MiBOXER ACT240W AC Triac RF + Push Dimmer User Manual

MiBOXER ACT240W AC Triac RF + Push Dimmer

Features

• RF+ Push AC phase-cut dimmer, l channel output.
• To dim and s,vitch single color dimmable LED lamps,
• lrodilionol inccrndescenl ond hologen lighls
•  2S6 levels 0-100% dirnrning srncclhly wilhoul crny rlosh
• Leoding edge dirnrning or !roiling edge dirnrning sel by dip swilc:h
• /V\in brightness can be set by key.
• Compatibility with RF 2.4G single zone or multiple zone dimming remote control
• Connect with external push switch to achieve on/off and 0-l 00’7 dimming function
• Cosy le be ploc:ed in slcrndmd woll junc:lion box behind CJ push swilc:h
• Over-heol / Over-lcod prcleclicn recover oulornolicolly

Technical Parameters

Compatible Load Types

Mechanical Structures and Installations

Wiring diagram

Leading edge or trailing edge dimming setti

Select leading edge(forward-phase) dimmer or trailing edge(reverse-phase) dimmer lo dirnrnoble U:::D lighl or

Min brightness setting

Long press /V\in set key for 2s, the light blink 2 times, ready for min brightness set, lhen shorl press Min sel key 1-6 lo gel 6 brighlness I 0′.t, lhe lighl will oulpul lhe nmenl brighlness irnrnediately Long Min sel key for 2s  Bs, quil brighlness sal, lhe lighl will culpul I 00′.t brighlness aulornolirnlly

Match Remote Control (two match ways)

Use the controller’s Motch key
Match: Short press match key. imr1edia-ely press on/off key (single zone rernote) or zone key (multiple zone remo-e) of -he rer1ote.
Delete: Press ond held rnatc:h key for 5s to delete all motd1, The light blinks 5 times means all matched remotes were deleted

Use Power Restart

Match: Switc:h df the then switc:h en power again immediately short press on/off key (single zone remote)
Delete: Switc:hdf the then switc:h en immediately short press on/off key (single zone remote) (multiple zone remote) 5 times an the remote. The light blinks

Application notes

All the receivers in the same zone RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, long there receiver within 30m, the remote control distance can be limitless Auto- synchronization: ,10,ulliple  30rn dislonce con worksynchronously when I hey me c:onlrolled by lhe Receiver ploc:ernenl orrer up lo 30rn CCC’tmcciu,licc dislonce Melols ond ciher rnelol  Strong signal such as V\liFi routers and microwave ovens will affect the range. V\le recommend for indoor applications that receiver placements should be no further apart than 15m

Each receiver(one or more) in a different zone, like zone l, 2, 3 or 4.

Push Dim Function

Short press: Turn an or all light Long press (l-6s): Press and hold to step- less \/Vith every ether Ieng Dimming memory: Light returns ta the previous dimming level ,vhen switched off and an again even at power failure

Malfunctions analysis & troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>