AUKEY EP-M1-PRO ANC True Wireless Earbuds User Manual

AUKEY EP-M1-PRO ANC True Wireless Earbuds

Thank you for purchasing the AUKEY EP-M1 Pro True Wireless Stereo earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

In the Box

Specifications

Battery Life

| ≈30h (with case)

≈5h (buds only)

Earphones Impedance| 32Ω
Maximum Output Power| 5mW
Frequency Range| 20Hz-20KHz
Microphone Sensitivity| -42dB@1KHz
Battery Capacity| 500mAh
Bluetooth Effective Distance| 10m
Product Weight| 35g
Charging Voltage| DC 5V

PRODUCT DETAILS

Please charge the earbuds and the charging case for at least 15 minutes
before first use

LISTENING COMFORT

Select the right size of ear-tip
Choose the ear-tip with the most comfortable fit and best seal. To change an ear-tip, gently pull it off from the earbud and press on the new one. Wearing the Earbuds
Gently insert the earbuds into the ear and adjust to a comfortable position by rotating them. R is for the right ear and L for the left.

BATTERY LIFE AND CHARGING

Battery life
In Bluetooth mode the buds can last for 5 hours of continuous play. Using the charging case, this can be extended to 30 hours.
Charging the earbuds
Place the earbuds in the charging case then close the charging case,they will automatically shut down and begin charging.
Charging the charging case

PLAYBACK CONTROLS

AUTOMATIC CONNECTION

Pairing:

1. Turn on the Bluetooth of your mobile phone
2. Open the charging case, they will automatically turn on and enter the pairing state.
3. Turn on the pairing function on the device to be paired with the earbuds
4. From the list of available devices Find and select “AUKEY RP-M1 Pro” from the list of available devices.
5. If a code or PIN code is required for pairing, please enter “0000”

Automatic remote connection

1. When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found.
2. Forced pairing, 5 tap on either side of the touch button, disconnect the current Bluetooth connection, re-enter the pairing mode, the blue light quickly flashes.
3. In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired.
4. Place the earbuds in the charging case then close the charging case,they will automatically shut down and begin charging.
5. If the Bluetooth connection is lost, they will automatically begin pairing.

NOTE:

• If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again.
• The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps.
  

SAFETY INSTRUCTIONS

1. Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform.
2. Use electronic equipment with caution during thunderstorms.
3. This product contains small parts which could cause harm if swallowed. Keep out of the reach of children.
4. Using the earbuds for a long time at high volume may affect your hearing. Make sure to use an appropriate level of volume.

BATTERY WARNING

This product contains a lithium battery. Please do not disassemble, strike, crush, or place the product into contact with flames. Do not expose to high temperatures or direct sunlight for a prolonged period. If there is any swelling, leakage, odor, or any other abnormality in the battery compartment of the product, cease use immediately. Please dispose of used batteries properly and in accordance with local regulations.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCE
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF EXPOSURE STATEMENT

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

• AUKEY Official | Unlock More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>