EZCast Pro B10 Box II Multidisplay Receiver with 5 GHz and LAN Support User Guide

EZCast Pro B10 Box II Multidisplay Receiver with 5 GHz and LAN Support

Introduction

Thank you for purchasing EZCast Pro Box II. This Quick Start Guide is designed to guide you through the installation. EZCast Pro Box II realizes the true BYOD meeting room by supporting Windows, macOS, Android, iOS, and ChromeOS.

Learn More
Please visit www.ezcastpro.com for more information.

Package Contents

System Requirements

• Windows 7/8/10
• macOS 10.11 and above
• Android 5.0 and above
• iOS 10.0 and above
• ChromeOS

*Please note that all specifications are subject to change without prior notice.

Hardware Overview Part I

Back Panel

reset to factory default setting
USB Port| For USB HID Reverse Control
Ethernet Port| Support PoE and Gigabit internet access by connecting to RJ45 cable
HDMI Port| Support HDMI Output by connecting to HDMI A to A cable

LEDs

Product Installation

1. Step 1: Connect the Universal 5V Adapter to the EZCast Pro Box II’s DC port.
2. Step 2: Connect the HDMI A to A cable to the EZCast Pro Box II’s HDMI port.
3. Step 3: Press the Power button to activate EZCast Pro Box II.

For better Wi-Fi connection, please place the EZCast Pro Box II in line of sight. If you need to output VGA signal, please use the HDMI to VGA adapter we bundled.

Cast with EZCast Pro App

1. Step 1: Scan the QRCode below to download the EZCast Pro App.
2. Step 2: Install EZCast App on your device.
3. Step 3: Find EZCast Pro Box II’s SSID in your device’s Wi-Fi list, enter the password.
4. Step 4: Open EZCast Pro App and connect to the EZCast Pro Box II.
5. Step 5: Start casting or using the alue-added functions in EZCast Pro App!

Cast with Native Protocol

Miracast
For Windows user, please press Win + K. and select your EZCast Pro Box II.

For Android user, find “Wireless casting” in Setting to select your EZCast Pro Box II. Please note that each mobile device manufacturer has its own naming rule for Miracast.

AirPlay

1. Step 1: Find EZCast Pro Box II in your device’s Wi-Fi list, and enter the password.
2. Step 2: Open “Screen Mirroring” in your device to select your EZCast Pro Box II.

Specifications

EZCast Pro Box II B10

CPU

|

Dual Core CPU, 1Ghz max

Output/Input

Resolution

|

Up to 4K @ 30Hz

I/O

| HDMI

Ethernet USB Type A

Wi-Fi

| 802.11ac 2T2R,

Max bandwidth 866Mbps (5Ghz)

Ethernet

|

10/100/1000M, support POE

Power

|

DC 5V, 2A

Working Temp

|

0~40°C

Storage Temp

|

-20~70°C

Safety Notice

1. Read and follow all these safety instructions.
2. Heed all warnings.

WARNING: DO NOT expose this product to rains or moisture.

WARNING: DO NOT use this product in the location where it might be submerged by water.

WARNING: Place this product indoor and away from windows and doors to avoid lighting strikes.

Compliance

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

References

• Professional Wireless Presentation Solutions From EZCast Pro
• Professional Wireless Presentation Solutions From EZCast Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>