infobit M300 iSpeaker Real-Time Voice Optimization User Manual
- June 5, 2024
- infobit
Table of Contents
M300 iSpeaker Real-Time Voice Optimization
User Manual
Overview
| 1. Volume up button | 8. Bluetooth LED indicator |
|---|---|
| 2. Call button | 9. Bluetooth button |
| 3. Mute button | 10. Status indicator |
| 4. Multi-function button | 11. USB port for charging output (Type-A) |
| 5. Volume down button | 12. Audio output port |
| 6. Power button | 13. USB port for charging input (Type-C) |
| 7. Power LED indicator |
Warning
- Do not expose the product to the environment of dripping or splashing, and do not place liquid containers (for example, vases) on the product;
- Do not put the uncovered source of ignition (for example, lighted candles) on the product;
- Keep the product away from direct sunlight, open fire or other heat sources;
- If consumers use the power adapter for power supply, they should purchase the supporting power adapter that has obtained CCC certification and met the standard requirements.
Connection
a) Connect to the computer with a USB cable.
Warning: It is improper to connect the USB wire to a cellphone. Please
don’t try!
b) Connect to the computer or mobile equipment via Bluetooth pairing.
When the product is powered on for the first time, it will automatically enter
the Bluetooth pairing mode.
| Press once.| Press once.
---|---|---
| The blue indicator flashes.| The blue indicator flashes.
| The blue indicator is always on.| The blue indicator is always on.
- Every time the product is powered on, it is automatically connected to the equipment successfully connected last time (if available).
- To disconnect the Bluetooth connection, press the Bluetooth button again.
Powering on/off
Press and hold the power button for 2 s to turn on the power; the status
indicator will be on from top to bottom and then off.
Press and hold the power button for 2 s to turn off the power; the status
indicator will be on from bottom to top and then off.
Power indicator status
| The white indicator is always on| Turn on the power
---|---|---
| Off| Turn off the power
- After the product is connected to the computer, it is automatically powered on.
- After no operation within 30 min or no power supply, it is automatically powered off.
Button control
| Press or hold| Volume up/down
---|---|---
| Press| Answer/end calls
Press and hold for 2 s| Refuse calls
| Press| Turn the microphone off or on
| Press| Play/pause music
Lightbar indicator status
The white indicator is on for 2 s.| The USB has been connected to the
computer.
---|---
The green indicator flashes.| Calling
Some blue indicators are on.| Turn the volume up or down.
They turn red.| Mute
The green indicator is on.| Press the power button to check the battery level.
Charge
a) Charge the product
Power indicator status
| The red indicator is always on. | Undercharging |
|---|---|
| The white indicator is always on. | Fully charged |
| The red indicator flashes. | Low battery |
b) Charging external equipment
- During powering off or charging, the charging output will not be carried out.
- If the remaining battery is less than 10%, the charging output will not be carried out.
Audio output
Connect the external loudspeaker to the AUX jack of the product with an AUX cable (not provided). The audio will be played through the loudspeaker.
Product parameters
Specifications are subject to change without notice.
| Charging input | 5 V 2 A |
|---|---|
| Charging output | 5 V 2.1 A |
| Rated output power | 3W RMS |
| Battery capacity | 6500 mAh |
| Charging hour | 4 h |
| Call duration | 24 h |
| Drive unit size | 1×1.75″ (full range) |
| Frequency range | 20 Hz – 20 kHz |
| Bluetooth version | V5.0 |
| Bluetooth range | 10 m/33 ft |
| Specification range | 124 mm (length) x 124 mm (width)×31.6 mm (height) |
Model: speaker M300
INFO BIT AV PTE. LTD.
www.infobitav.com
info@infobitav.com
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>