infobit P30B 30W Pendant Speaker User Manual

infobit P30B 30W Pendant Speaker

Product Information

Specifications

Model| Description| IP Rate| 70V Power Taps| 100V Power Taps| 8 Speaker Frequency Response| SPL (@1W/m)| Dimension| Material| Color| Weight
---|---|---|---|---|---|---|---|---|---|---
speaker P30B| Pendant Speaker 30W, Black| –| –| –| –| –| –| –| –| –

Description

The speaker P30B is a pendant speaker with a power rating of 30W in black color. It is designed for indoor use and provides high-quality audio output.

Features

• Easy pendant mounting design
• 30W power output for clear sound
• Durable construction for long-term use
• Compatible with 70V and 100V power systems

Product Usage Instructions

Safety Precautions

Before operating the iSpeaker P30B, please read the safety precautions provided in the user manual to prevent any bodily injury or property damage.

Installation Speaker Placement

When installing the speaker, ensure it is placed securely to avoid any potential damages or injuries. Use proper screws, bolts, or anchors for installation.

Pendant Mounting

1. Attach the carabiner through the eye bolt on the back of the speaker.
2. Securely install the speaker ensuring it is properly attached to the ceiling or building’s structure.

Connecting the Speaker to Your System

1. Connect the speaker wire connected to the first (+) and (-) inputs on the speaker’s 4-pin Euroblock to the output on the amplifier.
2. Ensure proper polarity connections between the speaker and the amplifier.
3. Avoid any stray strands touching each other to prevent short circuits that could damage the amplifier.
4. Turn on your amplifier and test the system with your favorite music.

Frequently Asked Questions

Q: Can I install the iSpeaker P30B outdoors?

A: Although the speaker is designed to withstand the elements, it is recommended to take precautions to optimize its long-term performance. It is primarily intended for indoor use.

Q: Is installation hardware included with the iSpeaker P30B?

A: The packaging includes installation hardware such as screws, bolts, and hanging cables for installing the pendant speaker.

Caution: Please read this manual carefully before operating. Damage caused by misuse is not covered by the warranty.

SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully before use. The included conventions of safety symbols and messages are regarded as essential precautions.
• We recommend that you keep this instruction manual handy for future reference.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

• Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage that could result from mishandling.
• Before operating this product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety risks.
• Indicates a potentially hazardous situation that, if mishandled, could result in death or serious personal injury.
• Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.
• WARNING! IMPORTANT SAFETY INSTRUCTIONS
• THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
• THE PROVIDED INSTALLATION HARDWARE MUST BE USED TO INSTALL THIS PRODUCT. SPEAKERS MUST BE ATTACHED BY A SAFETY CABLE!
• INFOBIT is not responsible for the structural integrity of the installation. Please ensure that a qualified technician installs this product and that the building’s engineer or architect has approved the equipment and installation.
• To prevent injury, this apparatus must be securely attached under the installation instructions.
• DO NOT install electricity, smoke, steam, or any heat source such as stoves, radiators, heat registers, amplifiers, or other apparatuses producing heat.
• DO NOT place any naked flame sources, such as candles, close to the product.
• USE hardware and accessories as indicated by the manufacturer.
• REFER all servicing to qualified service personnel. Servicing is required when the speaker is damaged in any way, does not operate normally, or has been dropped.
• No user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Changes or modifications not expressly approved by the manufacturer could void the user’s warranty.

CAUTION!

• Although the speaker is designed to withstand the elements, you should take precautions to optimize their long-term performance.
• Keep soil and wood chips from covering the speaker grill. If soil or dust accumulates on the grill, it can be rinsed away with low water pressure.
• Chemicals commonly used outdoors can damage the speaker’s rubber elements. Avoid spraying such chemicals onto or near the speaker.
• Avoid placing the speakers where the grill area will come in direct contact with sprinklers or other water sources.

DESCRIPTION

• Designed to meet the needs of open-ceiling applications, the speaker P30B 5.25” indoor pendant speaker is fire-resistant, high-powered, and easy to install.
• The P30B uses an acoustically matched 5.25” to maximize performance while minimizing the overall footprint of the speaker. With the addition of a 70/ 100V transformer, the P30B can be easily integrated into any distributed commercial audio system.
• It is perfect for restaurants, retail stores, offices, warehouses, meeting rooms, auditoriums, gymnasiums, sports bars, pubs, coffee shops, or any open-architecture or high-ceiling environment requiring paging and background music.

FEATURES

• Compliant with the EN54-24 standards.
• Indoor-outdoor commercial music & paging speaker with 70V and 100V transformers.
• IP44 for indoor pendant speaker with safety hanging wire.
• UV-fire-resistant ABS cabinet for durable use.
• 5.25” full-range PP woofer speaker system.
• 70 Volt/100 Volt transformer with 8 Ohm bypass
• 70V power taps 30W, 15W, 7.5W, 3.8W and 1.9W.
• 100V power taps 30W, 15W, 7.5W, 3.8W.
• 8Ω power 30W only.
• Pendant wall speaker of special dispersion loudspeakers.
• Fireproof Phoenix connector, 95℃ fire-resistant cable, and thermal fuse.
• Indoor Applications: Restaurants, Offices, Meeting Rooms, Auditoriums, Gymnasiums, Sports Bars, Pubs, Coffee Shops, retail stores, and shopping malls.
• Easy and secure installation with included pendant mounting hardware
• Euroblock screw terminal connector
• Available in black color

Specifications

INSTALLATION

SPEAKER PLACEMENT

• If you want music to cover a wide area, it’s best to have a larger number of speakers playing at low volume rather than a few at high volume. Keep this in mind when designing your pendant system.
• Place the speakers as close as possible to the primary listening area. The perceived volume of the speaker rapidly decreases as it is moved further from the listener.

PENDANT MOUNTING

PLEASE NOTE: Before beginning installation, be sure to take precise measurements.

1. Determine the locations for the speaker(s).
2. Ensure you have enough speaker wire to reach from the amplifier to the 1st speaker and then to each additional speaker.
3. Unpack the speaker unit and mounting hardware.
4. Measure the length of cable you will need for the desired mounting height.
5. Thread the bare end of the cable through the Fastlink.
6. Secure the cable to or around the structure the speaker will hang from.
7. Thread the cable back through the Fastlink and pull to tighten.
   • IMPORTANT: Once the tension is pulled through the Fastlink, it cannot be loosened.
8. Attach the carabiner through the eye end of the cable.
9. Run the speaker wire through the oval-shaped hole in the top cover plate.
10. Connect the speaker wire to the first (+) and (-) inputs on the 4-pin Euroblock. Use the second (+) and (-) for daisy-chaining to your next speaker in 70V applications.
11. Select the desired tap setting.
12. Place the cover plate on top of the speaker unit and screw in the eye bolt until it is fully tightened and the cover plate is secure.
13. Attach the carabiner through the eye bolt on the back of the speaker.
14. Your speaker should now be securely installed.

• Make sure the speaker is properly secured to the ceiling/ building’s structure.
• Please use the proper screws, bolts, or anchors (not included).
• Failure to do so may cause the speaker to become unsecured & cause potential damages/ injuries.

PACKING LIST

CONNECTING THE SPEAKER TO YOUR SYSTEM

1. Connect the speaker wire connected to the first (+) and (-) inputs on the speaker’s 4-pin Euroblock to the output on the amplifier. Ensure the (+) from the speaker is connected to the (+) on the amplifier and the (-) on the speaker connects to the (-) on the amplifier (see Figure 1).
2. Turn your amplifier on and test the system with your favorite music.

PLEASE NOTE: Ensure no stray (+) and (-) strands touch each other. Touching strands can cause a short circuit that could damage the amplifier .

INSTALLATION DIAGRAM

PLEASE NOTE: Be careful not to cross wires when installing your speakers. Wiring should always be negative to negative and positive to positive (Figure 2. shows speaker c. incorrectly wired).

VOLUME CONTROL INSTALLATION DIAGRAM

SWITCH SETUP

The iSpeaker P30B supports both high voltage and low Impedance (8ohm) power. It is necessary to configure the Speaker Impedance Switch as well as wire up the speakers according to the specific speakers you are using.

Switching examples for each of the available configurations are as follows :

1. Switch to 3.8W, 7.5W, 15W, or 30W positions when connected to 100V power. (Follow the black label)
2. Switch to 1.9W, 3.8W, 7.5W, 15W or 30W positions when connect to 70V power. (Follow the white label)
3. Switch to 30W position when connected to 8Ω low impedance power. (Follow the blue label) *Note: Do not switch to this 8Ω 30W position when connecting 70V/100V high voltage power, otherwise the speaker may be damaged!

SERVICE

• In the event of a malfunction, ensure the problem is not related to operator error or system devices external to this unit.
• Once it is certain that the problem is related to the product, contact your warranty provider as described in the warranty section of this manual.

LIMITED WARRANTY

• INFOBIT CO., LTD. (“INFOBIT”) warrants this product to the original purchaser to be free from defects in materials and workmanship (subject to the terms set forth below), for the following periods from the date of purchase.

• THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP FOR THE FOLLOWING PERIOD speaker P30B: 2 Years
  INFOBIT will repair or replace (at INFOBIT’s option) this product or any defective parts (excluding electronics and amplifiers) in this product.

• Your authorized INFOBIT dealer will inspect the product and, if your dealer is not equipped to perform the repair of your INFOBIT product, they will replace your product or return it to INFOBIT for repair, at their discretion.

• Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service.

• This warranty is invalid if the factory-applied serial number has been altered or removed from this product.

• This warranty is invalid if this product was not purchased from an INFOBIT-authorized dealer. Cosmetic damage or damage due to the accident, acts of God, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product are not covered in this warranty. This warranty does not cover damage due to improper operation, maintenance, installation, or attempted repair by anyone other than INFOBIT or an INFOBIT dealer that is authorized to do INFOBIT warranty work.

• Any unauthorized repairs will void this warranty.

• This warranty does not cover products sold as is.

• REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER/PURCHASER.

• INFOBIT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.

• EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND INSTEAD OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

• INFOBIT AV

• www.infobitav.com

• [email protected]

Documents / Resources

| infobit P30B 30W Pendant Speaker [pdf] User Manual
P30B, P30B 30W Pendant Speaker, 30W Pendant Speaker, Pendant Speaker, Speaker
---|---

References

• infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>