PYLE PBMSPRG3 Wireless Portable Bluetooth Boombox Speaker User Manual

PyleUSA.com
PBMSPRG3 Wireless Portable Bluetooth Boombox Speaker
User Manual

PBMSPRG3
Wireless BT Portable Speaker Radio System

PBMSPRG3 Wireless Portable Bluetooth Boombox Speaker

Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won’t declare again, and we are not responsible for consequence caused by fault or oversight of this manual.

FEATURES:

• Compact Boom Box Stereo Style
• Portable Travel-Friendly Speaker Design
• Digital Streaming FM Radio
• Built-in Rechargeable Battery
• MP3 Digital Audio File Playback
• Ported Enclosure for Extended Bass
• Full Range Stereo Sound Reproduction
• Rugged & Durable ‘Super Tube’ Speaker Housing

INSTRUNCTION:

1. ON/OFF button
2. Micro SD Slot
3. Charging jack
4. Previous/Volume down
5. Next/Volume up
6. USB port
7. Aux-in jack
8. Mode (Wireless BT switch, USB disk, Micro SD, FM and AUX-IN state)
9. Play/Pause

Wireless BT Streaming:

1. Turn the power button to “ON”. The LED light turns blue and blinks quickly, then enter Wireless BT mode and you will hear a “Bluetooth Device Ready To Pair” tone.
2. Activate Wireless BT of your mobile phone and search for the device name “Pyle USA” then connect it. The blue LED light blinks slowly and will beep three times once connected.
3. Play the music from your mobile phone and enjoy.
4. Press Previous or Next button on the device or on Mobile phones to select songs you like.
5. Press Play/Pause button on the device or on Mobile phones to play/pause the music.
6. Use the Wireless BT device to adjust volume up and down or press and hold the Previous or Next button to adjust volume down and up.

Playing music from USB disk & Micro SD card:

1. Turn the Power button to “ON”.
2. Insert USB flash disk or Micro SD card into slot, the music stored will be played automatically and blue LED will be lit.
3. Under playing mode, short press Previous or Next button to select songs you like, or press and hold the Previous or Next button to adjust volume down and up.
4. PLAY/PAUSE to play or pause music.
5. Please turn the Power button to “OFF” if you will not use it.

Remark: Under Wireless BT playing mode, insert Micro SD or USB will disconnect the Wireless BT and switch to play the USB or Micro SD card. You can press the MODE button to switch to Wireless BT mode again.
How to Use FM Radio:

1. Under FM radio state, the audio cable provided is the antenna. Please insert the audio cable to get the best FM signal before using.
2. Turn the power button to “ON”, press the “MODE” button, the speaker will prompt “The Radio Mode” when entering FM state.
3. Under playing mode, short press “Play/Pause” button to auto search the FM Channel and store it automatically.
4. Press Previous or Next button to change the stored FM channel.

AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device. Then press the “MODE” button, the speaker will prompt “Aux Input Mode”, then Enjoy.. When using an external device, all functions can be controlled by the external device.

TWS Function:

1. Turn ON two identical speakers you want to pair, please be noted that they must have the same BT paring name, both under BT mode. You only need to set up one of the two units;
2. Press and hold “Mode” button then the speaker will make a tone “di” to start pairing, and will make “di” voice for 3 times once successfully paired;
3. Connect Wireless BT with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect.
4. If you want to exit the TWS mode, press and hold “Mode” button (of the unit that you set at beginning) again to exit the TWS function.

Remark: Under the TWS mode, if you connect your mobile phone to the unit (you set at beginning) via the provided audio cable, it will start to play AUX via TWS function, under this status, you can not switch to Wireless BT mode by pressing the Mode button.
Colorful LED display and off:
This unit will display colorful pulsating bright lights when the music is ON. To turn off the light, please push the Play/Pause button for 5 seconds.

Battery Charging:

1. Power OFF the unit, put the provided charger cable into the charging slot of the unit, connect the other end to your PC or other charger with 5V output, the red charging indicator light will be lit.
2. Charging time should be 3 hours. When fully charged, the indicator light will switch off.
3. In order to prolong the battery life, please do not charge more than 8 hours.

Note:

1. The unit will operate without the wire connection using the lithium battery. The amount of battery life depends on how hard the unit is working. Heavy, loud, bass music will use more energy to produce than spoken word.
2. The built-in rechargeable battery is not replaceable. Do not remove or replace it, do not throw it in the trash or in the fire.
3. When cleaning the product, use a soft dry cloth. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

WARNING
This product can expose you to a chemical or group of chemicals, which may include ”Cadmium (Cd)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

PyleUSA.com VISIT Us ONLINE:
Have a question?
Need service or repair?
Want to leave a comment?
PyleUSA.com.ContactUs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>