MiBOXER S2-B 2.4G Rainbow Remote RGB+CCT Instruction Manual

Mi • Light
Subordinate New Brand

2.4G Rainbow Remote (RGB+CCT)
Model No.: S2-B / S2-W / S2-G

Product Features

This product adopt world-wide used 2.4GHz frequency, GFSK control method, with features of low power consumption, long-distance transmitting, strong anti- interference, and fast communication rate. It can control color, color temperature, saturation, and brightness of Mi-Light / MiBoxer 2.4G smart light.

Product Parameters

Model No.: S2-B / S2-W / S2-G
Working Voltage: 3V(AAA battery*2PCS)
Transmitting Power: 6dBm
Standby Power: 20uA
RF: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m

Button Diagram

Install Battery

*Note: 2AAA Battery need to buy seperately**

1. Open battery cover behind remote.
2. Install battery correctly and close battery cover.

Function Description

• Adjust RGB
  Short press key twice in succession, and then touch ****to adjust RGB.

• Adjust saturation
  Press key twice in succession, and then touch **to adjust color saturation of lighting. (Note: only in RGB mode)**

• Adjust color temperature
  Short press key once, then touch ****to adjust color temp.

• Adjust brightness
  Short press key once, then touch ****to adjust brightness.

• Dynamic mode switching
  Long press key until indicator light flashes twice, then short press key to cycle switch.
  (Note: it will exit automatically if no operation after 3 seconds)

Linking Code  Unlinking Code Instructions

You can control lights after linking remote with light.

Linking Code Instructions

Linking failed if light is not blinking slowly, Please follow above steps again. (Note: lights that have linked can’t link again)

Unlinking Code Instructions

Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: lights haven’t linked that don’t need to unlink)

Attention

1. If indicator light flashes quickly when using, please replace battery in time. Do not use poor quality battery in case of leaving out liquid to damage remote.
2. Do not use remote in a large-scale metal area or an area with strong electromagnetic waves nearby, otherwise will affect communication distance seriously .

Made in China

Documents / Resources

| MiBOXER S2-B 2.4G Rainbow Remote RGB+CCT [pdf] Instruction Manual
S2-B, S2-W, S2-G, S2-B 2.4G Rainbow Remote RGB CCT, 2.4G Rainbow Remote RGB CCT
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>