infobit DX-R-22 Converter in Regard Moscow User Guide
- October 30, 2023
- infobit
Table of Contents
infobit DX-R-22 Converter in Regard Moscow
Product Information
The iTrans DX-R-22 is an audio signal adapter designed for use in the audio system field. It is used to convert analog audio signals to Dante audio signals and vice versa. The product is powered by Ethernet (PoE) switch.
Product Features
-
Function Introduction: Convert the received Dante network audio signal to analog audio signal.
-
Input & Output: Supports two analog audio signal outputs
and two Dante inputs. -
Hardware Interface Type: Two XLR are used to output analog audio signals; One RJ45 port is used to input Dante network audio signal.
-
Technical Parameters:
- Model No.: iTrans DX-R-22
- Product Type: Audio signal adapter
- Function: Convert Dante audio signal to analog audio signal output
- 3 pin XLR F/M: 2
- RJ45 Port: 1
- Analog Audio Interface: XLR
- Dante: RJ45
- Frequency response: 20Hz to 20kHz (-/+0.5dB)
- Maximum signal level (balanced): +18dBu / +4dBu / 0dBu
- Dynamic range: > 100dB
- SNR (Signal to Noise Ratio): > 100dB
- THD (Total Harmonic Distortion): < 0.01%+4dBu
- Power consumption:
- Operating temperature:
- Size (LxWxH):
- Weight:
Product Usage Instructions
To use the iTrans DX-R-22, follow these steps:
- Connect the Ethernet (PoE) switch to power the product.
- Connect the analog audio source to the XLR output ports on the product.
- Connect the Dante network audio source to the RJ45 input port on the product.
- The product will convert the Dante network audio signal to analog audio signal output, which can then be used to connect to an amplifier or other audio equipment.
Product Introduction
This product is applied to the audio system field to convert the analog audio signal to Dante audio signal. Power supply Ethernet (PoE) switch.
Product Feature
- Function Introduction: Convert the received Dante network audio signal to analog audio signal.
- Input & Output : Support two analog audio signal outputs, two Dante inputs.
- Hardware interface type: Two XLR are used to output analog audio signals; One RJ45 port is used to input Dante network audio signal.
Technical Parameters
| Model No. | iTrans DX-R-22 |
|---|---|
| Product Type | Audio signal adapter |
| Function | Convert Dante audio signal to analog audio signal output |
| 3 pin XLR F/M | 2 |
| RJ45 Port | 1 |
| Analog audio interface | XLR |
| Dante | RJ45 |
| Frequency response | 20Hz to 20kHz (-/+0.5dB) |
| Maximum signal level (balanced) | +18dBu / +4dBu / 0dBu |
| Dynamic range | > 100dB |
| SNR (Signal to Noise Ratio) | > 100dB |
| THD (Total Harmonic Distortion) | < 0.01%（+4dBu） |
| Power consumption | <1W |
| Operating temperature | 0-40℃ |
| Size (LxWxH) | 652mm x 32mm x 22mm |
| Weight | 0.2kg |
Product Overview
Product Connect
- Download and install the Dante Controller from Audinate website (www.audinate.com ).
- Connect the device to the switch using Dante network audio system with network cable.
- The analog audio transmission device is connected through the XLR interface.
- Search for devices in Dante Controller software, Select and open the devices to be configured. On the Routing page, match the input row with the output column with a custom check.
- Once set up and configured the audio routing between audio device, the audio device will remember and save the settings.
- Do not spill any corrosive chemicals or liquids on or near the equipment.
Packing List
| DX-R-22 | Quick Guide |
|---|---|
| 1Set | 1Pcs |
Notes:
In order to ensure the reliable use of equipment and the safety of personnel,
please follow below details when installing, using and maintaining:
- When the equipment is installed, ensure that the ground wire in the power line is well grounded and the connection point of the chassis is well grounded.
- Keep the working environment well ventilated, so that the heat generated by the equipment can be discharged in time, so as not to damage the equipment due to high temperature.
- If the equipment is not used for a long time or in a wet condensation environment, the main power supply should be turned off.
- Be sure to unplug the ac power cord of the equipment from the power supply socket before the following operations:
- Remove or reload any part of the equipment.
- Disconnect or reconnect any electrical plug or connection to the device.
- Non-professionals without permission, do not dismantle the equipment without authorization, so as to avoid the risk of electric shock. Do not repair, so as not to increase the damage of the equipment.
Contact US
www.infobitav.com
info@infobitav.com
References
- Audinate - Maker of Dante, Pro AV's Leading Networking Technology
- Audinate - Maker of Dante, Pro AV's Leading Networking Technology
- infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions
- infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>