Lofree OEP01 Wanderfree Bluetooth Mechanical Keyboard User Manual
- June 6, 2024
- Lofree
Table of Contents
- Lofree OEP01 Wanderfree Bluetooth Mechanical Keyboard
- Battery Indicator
- OS Switch
- Caps Lock/Bluetooth Indicators
- Status switch
- DETAILED USER GUIDE
- Bluetooth/Wired mode (toggle switch)
- Battery Saver
- OS Switch
- MULTIMEDIA FUNCTIONS:
- NAME AND CONTENT OF HAZARDOUS SUBSTANCES IN
- ENVIRONMENTAL PROTECTION INSTRUCTIONS:
- FCC Statement:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lofree OEP01 Wanderfree Bluetooth Mechanical Keyboard
Battery Indicator
- When the power is lower than 20%, the indicator light flashes slowly in red;
- When charging, the indicator light is steady red;
- When the battery is fully charged, the indicator light is steady
OS Switch
- Switch between “Windows/Android system” mode and
- “Mac/iOS system” mode or vice versa
Caps Lock/Bluetooth Indicators
Caps Lock Indicator
- Solid LED light= The uppercase mode is turned on;
- LED light off= The uppercase mode is turned off;
Bluetooth Pairing Indicator
-
Flashing LED light= The device is in Bluetooth pairing mode;
When successfully paired, the Pairing indicator turns on for 3seconds, and then turn off again; -
During each switch to a new device, the Pairing Indicator
flashes quickly for 3 seconds, and then turns off again;
Status switch
BT: Bluetooth mode /ON: Wired mode/ OFF: Off
Type-C SV interface
Charging mode/Wired mode interface.
Multifunctional bracket
The inside of the top cover comes with a multi-function bracket. which can
be used by inserting the mobile phone into the bracket
DETAILED USER GUIDE
Recharge
When the power of th_is product is less than 20%, the battery indicator flashes red slowly. Please use the standard Type-C cable for charging.
During the charging process, the Battery Indicator is steady red; When the
battery is fully charged., the latter Indicator Is steady white;
Note: Insert the Type-C cable into the USB -, a port on the computer to
charge the product (the product can be charged in the Bluetooth/ Wired/Off
state).
Bluetooth/Wired mode (toggle switch)
Wired Mode
Switch “State Switching and Off”. to ON, and then connect to the computer with
a Type- cable to switch to wired mode.
Note: In Wired mode, the keyboard will not automatically enter the
power-saving mode
Bluetooth Mode
In Bluetooth mode, long press FN+ 1, and then search for “Wanderfree@Lofree”
on the computer systems to connect the keyboard to your device Yoe can connect
to another device through FN 12\FN 13 as above. To connect multiple. devices,
short press FN+l\FN+2\FN+3 to switch •• l between devices. “”
Note: Due to a large number of Bluetooth versions available and other
reasons, prob- items such as slow connection or connection failure may occur
durl ng the first connection, Please check whether the settings are correct
and try again
Switch Bluetooth devices
- Short press the combination keys “FN+ 1” /
- “FN+ 2” / “FN+3” to switch to another device
Turn off the keyboard
Switch_the keyboa_rd to OFF, You can still charge It even when It Is off.
Battery Saver
Under Bluetooth mode, the keyboard enters into sleep mode after ten minutes of inactivity. Click any button to wake the keyboard. When the battery is below 20%, the keyboard battery indicator will show flashing red
OS Switch
(Switch from Mac/iOS to Windows/Android and vice versa)
Mac/Ios os
Turn the switch to Mac/iOS when you are connected to a Mac/iOS operating
system The multimedia keys can be triggered directly,
whiletheFl-Fl2functionscanbeactivatedby pressing “FN” simultaneously.
Windows/Android OS
Turn the switch to Windows/Android when you are connected to a Windows/Android operating system. The Fl-Fl2 functions can be triggered directly, while the multimedia, keys can be activated by pressing “FN” simul-tancously.
MULTIMEDIA FUNCTIONS:
NAME AND CONTENT OF HAZARDOUS SUBSTANCES IN
PRODUCT:
- This table is prepared in accordance with the provisions of SJ/T 11364.
- The classification and marking of this product was performed in accordance with the EU directive 2011/65/EU and the revised directive 2015/863/EU.
- 0: Indicates that the said hazardous substance contained in all the homogeneous materials for this component is below the limit requirement in GB/T26572
- X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572
ENVIRONMENTAL PROTECTION INSTRUCTIONS:
The hazardous substances contained in the electronic parts of this product
will not leak or change under normal use conditions for a period of ten years.
During the same period, the electronic components of this product will not
cause serious environmental pollution or serious. damage to human health or
property while the products arc being used by the consumer. According to the
Chinese electronic industry-standard SJ/T, 11364-2014 and related Chinese
government regulations, this
product and some of its internal or external components may have an
environmentally friendly use period mark, depending on the component and
component manufacturer, the mark lifespan on the product and its components
may vary. The expiration date on the component takes precedence over any
conflicted or different UFUP labels on the product.
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>