Lofree OE909 TOUCH Triple Mode Wireless Mouse User Manual

Lofree OE909 TOUCH Triple Mode Wireless Mouse

Product Information

Specifications

• Model: LO Free
• Dimensions: 75 x 100 (h) mm
• Weight: 80 g
• Mode: Touchpie Mode
• Wireless Mouse
• Power Supply: 1x AAA battery
• Compatibility: Windows, Mac, Linux

Product Usage Instructions

Installation
To begin using the LO Free wireless mouse, follow these steps:

1. Insert a AAA battery into the battery compartment located on the underside of the mouse.
2. Turn on your computer and make sure the wireless receiver is connected to an available USB port.
3. Press the power button on the bottom of the mouse to turn it on.
4. The mouse will automatically connect to the receiver and is ready for use.

Mouse Operation
The LO Free wireless mouse features touch-sensitive controls:

• To move the cursor, gently glide your finger across the surface of the mouse.
• To left-click, tap once on the surface of the mouse.
• To right-click, tap twice on the surface of the mouse.
• To scroll up or down, use two fingers and swipe up or down on the surface of the mouse.

Power Saving Mode
The LO Free wireless mouse has a power-saving mode to conserve battery life:

• If the mouse is idle for a certain period, it will automatically enter sleep mode.
• To wake up the mouse, simply move it or click any button.

Troubleshooting
If you encounter any issues with the LO Free wireless mouse, please try the following:

• Make sure the battery is properly inserted and has sufficient charge.
• Check that the wireless receiver is securely connected to the USB port.
• Try using the mouse on a different surface or mouse pad.
• Restart your computer and ensure all drivers are up to date.

FAQ (Frequently Asked Questions)

• Q: Is the LO Free wireless mouse compatible with Mac computers?
  A: Yes, the LO Free wireless mouse is compatible with Windows, Mac, and Linux operating systems.

• Q: How do I change the battery in the LO Free wireless mouse?
  A: To change the battery, simply open the battery compartment on the underside of the mouse and replace the AAA battery.

• Q: Can I use the LO Free wireless mouse without the wireless receiver?
  A: No, the wireless receiver is required for the LO Free wireless mouse to connect to your computer.

SPECIFICATIONS

• Battery: Li-ion 3.7V 650m Ah
• DPI: 800/1600/2400/3600/4000/Custom Mode
• Dimensions: 108 x 68.5 x 42.5m m
• Weight: 105.5g
• Number of Buttons: 7 Buttons and 1 On/Off Switch
• Connectivity: Wired + Bluetooth + 24GHz
• Bluetooth Name: Touch@Lofree
• 2.4GHz Trans mitted Power: <10mW(e.I.r.p)
• Suitable for: iPhone/Pad/Nacbook/IMac/Android Phone and Tablet(HID protocol supported)
• System Requirements:
  Under Bluetooth connection, only Windows 8 and above are supported. For Windows 7 and below, please use the 2.4GHz connection.

Diagram

Overview

1. Type-C Interface
2. Wheel
3. Left Button
4. Right Button
5. Display Screen
6. DPI Button
7. Forward Butten
8. Backward Button
9. Sensor
10. On/Off
11. Mode Switch
12. 2.4G Receiver

Note:
Mac system devices do not support forward or backward functions in Bluetooth mode.

Detailed Operation

1. Wired Connection Mode

   • Turn the bottom switch of the mouse to the “ON” position.
   • Press the mode switch button.
   • Observe the display and check whether the mode is switched to Wired mode.
   • Take out the Type C data cable attached to this product connect it to the computer, and then switch to the wired connection mode.

2. Bluetooth Connection Mode

   • Turn the bottom switch of the mouse to the “ON” position.
   • Observe the display screen and press the mode switch button to switch the mode to Bluetooth connection mode.
   • Long press the rode switch button for 3S, and the Bluetooth symbol on the display blinks.
   • Open the connected device and search for the Bluetooth name “Touch@Lofree” to connect.
     Note: After the Bluetooth connection is successful, the Bluetooth symbol on the display screen will be displayed normally.

3. 2.4G Connection Mode

   • Turn the bottom switch of the mouse to the “ON” position.
   • Observe the display screen and press the mode switch button to switch the mode to 2.4G connection mode.
   • Remove the 2.4G receiver from the bottom storage of the mouse.
   • Plug the 2.4G receiver into the USB port of the corresponding device to use it.

4. DPI Normal Mode
   After the mouse is successfully connected to the device, pressthe button to light up the screen, and then press the DPI key to adjust the DPI.
   Note:
   In the screen state, pressthe DPI key for the first time to light up the screen, and the current mouse state can be displayed. If there Is no other operation, the screen will be off after 1 minute.

5. DPI Custom Mode

   • After the mouse is connected to the device, long press the DPI key for 3S to enter the DPI custom mode.
   • After entering DPI custom mode, scroll forward to increase DPI and scroll backward to decrease DPI.
   • When the appropriate DPI value is found, press the middle key of the roller to confirm.
     Note:
     In the custom mode, a small wrench icon appears in the lower-left corner of the screen, and the forward and backward rolling is fine-tuned by 200 units.

6. Sleep and Wake Modes

   • When the product is not operated, it will enter the first level of hibernation in 5 seconds and the second level of hibernation in 1 minute, then it can be woken up by moving the mouse or pressing the button.
   • After 10 minutes without operation, the product enters the third level of hibernation and needs to be woken up by pressing the key.

7. Power Indicator and Charging

   • After the mouse is turned on, short press the DPI button to light up the screen, and you can observe the power situation, If the power icon blinks that is an indication of low power.
   • You can charge this device by connecting it to the Type-C cable included.

8. Install Left and Right Buttons

   • The left and right buttons of this mouse support disassembly.

Note: Keypuller is purchased separately.

TOUCH PBT Wireless Mouse Hazardous Substance Statement

The classification and marking of this product were performed per the EU directive 2011/65/EU and the revised directive.

• O: Indicates that the said hazardous substance contained in all the homogeneous materials forth is component is below the limit requirement in GB/T 26572
• X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Warning

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>