enter the password. (Important)
After starting up, enter the main menu and select the functions by arrow keys on the projector or remote control: Android, iOS, MacOS,
Windows, Speaker, EZCast, Multimedia, HDMI, Type C (only for H3 model), and Setting, as below shown:

Power off:

Sleeping mode: press the power button and hear the “beep” sound with the power button still blue.
Power off: hold the power button for 3 seconds till you hear the “beep”sound twice, and the power button turns red.

Multimedia playback

Insert a USB flash drive into USB1 port or insert SD Card to SD Cardslot on the projector.
Select the “Multimedia”>>”USB Disk” or “SD card”>>”Video”, “Music” or “Photo” to enter the file folder.
Select the file to play with the up and down arrow keys, and press “OK” to confirm.
When playing media, press “OK” to see the menu, and select item by the left and right keys.
Support format: video, audio, and image.

Settings

Select the “Setting” key on the projector or remote control, and press “OK” to confirm.

Wi-Fi setting : Select the “Wi-Fi setting” menu and enter the Wi-Fi setting interface, select the “Internet”, press “OK” key to confirm, and select the router from AP list and enter the password.
Display mode: Swtich standard/ bright mode.
Portrait mode: Switch on to project vertically. Please make sure NOT to block the ventilation. *Note: Auto mode is supported only for H3 model.
V.Keystone: Manually vertical keystone adjustment up to ±25 degrees (Auto adjustment for H3 model).
H. Keystone: Manually adjust horizontal keystone up to ±14 degrees.
4 Corner Correction: Choose the corner to be adjusted and use arrows to change the location.
Color Setting: Change brightness, Contrast, Saturation, Sharpness, R/G/B Gain, and R/G/B Offset.
Firmware Upgrade: Upgrade via USB drive or through internet.
Projector Location: Switch to Front/ Front Ceiling/ Rear/ Rear Ceiling.
Language: Change language with arrows.
Reset All: Choose yes to reset projector to factory default. All saved changes to Setting are lost. The projector will be restored to the factory settings, and the data adjusted by the user will not be saved.

How to Plug and Play (via USB cable)

Android

Select Android on main menu of the projector, and then select Plug and Play by pressing “OK” key.
Connect your mobile to the projector via mobile USB data cable.
Download and install MiraPlug app.
Replug the cable and it will start casting automatically.

iOS

Select the iOS on main menu of projector, and then select Plug and Play menu by pressing “OK” key.
Connect your mobile to the projector via mobile USB data cable, and then choose “Trust This Computer” to start your projection.
Note: If there’s a black screen after connecting to mobile, please reboot your mobile and then try again.

Windows

Select Windows on main menu of projector, and then select Plug and Play menu by pressing”OK” key.
Install EZCast app on your PC.
Please visit https://www.ezcast.com/app to download EZCast app.
Connect your PC to the projector via USB A-to-A cable.
Launch EZcast app on your PC and click icon.
Find and select “Beam-XXXX” from “Search device”, and click to mirror.

MacOS

Select MacOS on main menu of projector, and then select Plug and Play menu by pressing “OK” key.
Install EZCast app on your PC.
Please visit https://www.ezcast.com/app to download EZCast app.
Connect your PC to the projector via USB A-to-A cable.
Launch EZcast app on your PC and click icon.
Find and select “Beam-XXXX” from “Search device”, and click to mirror.

How to Wireless Display

Android

Select Android on main menu of projector, and then select Wireless menu by pressing “OK” key.
Select mirroring function in the setting of your phone and
find”Beam-XXXX” device shown on device list to start your mirroring.
Note 1: The naming of mirroring function varies different brands.
Visit https://www.ezcast.com/usage/android/ezmirror for demos.
Note 2: Compatibility: Android 5.0 or above.

iOS

Select iOS on main menu of projector, and then select Wireless menu by pressing “OK” key.
Make sure both of your projector and mobile are connected to the same WiFi router.
Go for Screen Mirroring of your mobile and select the ”Beam-XXXX” shown on the list to start projection.
Note: Compatibility: iOS 12 or above.

Windows 10

Select Windows on main menu of projector, and then select Wireless menu by pressing “OK” key.
Make sure both of your projector and computer are connected to the same Wi-Fi router.
Click quick key by on the computer, and connect to the device named by “Beam-XXXX” to start your projection. MacOS
Note: Please upgrade your windows 10’s operation system to the lastest version.

MacOS

(1) Select MacOS on main menu of projector, and then select Wireless menu by pressing “OK” key.
(2) Make sure both of your projector and computer are connected to the same Wi-Fi router.
(3) Click for Screen Mirroring icon on your computer and select the ”Beam- XXXX” shown on the list to start your projection.

Google Home Screen Mirroring (Android Only)

Select Android on main menu of projector, and then select Google Home menu by pressing “OK” key
Make sure both of your projector and mobile are connected to the same WiFi router
Download and install Google Home app from Google Play Store.
Launch Google Home app and choose device name: Beam-xxxx > Cast my screen > Cast screen

Speaker

Select “Speaker” to use Beam projector as an external speaker.
Connection:
Turn on settings of your mobile or computer, and find Beam-XXXX in the list to connect. The projection screen will turn black during connection.
Disconnection:
Press “back” key on projector chassis/ remote control, or disconnect from the device list of your mobile or computer. The projection screen will turn on again after disconneted.

EZCast

(1) Select EZCast on main menu of projector and make sure both of your projector and mobile are connected to the same Wi-Fi router.
(2) Install EZCast app on your device. Please download the app from application market for your mobiles or visit https://www.ezcast.com/app to download EZCastapp for PC.
(3) Launch EZCast app on your device, and then click icon and select the ”Beam-XXXX” shown on the list to start your projection.

DLNA streaming

(1) Select EZCast on main menu of projector and make sure both of your projector and mobile are connected to the same Wi-Fi router.
(2) Launch the app that support DLNA, such as QIY, QQTV.
(3) Click the DLNA icon on the video you’d like to play, and select “Beam- XXXX”.
Note: DLNA icon usually shows in the corner of the video, and looks like
a tv which depends on different apps.

FAQ

Problems	Solutions
No electricity/can’t power on

Check whether the power cord is connected properly.
Press the Power button for 3 seconds till you hear the “beeping” sound, and then release the button and wait for the projector to start up.

Unable to screen mirroring|

Make sure wireless adapter has been installed to wireless kit port on the projector.
Refer to the Quick Guide to make sure you are using the correct screen mirroring function.
If the screen stutters or lags, the distance between source and projector is too far.
Make sure the phone is connected to the SSID of the projector.

Unable to play online media|

Check whether the network connection is normal.
Check whether the wireless adapter is inserted into the Wireless kit port.

Abnormal casting/ black screen|

Make sure the ventilation works without blocked.
Long press the Power button to shut down.
Wait for the projector to cool down, and then press Power button to turn on again.

Unable to upgrade online|

Check if the Wireless adapter is inserted into the Wireless kit port.
Check whether the network connection is normal.
Select OTA upgrade in the Setting.
Check whether there is a newer firmware version available to upgrade.

Cannot focus image|

Confirm whether the projecting distance is appropriate, and try to extend the distance between projector and screen.
Check whether the lens is clean.

Remote control not functional| Replace the batteries of remote control.
Unable to shut down| Press the Power button for about 10 seconds to force the shut down.

Warranty

The defective product is valid for refund and replacement if claimed with proof of purchase and warranty card within 7 days of purchase, and the defect was not caused by inappropriate usage or mishandling of product.
Product warranty is limited to 12 months within the purchase date, and covers the main projector only. The warranty does not cover accessories and defects caused by inappropriate usage or mishandling of product. The warranty claim is only valid with proof of purchase and warranty card.
Register the warranty online to ensure your rights: