Pyle USA SQBXM-1 Portable Design Boxing Mat User Guide

: June 12, 2024
: Pyle USA

Table of Contents

Pyle USA SQBXM-1 Portable Design Boxing Mat
Product Information
What’s in the Box
Product Usage Instructions
Troubleshooting
Features
Technical Specs
Instructions
ASSEMBLY INSTRUCTIONS
How to adjust the height
LCD SCREEN FUNCTIONS INSTRUNCTIONS
Mode Instructions
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pyle USA SQBXM-1 Portable Design Boxing Mat

Product Information

This product is a portable boxing mat with an accurate digital counter. It comes with a complete Digital Training Program and requires the download of the SQUATZ APP to start training. The maximum testable punching strength is 661LBS, and it only works when you punch the unit. The product includes assembly instructions and two installation methods. The height of the screen should be at eye-level. The product also features an LCD screen with various functions and two modes: Training Mode and Strike Mode.

What’s in the Box

Portable design boxing mat
Accurate Digital Counter
Plastic nails for wall installation

Product Usage Instructions

Assembly Instructions:

The boxing mat must be assembled by adults to ensure it is assembled correctly before use.

Installation Method 1:

Tear off the upper adhesive.
Secure the boxing mat in place.
Tear off the bottom adhesive.
Smooth down the adhesive.

Note: The height of the screen from the ground should be at your eye- level.

Installation Method 2:

Fasten the plastic nails to the wall.
Refer to the picture above and fix all nails.
Hang the boxing mat on the nails.

LCD Screen Functions Instructions:

Press the SET button on the unit to perform various functions:

Press once to turn ON the screen.
Press once to switch units from KG to LB.
Press twice to set the unit.
Press twice to turn on or off the screen’s background light.
Press three times to change training modes.
Hold down the SET button for three seconds or longer to reset the counter to ZERO or turn off the unit completely.

Mode Instructions:

The unit has two modes: Training Mode and Strike Mode.

Training Mode: Intended for daily practice use.
Strike Mode: For game and competition use.

To switch between modes, press the SET button three times.

Note: In Strike Mode, the unit will only record and display the maximum punching strength after you punch. Wait for the screen to display and log your punch before using the mat again.

Troubleshooting

Problem	Reason	Solution
Screen not ON	Unit not turned ON	Turn ON the unit
Screen shows LO	Lack of power	Charge the unit
Screen flashing	Lack of power	Charge the unit
No data after punch	Punch strength not enough	Punch harder
Mark shows on screen	Punching strength beyond limitation	Redo the test
Inner punch sound from the unit	Inner tester works	Normal
Wrong data when you test on floor	Wrong operations	Need to restart
Data no changes	Normal	Fix the unit on the wall or turn off the unit and

wait for 3
mins, then restart
Wrong data after you get the product| Wrong data caused during transportation| Press and hold SET button to clear the wrong data

Features

Automated Screen System
661 Lbs. Max Testable Punching Strength
Works when Unit is Punch
Perpendicular Angle Punching Unit
Unit Contain Lithium Battery
Comes with other Devices
0.79’’ Thickness Built-in Foam
ORers Better Protection to the Hands while Punching
Suitable to use on smooth and secured surfaces

What’s in the Box:

Boxing Mat
(2) Adhesive Straps
(6) Plastic Nails
Power Cord

Technical Specs

Construction Material: Pearl Cotton, Vegan Leather, Composite Structural Board
Charge Capacity: 5V 1A
Weight Capacity: 661 Lbs.
Product Dimensions (L x W x H): 15.75″ x 15.75″ x 2.56″ -inches

This product comes with a complete Digital Training Program! Download the SQUATZ APP to start Training!

Instructions

Portable design boxing Mat with accurate Digital Counter.
Max Testable Punching strength is 661LBS. 0nIy works when you punch the unit.
Please punch and use the device employing proper form. Improper or unintended use of this product may result in damaging or breaking this device.
This device contains a lithium Battery. For your safety, use the device and the battery as intended and instructed by the factory.
lt is recommended that this product be used with appropriate gear and boxing gloves.
InstaII the device on a secure, stable, and smooth surface or wall. You can secure the mat utilizing the provided 6 plastic fasteners.
Store in a cool and dry place.
Clean unit by wiping surface with a damp cloth. This product is not waterproof or machine washable.
Aim and punch the padded surface of the mat – do not punch the screen to avoid product damage or injury.
Press the power button to turn the screen/device ON OR punch the device with a force equal to 2 Ibs of force.
The screen light will deactivate after one minute of idleness. The Mat will turn o after 3 minutes of inactivity.

ASSEMBLY INSTRUCTIONS

The Boxing Mat must be assembled by adults to make sure it’s assembled in thecorrect manner before using.

INSTALLATION METHOD 1

Tear of the upper adhesive
Secure the Boxing mat in place
Tear of the bottom adhesive
Smooth down the adhesive

Note: The height of the screen from the ground shouId be at your eye- level.

How to adjust the height

Tear of the Boxing mat
Paste it to a suitable height ****

INSTALLATION METHOD 2

Fasten the plastic nails to the wall
Refer to the picture above and fix all nails
Hang the Boxing mat on the nails

LCD SCREEN FUNCTIONS INSTRUNCTIONS

Press the One time SET button:

When the unit is 0ff, press the SET BUTTON one time to turn ON the screen.
When the unit turns 0n, press the SET BUTTON one time to switch units from KG to LB.
Press the SET BUTTON twice to set unit.
Press the SET BUTTON twice to turn on or of the screen’s background light.
Press the SET BUTTON three times to change training modes.

Hold down the SET BUTTON for three seconds or longer to:

Reset the counter to ZERO.
Turn Off the unit – total power down.

Mode Instructions

Unit have two Modes: Training Mode and Strike Mode
Training Mode: Training Mode is intended for daily practice use.
Strike Mode: Strike Mode is for Game and Competitions use.
Mode Switch: Press Three times SET button to switch Training Mode and Strike Mode.

Notes: In Strike Mode, unit will only record and display the max punching strength after you punch. It will display 1 second later after you punch. Wait for the screen todisplay and log your punch before using the MAT again.

TROUBLESHOOTING

PROBLEMS	REAS0NS	SOLUTIONS
1. Screen not ON	Unit not turned ON	Turn ON the unit
2. Screen shows LO	Lack of power	Charge the unit
3. Screen flashing	Lack of power	Charge the unit
4. No data after punch	Punch strength not enough	Punch harder
5. “ mark shows on screen	Punching strength beyond limitation	Redo the