infobit iCam 50 4K UHD USB Camera User Guide
- June 5, 2024
- infobit
Table of Contents
infobit iCam 50 4K UHD USB Camera
Product Appearance
Packing List
| Name | Quantity |
|---|---|
| Camera | 1 |
| Remote Control | 1 |
| USB Cable | 1 |
| Quick Start | 1 |
| Quality Card | 1 |
Product Features
Ultra HD Super Large Field of View
A new generation of UHD CMOS image sensor, with more accurate native
resolution, richer color information, and shooting 4K video with high-
definition details. With a 110-degree ultra-large viewing angle and low-
distortion 4K lens, the panoramic field of view can be seen.
USB 3.0
Support USB 3.0 interface, power supply, video, audio in one, can support 2
USB video signal sources (optional) + 1 audio source at the same time.
Built-in Microphone Array
Built-in beamforming microphone array, unique noise suppression algorithm and
automatic gain algorithm, the pickup distance is up to 6 meters, so that your
voice is perfectly presented.
AI Ability
Multi-layer convolutional neural network design, cutting-edge deep learning
algorithm, make the camera with intelligent characteristics, high-quality
analysis data can be obtained through open API.
Auto Framing
Using advanced deep learning algorithms, it automatically adjusts the viewing
angle of the screen according to the people in the detection field of view,
eliminating the need for manual adjustment of camera operations, and bringing
you a brand-new intelligent experience.
AI Humanoid Tracking
Built-in NNE hardware unit, using deep learning technology, by extracting
target features, it can achieve smooth human shape tracking no matter where
the face is facing, which is suitable for application scenarios such as
speaker automatic tracking.
Convenient Operation
Through the infrared remote control, exclusive software, one-button start
automatic frame selection, humanoid tracking, and at the same time you can set
preset positions, ePTZ, image parameters, etc.
Camera Installation
When the monitor thickness is less than or equal to 45mm, the mounting method can be selected to mount the conference camera product on the monitor. The specific installation is shown in the following figure:
Installation Dimension
Remote Control
| No. | Name | Function Description |
|---|---|---|
| 1 | Standby Key | Turn on/off or wake up the device. |
| 2 | Direction Key | Adjust the menu cursor and menu parameters. |
| 3 | Return Key | Return to the upper level of the menu. |
| 4 | Menu Key | Open the menu or exit the menu. |
5
| No. 1 Preset Key| No. 1 preset position, long press for 3 seconds to set the preset position, short press to adjust the preset position.
6
| No. 2 Preset Key| No. 2 preset position, long press for 3 seconds to set the preset position, short press to adjust
the preset position.
7
| ****
TRACKING
ON Key
| Tracking on key, you need to click the SWITCH button first and then click the “ON button” to turn on the tracking function or automatic frame
selection function.
| No. | Name | Function Description |
|---|
8
| ****
TRACKING
OFF Key
| Tracking off key, when the tracking function or automatic frame selection function is turned on, directly click the “OFF button” to turn off the tracking function or automatic frame selection
function.
9
| ****
Mute Key
| Turn the microphone on or off. When the
microphone is turned off, there is a mute icon on the video.
10
| ****
HOME Key
| When the menu is not turned on, click the “HOME button” to restore to the state of the maximum angle of view without calling zoom. When the menu is opened, click the “HOME
button” to confirm menu and enter submenu.
11
| ****
ZOOM + Key
| Digital Zoom In (zoom in or zoom out is not
supported when the tracking function or the automatic frame selection function is turned on).
12
| ****
ZOOM – Key
| Digital Zoom Out (zoom in or zoom out is not supported when the tracking function or the automatic frame selection function is turned on).
13
| ****
SWITCH Key
| Click the first “SWITCH Key”, the image display is currently the tracking function (target tracking) or automatic frame selection function (auto framing). Click the second “SWITCH Key”
to switch the current function.
Maintenance and Troubleshooting
Camera Maintenance
- If the camera is not used for a long time, please disconnect the power after use.
- Use soft cloth or cotton paper to remove dust from the camera housing.
- When cleaning the camera lens, please use dry soft cloth to wipe, if dirt is serious, use neutral cleaner gently. Do not use strong or corrosive detergent, lest the lens scratch, affect the image effect.
Avoid Using
- The camera should avoid shooting particularly bright objects, such as sunlight, lights, etc.
- The camera should not work under unstable lighting conditions, otherwise the image will flash.
- Do not use around facilities that can transmit high-power radio waves, such as television station or radio-transmitting station.
Troubleshooting
Image have jitter after the camera is properly connected.
- Check whether the camera installed position be stabled.
- Check whether have vibrating machinery or object near the camera.
Toxic and Harmful Substances
| Part Name | Toxic or harmful substances or elements |
|---|---|
| (Pb) | (Hg) |
| Metal | x |
| Plastic | Ο |
| Glass | x |
| Circuit board | x |
| Power | x |
| Attached | x |
This form is compiled in accordance with SJ/T 11364.
Ο: Indicates that the content of the hazardous substance in all homogenized
materials of the component is subject to the limit specified in GB/T 26572.
x: Said the hazardous substance in at least one of the components homogenized
material content in excess of the GB/T 26572 limit requirements, and there are
no mature alternatives.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>