Lofree FLOW OE915 Mechanical Keyboard Instruction Manual
- June 12, 2024
- Lofree
Table of Contents
Lofree FLOW OE915 Mechanical Keyboard
SPECIFICATIONS
- Number of keys: 84 (Hot-swappable Supported)
- Numbers of Multifunction Keys: 16
- Materials: Aluminum Alloy Unibody, PBT Keycaps
- Interface: Type-C
- Mode: Wired/Bluetooth
- Bluetooth Name: Flow84@Lofree
- Dimensions: 316 mm x 126 mm x 24.5 mm
Diagram
Battery Indicator
- Charging: Indicator on breathing white
- Charged: Indicator always on white
- Battery<20%, Indicator on breathing red
- Battery<5%, Indicator flashes till off
Caps Lock/Status Indicator(White & Blue)
-
Caps Lock Indicator(White)
- Indicator white light enabled: Caps lock on
- Indicator white light disabled: Caps lock off
-
Bluetooth Pairing Indicator(Blue) During Bluetooth pairing, the Indicator blinks slowly for 1 min; after success, the Indicator keeps on for 3s During device switching, the Indicator flashes for 3s; after success, Indicator keeps on for 3s During Bluetooth connecting back, Indicator keeps on flashing; after success, the Indicator is turned off
-
Ambient Light
Steady/Breathe/Off Ambient Light Color Switch -
Mode Switch
Off/On/BT -
Type C Interface
Wired/Charge
Detailed Operation
Wired Connection:
-
Toggle the mode switch to ON
-
Connect the keyboard to the device with the attached Type C cable to complete the wired connection mode
Bluetooth Connection:
- Toggle the mode switch to BT
- Long Press Fn+1/Fn+2 /Fn+3 until indicator blinks slowly on Blue
- Find and pair “Flow84@Lofree” on your list of paired devices
- Status Indicator: Indicator keeps on for 3s and turns off
- Fn+1/Fn+2/Fn+3= Switch Bluetooth Device
Use of Ambient Light:
- FN++:
- Steady/Breathe/Off
- FN + -›:
- Ambient Light Color Switch
System Switch
- Fn+N in the lower right corner is to trigger the Fn corresponding system function key of windows/Android Fn+M in the lower right corner is to trigger the corresponding system function key of Mac/IOS
Multifunction Keys
- Fn + F1 …. Del =Multimedia Key
NAME AND CONTENT OF HAZARD OUS SUBSTANCES IN PRODUCT:
This table is prepared in accordance with the provisions of SJ/T 11364. The classification and marking of this product was performed in accordance with the EU directive 2011/65/EU and the revised directive 2015/863/EU.
- O: Indicates that the said hazardous substance contained in all the homogeneous materials for this component is below the limit requirement in GB/T 26572.
- X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the it requirement in GB/T 26572.
ENVIRONMENTAL PROTECTION INSTRUCTIONS
The hazardous substances contained in the electronic parts of this product
will not leak or change under normal use conditions for a period of often
years. During the same period, the electronic components of this product will
not cause serious environ- mental pollution or serious damage to human health
or property while the products are being used by the consumer. According to
the Chinese electronic industry standard SJ/T 11364-2014 and related Chinese
government regulations, this product and some of its internal or external
components may have an environmentally friendly use period mark, depending on
the component and component manufacturer, the mark lifespan on the product and
its components may vary. The expiration date on the component takes precedence
over any conflicted or different UFUP [abelson the product.
Warning
- If the battery is not replaced properly, there may be leakage or explosion and personal injury hazards.
- Do not use the battery when there is leakage, discoloration, deformation, or any other abnormality.
- Do not leave the battery in a discharged or unused state for a long time.
- Do not short-circuit the product
- Battery life varies with usage. Used batteries should be disposed of in accordance with local laws or thrown away in trash cans for recycling electronic devices.
- If any liquid accidentally enters the product, please immediately disconnect the power supply and remove the product. Continuing to use the product may cause fire or electric shock. Please contact the agent or the nearest customer service center for inspection and maintenance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>