RONGTA RP420 Label Printer User Manual

RONGTA RP420/RP421 Label Printer User Manual

Product Introduction

Thank you for purchasing the label printer produced by our company.
This label printer provides you with safe, reliable and efficient printing quality at a reasonable economic price. At the same time, RP42X is widely used in supermarkets, Catering industry , clothing industry , warehousing industry, etc.due to its super functions and easy operation.

Safety Warnings

Warning: Do not touch the paper cutting knife or paper-tearing knife of the printer.

Warning: The print head is a heating component. Do not touch the print head and its surrounding components when the printer is still warm in temperature.

Warning: Do not touch the surface of the thermal print head and connectors, to avoid electrostatic damage to the print head.

Main Features

• High printing quality
• Low noise
• The attractive appearance
• Reasonable structure, simple use and maintenance
• Intelligent detection and positioning
• Auto feed and retreat paper
• Simple operation
• Label off intelligent handling function
• Fast printing, saving time
• Superior heat dissipation, can handle heavy printing workload

Safety Instructions

Before operating and using the printer, please carefully read the following items and strictly observe the use rules.

1. Please install the printer on a stable surface to avoid printer suffered from any vibration and shocks.
2. Do not use and store the printer in places with high temperature, high humidity and high pollution.
3. Connect the printer’s power adapter to an appropriate grounding socket. Avoid using the same socket with large motors or other equipment that  may cause voltage fluctuation of power supply.
4. Keep water or conductive materials (such as metal) out of the printer. Once it occurs, Power should be turned off immediately.
5. Never use the printer without paper, otherwise it will seriously damage the printing rubber roller and thermal head.
6. Unplug the product from the power outlet if the printer is idle for a long time.
7. Do not disassemble or modify the product personally.
8. Use only the power adapter specified in this instruction.
9. In order to ensure the printing quality and prolong the service life of the product, it is recommended to use the recommended or equivalent thermal printing paper.
10. Do not plug/unplug the product with the product powered on.
11. When plugging and unplugging the printer power cord, please hold the arrow position of the printer power connector with your hand, not the cord  of the printer power cord.
12. Please keep this manual for the future use and reference.

Appearance and Components

Application Field

• Cashier system of supermarkets
• Cashier system of Catering industry,
• Cashier system of clothing industry
• Cashier system of warehousing industry

Application Field

• Cashier system of supermarkets
• Cashier system of Catering industry,
• Cashier system of clothing industry
• Cashier system of warehousing industry

Technical Parameters

Printing Parameters

Remark: The interface is optional or customized, and the specific interface is subject to the actual object.

Installation and Operation of Printer

Printer Unpacking

Check the parts:

Before use, make sure the accessories are included in the package (the following picture is an example). If any thing is missing, contact the supplier or manufacturer. The specific accessories may not be included depending on the printer model.

The pictures are for reference only. please subject to practically.

Connecting the Printer

• Connect the power line

1. Confirm that the power switch is in off (0) state
2. Connect the power adapter to the printer.
3. Connect the power line to the power adapter.
4. Connect the other end of the power line to a nearby socket.

Use the special power adapter for the printer.
The connection diagram is as follows:

• Connect the USB cable

1. Connect the USB cable to the printer.
2. Connect the USB cable to the PC host.
3. Turn the power switch to on (1) state.

Folded Paper Loading

1. Facing the back of the machine, hold the paper guide with both hands, and adjust the distance between the left and right guides according to the folded paper size.
2. Insert the folded paper into the paper guide
3. Confirm that the printer has detected paper feeding, automatically feeds paper and delivers paper normally

Handling of Paper Jam

1. Move the top cover lever forward with both hands and lift the top cover.
2. Remove the jammed paper from the feeding channel, and check whether the print head has adhesive or carbon deposition. If yes, clean it with an alcohol cloth, remove the wrinkled paper and replace it with new paper.

Bluetooth Pairing and Printing (only valid for printers with Bluetooth)

Bluetooth printer needs to be paired with the main device driving the printer before working, and the pairing process is initiated by the main device.

The general pairing method is as follows:

1. Turn on the printer.
2. The main device searches for external Bluetooth device.
3. If there are multiple external Bluetooth device, select the printer corresponding to BDA address. (see self-test page for details.)
4. Enter the initial password “0000” or “1234”
5. Complete the pairing.

Please refer to the Bluetooth function description of the main device for the specific pairing method. When pairing, the label printer with Bluetooth interface must be on.

Note: During pairing, please do not turn on multiple printers at the same time, otherwise you may not be able to judge which printer was successfully paired.

After successful pairing, other host computers can still be paired with the printer, and each printer can be paired with up to 8 host computers. If more upper computers are paired with printers, the host computer paired with the printer at the earliest will be automatically removed from the pairing list by the printer. At this time, if this host computer needs to drive the printer for printing, it needs to be paired again.
(For multi-connected Bluetooth only.)

Use Bluetooth Interface for Printing (only valid for the printers with

Bluetooth)

For host computers with virtual Bluetooth serial ports (such as mobile phones using SMARTPHONE, POCKET PC, PALM, notebook computer, etc.). after successful pairing, printing data can be sent to the printer via the virtual Bluetooth serial port for printing. If the host computer does not have a virtual Bluetooth serial port, when you want to drive the printer for printing, please consult the supplier of the host computer.

The Switch, Key and Indicator Light of Printer

Precautions for power switch/use

1. Turn the printer power switch to on (1) state, and the printer will be turned on.
2. Turn the printer power switch to on (O) state, and the printer will be turned off.
3. Turn off the printer with power switch. If you pull the power plug directly, it is easy to damage the internal circuit of the printer and cause print data loss.
4. After power-off, wait for a while (not more than 5 seconds) before turning on the printer again otherwise it is likely to cause a failure.
5. Please use the original battery of this machine, otherwise it may lead low print quality or damage to the printer.

Attention:

Make sure the power supply is connected before turning on the printer.

Keys and Indicators

• Function description of buttons

• Indicator description

Printer Test

Print Self-Test Page

When the printer is initially installed or there are any problems with the printer, you can run self-test program to confirm the following status: firmware version, printer parameter setting status, print quality, and related setting information of external devices, etc. After confirming that there is no problem with the printer after the self-test, please check other devices or software. This function runs independently of other devices or software.

The self-test method is as follows:

1. Confirm that the printer is connected to power supply and the paper roll is loaded correctly.
2. Confirm that the printer is turned off and the top cover is closed in place.
3. Press and hold the FEED button, then press the POWER button to turn on the printer; release the button after the printer is turned on.

Print with the Window Driver

1. To install Windows driver, please refer to “Driver Installation Instruction”.
2. Set the “port” of the Windows driver as the appropriate interface to use. Print the test page with the “Print test page” function of Windows driver.

Label Learning

Note: In the following cases, the user can perform label positioning learning so that the printer can better position the label:

• Install and use the printer for the first time.
• First use of printer after sensor cleaning.
• Reuse the printer after it is not used for a long time.
• Replace with a new type of paper roll.
• The printer cannot recognize the mark effectively during printing.

When the printer is ready, press and hold the FEED button for 3s until the standby status indicator flashes twice, release the button, and the printer will start learning and feed paper. If the printer learns under continuous paper mode, the learning is invalid.

Users can also complete the learning through the printer tool software (refer to “Instruction for Printer Setting Tool”.)

Note: After learning, you can re-open the top cover and place the blank label paper just fed during learning back for printing to avoid paper waste.

Cleaning the Printer

Cleaning the Printer Head

Clean the print head when one of the following conditions occurs to the printer:

1. Printing is not clear.
2. A vertical column of the printed page is not clear.
3. The paper feeding noise is high.

The print head cleaning steps are as follows:

1. Turn off the power supply of the printer, , open the upper cover and remove the paper if exists.
2. If printing has just been completed, wait for the print head to cool completely.
3. Clean the printer head with a soft cotton moistened with ethyl alcohol.
4. After waiting for absolute ethyl alcohol to volatilize completely, close the upper cover and try printing again.

Cleaning the Sensor

Clean the paper shortage sensor when one of the following conditions occurs to the printer:

1. In the printing process, the printer occasionally stops printing and alarms for paper shortage.
2. No alarm for paper shortage.

The paper shortage sensor cleaning steps are as follows:

1. Turn off the power supply of the printer, open the upper cover, and remove the paper if there is any.
2. Wipe off the dust and stain on the sensor surface with soft cotton cloth (which should be dried) dipped in absolute ethyl alcohol.
3. After waiting for absolute ethyl alcohol to volatilize completely, close the upper cover and try to start the machine again.

Cleaning the Printing Rubber Roller

When one of the following conditions occurs to the printer, the printing rubber roller should be cleaned:

1. Printing is not clear.
2. A vertical column of the printed page is not clear.
3. The paper feeding noise is high.

The printing Rubber Rollers cleaning steps are as follows:

1. Turn off the power of the printer and open the upper cover.
2. Use a soft cotton cloth (which should be dried) dipped in a neutral detergent to wipe off dust and stains on the surface of the printing rubber roller.
3. Close the upper cover after the cleaning agent is completely volatilized.

Attention:

1. The power supply must be turned off during the daily maintenance of the printer.
2. Do not touch the surface of the print head with hands and metal objects, and do not scratch the surface of the print head, printing rubber roller and sensor with tweezers and other tools.
3. The organic solvents such as gasoline and acetone shall not be used.
4. Wait until absolute ethyl alcohol is completely volatilized, then turn on the power supply to continue printing.

Troubleshooting

The table below shows common problems and solutions for operators.
If you have followed the simple troubleshooting methods but the printer is still not functioning properly, please contact the customer service department of your dealer for assistance.

FCC WARNING

Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.used for a long time, remove the battery and store it separately.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Rongta Technology (Xiamen) Group Co., Ltd.
ADD: No. 889 Xinmin Avenue, Tongan District, Xiamen, China
WEB: www.rongtatech.com
TEL: 0086-592-5666129 FAX: 0086-592-5659169

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>