HUBTEX DQX Forklift Truck Owner’s Manual
- June 3, 2024
- HUBTEX
Table of Contents
- HUBTEX DQX Forklift Truck
- FOR DEMANDING OUTDOOR APPLICATIONS
- A detailed look at the fourway sideloader
- Properties
- Improved comfort and better visibility
- OPTIMUM ALL-ROUND VISIBILITY
- FORK CARRIAGE AND LIFTING MAST
- ENGINE
- STEERING SYSTEM
- HUBTEX VEHICLES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUBTEX DQX Forklift Truck
LOAD CAPACITIES OF UP TO 4.5 TONS LIFT HEIGHTS UP TO 7500 MM
FOR DEMANDING OUTDOOR APPLICATIONS
POWERFUL DRIVE
With the DQ-X, HUBTEX introduces a new generation of all-wheel fourway
forklifts for both indoor and outdoor use. The driver is at the forefront of
the new development. The cabin is designed for optimum ergonomics and the more
compact masts and fork carriages provide all-round visibility. An intelligent
truck controller combined with the latest engine technologies minimises noise,
exhaust emissions and energy consumption. The truck can be used in a wide
range of applications for transporting long goods in narrow aisles or as a
conventional front loader for pallet and block stacking.
A detailed look at the fourway sideloader
- Three in one:
- Front loader, sideloader, fourway forklift
- Load capacities of up to 4.5 t
- Powerful diesel or gas engine
- Energy-saving Eco mode available
- All-wheel drive
- Tighter turning radii
- Optimum all-round visibility
- Compact lift mast
Properties
- Load capacity (t) 4,5
- Lift height (mm) up to 7500
- Frame length (mm) 2450
- Frame 3-wheel
- Tyres Super elastic
- Motorisation Diesel / LPG
- Speed (km/h) 13
- Cabin Transverse seat
Improved comfort and better visibility
CABIN
The larger cabin offers the driver the greatest possible comfort and freedom
of movement. All truck data is clearly presented on a colour display. The
large display informs the driver about the wheel position and all important
operating conditions. The hydraulic functions are conveniently operated using
fingertips only. The arrangement of the glass panes makes annoying reflections
a thing of the past
Depending on the application, you can switch between the three driving modes Eco, Sensitive and Speed. This can reduce exhaust emissions and fuel consumption.
The innovative stabilisation assistant prevents unwanted rocking movements when braking hard.
OPTIMUM ALL-ROUND VISIBILITY
The improved cabin design providesoptimal all-round visibility. The driver has a significantly larger range of vision than comparable competitor models. Ergonomic control using fingertips and the travel direction switch enables quick and convenient operation.
FORK CARRIAGE AND LIFTING MAST
The lifting mast and fork carriage have been specially developed for this series. The main focus of development was on improving the visibility of the load. This has resulted in very compact lifting masts and fork carriages.
ENGINE
The DQ-X impresses with its particularly energy-efficient engine. Thanks to the combination of intelligent engine control, pumps and fans, the new truck is the first of its kind to offer an energy-saving Eco mode. This can reduce fuel consumption by 30 percent. As an added bonus, noise has been reduced to a minimum.
Reduced-noise turbo engine in line with the current emissions standard
STEERING SYSTEM
The innovative steering mechanism has a steering angle that is 20° larger than comparable previous models. This enables the DQ-X to navigate a significantly tighter turning circle. In addition, the switching times from longitudinal to transverse travel have been significantly reduced. When driving normally, the time it takes to change direction is reduced by up to 40 percent. These optimisations enable a significantly faster turnover of goods as well as improved manoeuvrability.
The parking brake is automatically activated when changing direction https://www.besttruckmanuals.com/
HUBTEX VEHICLES
ELECTRIC-MULTIDIRECTIONAL-SIDELOADERS > DIESEL-/GAS-FOUR-WAY-SIDELOADERS > MULTIDIRECTIONAL COUNTERBALANCE FORKLIFT > ORDER PICKING SYSTEMS > GLASSTRANSPORT SYSTEMS > HEAVY DUT Y TRANSPORT VEHICLES > REACH TRUCKS > SPECIAL TRUCKS > SECOND-HAND-AND RENTAL EQUIPMENT
HUBTEX MASCHINENBAU GMBH & CO. KG · Industriepark West · Werner-von-Siemens- Str. 8 · 36041 Fulda, Germany Tel.: +49 661 8382-0 · Fax: +49 661 8382-120 · info@hubtex.com · www.hubtex.com