infobit iCam XE2 PTZ Camera

Packing List

1. OHD Camera*1
2. Speakerphone*1
3. Hub*1
4. A Expansion microphone*
5. Remote Control*1
6. 5m DP Cable2 Manual1
7. 83m USB Cable*1
8. Power Adaptor* I
9. Wall Mount B
10. racket*1 I
11. 3.5mm Audio Cable *

Product Overview

HD Camera

1. Lens
2. Pan&Tilt
3. Power
4. Standby
5. HDMI
6. DP
7. RS485
8. RS232

Speakerphone

1. Status indicator
2. Speaker
3. Function Keys
4. Location indicator
5. DP 6 3.5mm Jack 7
6. Location indicator
7. Bluetooth Power

1. Microphone status indicator
2. Location indicator
3. Mute/Unmute
4. 3.5mm Jack

Hub

1. Power 2 DP1
2. I DP 2
3. Type-C
4. DP indicator 1
5. DP indicator 2
6. Power

Connection Description

1. Connect camera and Hub with original DP cable
2. Connect the speakerphone and hub with original DP cabl (Optional, Connect the extension microphones to the main speakerphone by 3.5mm jack cable)
3. Connect the computer to the Hub with the original USB cable
4. Connect with the original power adapter and power supply
5. After confirming that all connections are correct, open the conference software on the PC and select the corresponding camera, microphone and speaker to start the video conference.

Key Description of Remote Control

Attentions for Remote Control

1.  Please check whether the indicator corresponding to the camera selection area is on or not.
2. If the remote control doesn’t work, please replace batteries.
3. Make sure the number keys on the camera selection area are consistent with the remote control address in the menu.

Common Operation Instructions

Camera Select
Refer to the dial-uo at the bottom of the camera and choose camera address number that you want to control (1-4).

Camera Direction Control

Turning up
Turning down
Turning left
Turning right
Turnina to default

Note: Press the direction key when you need to adjust the angle. If you want to move the camera slowly, just click the direction key; If you want to move the camera fast at a large scale, just long-press the button.

Camera Focusin[ Mode Control

• [AUTO FOCUS ]
• Switch the focus mode to AUTO
• [ MANUAL FOCUS I Switch the focus mode to MANUAL
• [FAR Far focus manually [NEAR ] Near focus manually

Camera Zoom Control
Press any one of the 4 [ZOOM] to make the zoom functioning. These 4 keys are not applicable for fixed focus cameras.

Preset Setup, Call, Cancel

1. Reserve Preset: Press [PRESET ), then press one of the numbers (0-9) to reserve a preset that corresponds to the NUMBER. Note: You can setup 10 presets at most by the remote control.
2. Call Preset: Press the NUMBER (0-9) directly to call the reserved preset. Note: It won’t work if there’s no preset reserved in the corresponding number.
3. Remove Preset: Press [RESET ), then press one of the number (0-9) to remove a preset that corresponds to the NUMBER.

Speakerphone Volume +/-/ Mute

Volume Down
Volume Up Microphone
Mute/ Unmute

Description of Control Interface

RS-232 Interface Distribution

1. N.C.
2. N.C.
3. TXD
4. GND
5. RXD
6. N.C.
7. N.C.
8. N.C.

RS-485 Interface Distribution

Menu Setup of HD Camera

When operating remote control, press [MENU] to enter main menu of the video camera.

Level 1 Menu- Main Menu

Language: Support Chinese/English Click the Home button on the Remote to enter level 2 sub-menu Click the Menu button on the Remote to exit menu

Level 2, Menu- Exposure

Mode: Auto/Manual Backlight: On/Off the backlight ExpComp: Exposure compensation, optional item is 0 to 15 Flicker: Support 50Hz/60Hz When changing the exposure mode to Manual, the sub-menu is as follows :

Iris:Off/F1.6/F1.85/F2.0/F2.2/F2.63/F3.0/F3.4/F4.0/F6.0/F8.0/ F10.0/F16.0/F32.0 Shutter: Between 1/10000 and 1/25 Gain, exposure gain setting, optional item is 0 to 99 Flicker: Support 50Hz/60Hz

Level 2 Menu-Color

• Brightness: Set image brightness dyamically. Default 50, option item 0-99
• Contrast: Set image contrast dynamically. Default 50,option item 0-99
• Hue: Set the relateive brightness of the image. Default 50,option item 0-99
• Saturation: Set image color effect. Default 50,option item 0-99
• WB mode : Auto/Manual/VAR When the WB mode is Auto, the Rtuning and Btuning value can be tuning, the range is 0 to 99; When the WB mode is Manual, the sub menu will be as follows,
• When the WB mode is VAR, the sub menu will be />-^8CC8M>:
• The range for the color temp can be adjusted between 2500K to 9000k;

Level 2 Menu Image

• Flip: Enable/disable the picture up/down flip
• Mirror: Enable/disable the picture left/right flip Video
• Format: 4KP30/4P25/1080P60/1080P50/1080P30/1080P25/ 720P60/720P50/720P30/720P25
• USB Mode: ISOC/BULK USB
• mode: Adjust between Isochronous transfers mode and Bulk transfers mode Style
• Mode: Normal, PC, Bright

Level 2 Menu P/T/Z

Acc Curve: Slow/Middle/Fast L/R SET:
On/Off When On, the remote control press left, the PTZ camera moves to the left, the remote control press right, the PTZ camera moves to the right When Off, the remote control press left, and the PTZ camera moves to the right, the remote control press right, and the PTZ camera moves to the left

Level 2 Menu Communication

• Protocol:Auto/Visca/Pelco-D/ Pelco-P
• Baudrate :9600/38400/2400/4800 RC
• Address:All/1/2/3/4

Level 2 Menu-Information

Model: 4K camera PTZ version: 1.0.2.8 SOC Version 1.1.24
Note: The version number here is just an example, the actual parameters shall prevail.

Instructions for Speakerphone

Button Function

Expansion Microphone Button Function

LED Indicator Function

Note: When adjusting the volume, the blue light of the volume status indicator will change with the volume. When the volume increase key is pressed, the blue light progress bar of the volume status indicator will increase; When the volume down key is pressed, the blue progress bar of the volume status indicator is reduced. When the volume is adjusted to off, the indicator is red. After adjusting the volume, the green light will return at intervals of 2s.

Technical Specification

Conference Camera

Optical Zoom 12x zoom| 12x zoom
Image Sensor| 1/2.8″ SONY CMOS
Effective Pixels| 8.29MP
Lens| f=3.9mm-46.8mm
Aperture| F1.6-2.8
Video Format| 4K30,1080P-60/50/30/25, 720P-60/50/30/25
H.264, H.265, MJPG, YUY2, NV12
Horizontal Angle| 70.82°(W)- 6.48°(T)
Focus| Auto / Manual
Digital Noise Reduction| 2D & 3D Noise Reduction
Exposure| Auto / Manual
Video Interfaces| HDMI, DP
Video Compression Format| H.264, H.265, MJPG, YUY2
Control Protocol| VISCA/Pelco-D/Pelco-P
Baud Rate| 9600/4800/38400/2400
Pan/Tilt Rotation| ±175°,-90° +90°
Pan Control Speed| 0.1 -80°/sec
Tilt Control Speed| 0.1-60°/sec
Preset Number| 255 presets by Pelco-D,32 presets by Pelco-P, 7 presets by Visca (10 presets by remote controller)
Speakerphone
Acoustic echo cancellation(AEC):| >65dB
Speaker Power| 4 5W
Speaker Volume| 120dB
Response| 100Hz-20Hz
Pickup Range| 6m(Radius)
Microphone Sensitivity| -38dBFS
SNR(Signal to Noise Ratio)| 62dB
Interface| DP interface:2×3.5mm Jack（for Expansion Mics)
Hub
Interface| DP2; Power interface1; USB Type-C1
Power Supply| DC 12V
USB Cable| 3m USB cable1
Connection Cable| 5m DP cable*2
General Parameter

Operation Systems

| Windows 7 or higher; Android, Mac OS™ 10.10 or higher, Linux (Required to support UVC.) Compatible with Zoom, MS Teams, Skype and etc.
Input Voltage| DC 12V
Input Current| 2.0A(Max.)
Store Temperature| -10°C~+60°C
Store Humidity| 20%~ 90%
Working Temperature| -10°C~+50°C
Working Humidity| 20%~ 80%
Dimension (WHD)| Camera: 171.6192.6171.6mm; Speakerphone:143mm143mm75mm; Extension microphon:73.77420mm ;Hub: 989820mm

United Kingdom INFOBIT AV LTD. [email protected] Fifth Floor 3 Gower Street London WC1E 6HA Singapore
INFOBIT AV PTE. LTD. +65 9711 9648 [email protected] 3 Shenton Way, Shenton House

09-02, Singapore 068805 China

INFOBIT AV LTD. [email protected] Chaoyang, Beijing China www.infobitav.com [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>