AEG BPK722910M SenseCook Pyrolytic Oven

Product Specifications

• Model: BPK722910M
• Front Frame
• Various assemblies included: Oven, Chassis, Panel Deck, Control Panel, Internal Pack, Oven Door

Product Usage Instructions

Oven Assembly

Ensure all parts are securely assembled following Drawing 8442.

Chassis Assembly

Assemble the bottom panel, side panels, housing, top panel, cover, and other components according to Drawing 7955.

Panel Deck Assembly

Install the panel deck, cooling fan motor, door lock assembly, and resistor as per Drawing 8302.

Control Panel Assembly

Mount the control panel, touch sensor, controller, temperature sensor, and other components following Drawing 8437.

Internal Pack

Set up the dish grill, slide set, rack insert, grill dish carrier, shelf, oven racks, and food probe assembly as detailed in Drawing 8304a.

Oven Door Assembly

Assemble the oven door components including the handle, spacers, screws, glass panels, vent cap, and hinges according to Drawing 8438.

Frequently Asked Questions

• Q: How do I clean the oven?
  • A: To clean the oven, make sure it is turned off and cooled down. Remove all racks and accessories. Wipe the interior with a damp cloth and mild detergent. For stubborn stains, use a non-abrasive cleaner.
• Q: What should I do if the control panel display is not working?
  • A: Check the power source and connections. If the issue persists, contact customer support for further assistance.

A11373601
MODEL: BPK722910M
FRONT FRAME

EX DRAWING 8439

ITEM PART Nº
1 0208 003 471 2 0589 001 032 3 A12385607 4 0702 005 002 5 339662613
N.I. 0712 015 030 N.I. 0150 005 271

DESCRIPTION

Ex 8439

SEAL OVEN VULCAN PYRO BUMPER STOP BLACK FRAME FR ENA PYRO GENE BUILTIN SCREW

8 X1/2 PH2 NYLON WASH RECEPTACLE ASSY FOOD SENSOR

BUSH MOUNTING FRAME NGD SCREW M4X5 HEX1/4′ PH2 BLK ZP

QTY
1 2 1 6 1
2 4

Page 8 CE1339.docx Issue: 1 Classified as Internal

A12445901
MODEL: BPK722910M OVEN ASSEMBLY

Ex Drawing 8442

Classified as Internal

Page 9 CE1339.docx Issue: 1

0402 001 140
MODEL: BPK722910M CHASSIS ASSEMBLY

Ex Drawing 7955

ITEM PART Nº
1 0038 006 928 2 0133 002 230 3 A11360202 4 561 1671 20 5 0038 006 941 6 0038 006 942 7 0022 041 136 8 A11360201 9 0133 002 231

DESCRIPTION

Ex 7955

PANEL BOTTOM BUILTIN VULCAN COUNTER SUPP LH VULCAN BUILTIN PANEL LH SIDE BUILTIN VULCAN HOUSING CENTRERING HELP PANELTOP BUILTIN VULCAN PANEL BACK BUILTIN VULCAN PLATE CVR TERM ELEC BIOS PANEL RH SIDE BUILTIN VULCAN COUNTER SUPP RH VULCAN BUILTIN

N.I. 0701 009 033 N.I. 0547 001 127

SCREW #8 X 8MM HEX/MULTI GROMMET BUILTIN VULCAN

QTY
1 1 1 4 1 1 1 1 1
X 1

Classified as Internal

Page 11 CE1339.docx Issue: 1

0038 003 378 PYRO
MODEL: BPK722910M PANEL DECK ASSEMBLY

Ex Drawing 8302

ITEM PART Nº
1 0038 003 377 2 0701 009 033 3 0214 002 138 4 387 1090 00
N.I. 387 1167 05

DESCRIPTION

Ex 8302

PANEL DECK GLUE ASS PYRO COBRA SCREW #8 X 8MM HEX/MULTI MOTOR FAN COOLING PYRO VULCAN DOOR LOCK ASSEMBLY

RESISTOR 1050 OHM 20W PYRO

QTY
1 X 1 1
1

Page 12 CE1339.docx Issue: 1 Classified as Internal

A11058801
MODEL: BPK722910M CONTROL PANEL ASSEMBLY

Ex Drawing 8437

ITEM PART Nº
1 A11119601 2 A11667002 3 561 7665 00 4 A05761158 5 0173 100 447 6 A04614905 7 389 0818 03 8 0030 024 212 9 0633 001 001

DESCRIPTION

Ex 8437

PNL ASY CTRL & CLIP AEG GENESY INSULATOR SPILL KRONOS VULCAN SENSOR TOUCH 10 HORIZONTAL CONTROL VCU+ PRG BPK722910M HARNESS K2 INTERFACE VULCAN COVER REAR VCU+ CONTROLLER TEMPERATURE SENSOR PT500 575MM BRACKET KRONOS PROBE MOUNT BIO RELAY 30A SINGLE POLE 240V

QTY
1 1 1 1 1 1 1 1 1

Classified as Internal

Page 13 CE1339.docx Issue: 1

0263 010 688 ML10
MODEL: BPK722910M INTERNAL PACK

Ex Drawing 8304a

ITEM PART Nº

DESCRIPTION

Ex 8304a

QTY

1 0036 001 122

DISH GRILL ENAMELLED VULCAN

2

2 561185311

SLIDE DOUBLE EXT 1 SET

2

3

AS ABOVE

4 0327 001 335

RACK INSERT GRILL DISH VULCAN

2

5 A14083201

GRILL DISH CARRIER E100 90CM

1

6 A13098101

SHELF E100 90CM

2

7 A10927602

RACK SIDE OVEN EASY LH E100

1

8 A10927601

RACK SIDE OVEN EASY RH E100

1

N.I. 807822608

PROBE FOOD ASSY 3.5X700MM

1

A12894301 RACK PACK E100 90CM EASY ACCES (INC ITEM 4, 5, 6, 7 & 8)

Page 14 CE1339.docx Issue: 1 Classified as Internal

A11059401
MODEL: BPK722910M OVEN DOOR ASSEMBLY

Ex Drawing 8438

ITEM PART Nº

DESCRIPTION

Ex 8438

1 A11533401 HANDLE OVEN DOOR AEG GENESYS

2 N.P.N.

SPACER HANDLE PART OF ITEM 1

3 N.P.N.

SCREW PART OF ITEM 1

4 A04412401 SUPPORT HANDLE PR AEG VISION

5 A11059501 DOOR OVEN OUTR ASSY AEG GENESY

6 561231150 SCREW M4 X 50 PAN GENESYS

7 A02668701 GLASS OV DR MID 2 COBRA

8 A06170201 GLASS OV DR MID1 REFL VULCAN

9 A06170101 GLASS OV DR INNER BOROSILICATE

10 A02493902 VENT DOOR TOP CAP ASSY COBRA

11 A05916708 HINGE LEFT SOFTCLOSE GENESYS

QTY
1 2 2 2 1 2 1 1 1 1 2

Classified as Internal

Page 15 CE1339.docx Issue: 1

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for
many years, with innovative technologies that help make life simpler features you might not find on ordinary
appliances. Please spend a few minutes reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
aegaustralia.com.au/support/ | aegnewzealand.co.nz/support/
Register your product for better service:
aegaustralia.com.au/support/product-registration/ | aegnewzealand.co.nz/support/product-registration
Buy accessories, consumables and original spare parts for your appliance
aegaustralia.com.au | www.aegnewzealand.co.nz
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Important Information that may impact your Manufacturer’s Warranty
Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the AEG manufacturer’s warranty provided with your product. Products must be used, installed and operated in
accordance with this manual. You may not be able to claim on the AEG manufacturer’s
warranty in the event that your product fault is due to failure to adhere this manual.

1. SAFETY INFORMATION
The symbols you will see in this booklet have these meanings
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
Before the installation and use of the appliance, carefully read the supplied instructions.
The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible
location for future reference.
IMPORTANT INFORMATION
Important – check for any damages or marks.
• If you find the oven is damaged or marked, you must report it within 7 days if you
wish to claim for damage/marks under the manufacturer’s warranty. This does not
affect your statutory rights.
• Discolouration of the enamel has no effect on the performance of the appliance.
ENVIRONMENT
Information on disposal for users
• Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
• If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
1.1 Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of it appropriately.
• Keep children and pets away from the appliance when it operates or when it cools
down. Accessible parts are hot.
• If the appliance has a child safety device, this should be activated.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Children aged 3 years and under must be kept away from this appliance when it is in
operation at all times.
1.2 General Safety
• Only a qualified person must install this appliance and carry out servicing.
(Certificate of Compliance to be retained).

WARNING! The appliance and its accessible parts become hot during use.
Care should be taken to avoid touching heating elements.
Children shall be kept away unless continuously supervised.
• Always use oven gloves to remove or put in accessories or ovenware.
• Before carrying out any maintenance, disconnect the appliance from the power supply.
• Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
• Excessive spillage must be removed before the pyrolytic cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the shelf support and then the
rear end away from the side walls. Install the shelf supports in the opposite sequence.
• The means for disconnection must be incorporated in the fixed wiring in accordance
with the wiring rules.
• Use only the food sensor (core temperature sensor) recommended for this appliance.

2. CONDITIONS OF USE
This appliance is intended to be used inhousehold and similar applications such as:
• Farm houses
• By clients in serviced apartments, holiday apartments and other residential type environments.
• Staff kitchen areas in shops, offices and other working environments, Bed and
breakfast type environments
3. SAFETY INSTRUCTIONS
3.1 Installation
WARNING! Only a qualified person must install this appliance and carry out servicing. (Certificate of Compliance to be retained)
• Remove all the packaging
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
CAUTION! Avoid sharp edges during handling.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safe structures.
• Where the appliance is built into a cabinet, the cabinet material must be capable of withstanding 70°C. If adjacent to vinyl-wrapped surfaces, use installation kit
from vinyl wrap supplier.
• The sides of the appliance must stay adjacent to appliances or to units with the same height.
• The appliance is equipped with an electric cooling system. It must be operated
with the electric power supply.
• The appliance must be not installed behind a decorative door in order to avoid overheating.

3.2 Electrical connection WARNING! Risk of fire and electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains.
The isolation device must have a contact opening width of minimum
3 mm.
• A means for disconnection must
be incorporated in fixed wiring in
accordance with the wiring rules.
• Switch the appliance off before
removing the oven light glass for
globe replacement
3.3 Use WARNING! Risk of injury, burns and electrical shock or explosion.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the grill operation stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully.
The use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to come in contact with the appliance when you open the door.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
CAUTION! Risk of damage to the appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other
objects in the appliance directly on
the base of the oven.
– do not put aluminium foil directly
on the bottom of cavity of the
appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food
in the appliance after you finish the
cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel or stainless steel has no effect on the performance of the appliance.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
• Always cook with the oven door closed
3.4 Care and cleaning WARNING! Risk of injury, fire, or damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains
• Make sure the appliance is cold. There is the risk that the glass panels can break.
• Care must be taken when wiping
exposed stainless steel edges. They can
be sharp!
• Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
• The door glass on this appliance is
made from a tough, durable material that
withstands heating and cooling without
breaking. As a precaution however, do
not put cold water on hot glass.
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Ensure fats and oils do not accumulate
around elements, burners or fans.
• Clean the appliance with a moist soft cloth. Only use neutral detergents.
• Do not use any abrasive products,
abrasive cleaning pads, solvents or metal
objects.
• If you use an oven spray, follow the
safety instruction on it’s packaging.
• Always clean the appliance immediately
after any food spills.
3.5 Pyrolytic cleaning WARNING! Risk of Injury / Fires /
Chemical Emissions (Fumes) in
Pyrolytic Mode.
• Before carrying out a Pyrolitic
selfcleaning function or the First Use
please remove from the oven cavity:
– any excess food residues, oil or
grease spills / deposits.
– any removable objects (including
shelves, side rails, food sensor,
etc., provided with the product)
particularly any non-stick pots,
pans, trays, utensils etc
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the appliance while the Pyrolytic cleaning is in operation.
The appliance becomes very hot and
hot air is released from the front cooling
vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction materials, as such consumers are strongly advised to:
– provide good ventilation during and after each Pyrolytic cleaning.
– provide good ventilation during and after the first use at maximum temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive
to potential fumes emitted during the
cleaning process of all Pyrolytic Ovens.
– Remove any pets (especially birds) from the vicinity of the appliance location during and after the
Pyrolytic cleaning and first use
maximum temperature operation to
a well ventilated area.
• Small pets can also be highly sensitive to the localized temperature changes in the vicinity of all Pyrolytic Ovens when
the Pyrolytic self cleaning program is in operation.
• Non-stick surfaces on pots, pans, trays, utensils etc., can be damaged by the high temperature Pyrolytic cleaning operation of all Pyrolytic Ovens and can be also a source for low level harmful
fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as
described are not harmful to humans,
including infants.
3.6 Internal light • The type of light bulb or halogen lamp
used for this appliance is only for
household appliances Do not use it
for house lighting.
WARNING! Risk of
electrical shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
3.7 Disposal
WARNING! Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
3.8 Service • To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only. • To maintain safe operation, it is recommended that the product be inspected every 5 years by an authorised service person.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>