infobit iTrans E150U2 18Gbps HDBaseT Extender User Manual
- October 27, 2023
- infobit
Table of Contents
infobit iTrans E150U2 18Gbps HDBaseT Extender
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of
surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Introduction
This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control
signal and USB KVM signal to a distance up to 150m via a single CAT6 cable.
This product converts HDMI signal to standard HDBaseT signal and transmits it
through LAN cable. It can easily control signal source device or display
device from the remote end through a bi-directional IR signal pass-through
function. Video resolution up to 4K2K@60Hz YUV 4:4:4. It also supports USB 2.0
transmission and POC function.
The extender can be widely used in other fields such as video conference
system, multimedia signal broadcasting, HDMI signal extension, etc.
Features
- HDMI 2.0b and HDCP 2.2 compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz YUV 4:4:4
- The transmission distance can be extended up to 492ft / 150m at the resolution of 1080P@60Hz, or 394ft / 120m at 4K2K@60Hz 4:4:4 via a single CAT6 cable
- Support bi-directional IR signal and USB KVM signal pass-through
- Support bi-directional POC (Power over Cable) function
- Support USB 2.0 transmission
- EDID management
- Compact design for easy and flexible installation
3. Package Contents
- 1 x 18Gbps HDBaseT Extender (Transmitter)
- 1 x 18Gbps HDBaseT Extender (Receiver)
- 1 x IR Blaster cable (1.5 meters)
- 1 x IR Wideband Receiver cable (1.5 meters)
- 4 x Mounting Ears
- 8 x Machine Screws (KM3*4)
- 1 x 24V/1A Locking Power Supply
- 1x User Manual
Specifications
Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz YUV 4:4:4
USB Compliance| USB 2.0
IR Level| 5Vp-p
IR Frequency| Wideband 20K-60KHz
Transmission Distance| 1080P@60–150m, 4K60 –120m
Color Space| RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
| 8-bit, 10-bit, 12-bit (1080P) 8-bit (4K60)
8-bit, 10-bit, 12-bit (4K24/30)
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format| LPCM 7.1CH, Dolby True HD and DTS-HD Master
ESD Protection| Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Transmitter
| Input: 1×HDMI IN [TypeA, 19-pin female] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack] 1×USB [USB-B, 4-pin female]
Output: 1×HDBT OUT [RJ45]
1×IR OUT [3.5mm Stereo Mini-jack]
Receiver
| Input: 1×HDBT IN [RJ45 with light] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack]
Output: 1×HDMI OUT [TypeA, 19-pin female] 1×IR OUT [3.5mm Stereo Mini-jack] 2×USB 2.0 [USB-A, 4-pin female]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H)
Weight| Transmitter: 245g, Receiver: 249g
Power Supply| DC 24V/1A;
Support bi-directional POC function
Power Consumption| 13.2W (Max.)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | The red LED is on when the Transmitter is powered on. |
2
| EDID DIP
switch
| Used for audio EDID setting (dial to COPY by default). COPY: Copy the EDID
of the HDMI OUT port of Receiver. STD: Default 1080P 2CH
3| SERVICE| Firmware update port.
4
| ****
DC 24V
| DC 24V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 24V/1A power supply, the other doesn’t need power supply.
5| HDBT OUT| HDBT output port, connecting to the HDBT IN port of the Receiver with CAT6 cable.
6
| ****
Link Signal Indicator (Green)
| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
7
| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
8| HDMI IN| HDMI signal input port, connecting to HDMI source device
such as DVD play or Set Top Box.
| No. | Name | Function Description |
|---|---|---|
| 9 | IR IN | Connecting to IR receiver cable, the IR receive signal will emit to |
the IR OUT port of the Receiver.
10| IR OUT| Connecting to IR blaster cable, the IR emit a signal is from the
IR IN port of the Receiver.
11| PC| USB-B port, connecting to PC.
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The power LED is on when the Receiver is powered on. |
| 2 | SERVICE | Firmware update port. |
3
| ****
DC 24V
| DC 24V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 24V/1A power supply, the other doesn’t need power supply.
4| HDBT IN| HDBT input port, connecting to the HDBT OUT port of the Transmitter with CAT6 cable.
5
| ****
Link Signal Indicator (Green)
| ▪ Illuminating: The transmitter and Receiver are in good connection status.
▪ Flashing: The transmitter and Receiver are in poor connection
status.
▪ Dark: The transmitter and Receiver are not connected.
| No. | Name | Function Description |
|---|
6
| Data Signal Indicator (Yellow)| ▪ Illuminate HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7| HDMI OUT| HDMI signal output port, connecting to HDMI display devices such
as TV or monitor.
8| IR IN| Connect to the IR receiver cable. The IR signal will send to the IR
OUT port of the Transmitter.
9| IR OUT| Connect to the IR blaster cable, the IR signal is from IR
IN port of the Transmitter.
10
| USB 2.0
ports
| Two USB-A ports, connecting to USB 2.0 devices. (The maximum output current of a single USB 2.0 port is 500mA, exceeding which it will not work.)
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
Application Example
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.