Lofree LOFLICK Series LOFLICK68 68-Triple Mode Connection Mechanical Keyboard User Guide
- June 5, 2024
- Lofree
Table of Contents
Lofree LOFLICK Series LOFLICK68 68-Triple Mode Connection Mechanical Keyboard
SPECIFICATIONS
Number of keys: 68 (hot-swappable Mechanical Switch)
Number of Multimedia Keys: 12
Materials: ABS Body, PBT Keycaps
Interface: Type-C
Mode: 2.4G & Bluetooth & Wired
Device Name: Loflick68@Lofree
Dimensions: 310ml09mm5L5mm
FEATURE DESCRIPTION
-
Battery Indicator
• Wired Mode
The indicator light is steady white.
Bluetooth Mode/2.4G Wireless USB mode.
When the power is lower than 20%, the indicator light flashes slowly in red;
When the power is lower than 3%, the indica tor light flashes quickly then automatically turn off; -
Status indicator (white light)
• Caps Lock Indicator
Solid LED light= The uppercase mode is t urned on;
LED light off= The uppercase mode is turned off;
• Bluetooth Pairing lndicator(white light)
Flashing LED light= The device is in Bluetooth pairing mode;
When successfully paired, the Pairing Indicator turns on for 3 seconds, and then turns off again;
During each switch to a new device, the Pairing Indicator flashes quickly for 3 seconds, and then tu rns off again
• 2.4G Wireless USB Pairing Indicator
VVhen the 2.4G receiver is started for pairing, the Pairing indicator flashes quickly for 3 seconds
When successfully paired, the Pairing Indicator turns on for 3 seconds, and then turns off again. -
Status switch
2.4G/BT:
2.4G / Bluetooth mode/ ON: Wired mode/ OFF: Off -
Type-C interface
Wired mode interface. -
Battery cover
-
minifigure holder
Detailed user guide
2.4G Wireless USB mode
-
Swipe to the right to remove the battery cover.
-
Take out the 2.4G receiver.
-
Install the battery cover.
-
Insert the 2.4G receiver into the USB port of the computer.
Note: MAC/10S system devices do not support multimedia functions under 2.4G USB connection. -
Switch the status to 2.4G/BT gear.
-
Press and hold Fn+R to start 2.4G connection mode.
-
The status indicator flashes quickly for 3 seconds then paired successfully.
-
Th is light turns on for 3 seconds then turns off again.
Bluetooth mode
-
Switch the status to 2.4G/BT gear.
-
Long press Fn+Q/ Fn+W/ Fn+E until the status indicator flashes slowly.
-
Turn on the Bluetooth function of your device, search for “Loflick68@Lofree” and connect.
-
When successfully pa ired, the Pairing Indicator turns on for 3 seconds, and then turns off again.
-
Short press Fn+Q/ Fn+W/ Fn+E to switch Bluetooth connected devices.
Wired mode
-
Switch the status to the ON.
-
Connect the keyboard to computer with Type-C cable to complete the wired connection.
System Switch
Fn+N in the
upper right corner is the key to trigger the corresponding system function of
windows.
Fn+M in the upper right corner is the key to trigger the corresponding system
function of Mac.
Multimedia and function keys
Fn+l in the
lower left corner … = the function keys.
Fn+l in the
upper left corner … = the multimedia keys.
Note: Mu ltimed ia key FN+5°/o/FN+6A: Some models of Mac system devices may not support the triggering of this multimedia key due to the problem of matching the connected device model and system vers ion.
NAME AND CONTENT OF HAZARDOUS SUBSTANCES IN PRODUCT
Harmful Elements
|
Hazardous substances
---|---
Lead (Pb )
|
Mercury (Hg)
|
Cadmium (Cd)
|
Hexavalent Chromium (Cr, VI)
|
Polybrominated Biphenyls (PBB)
|
Polybrominated Diphenyl Ethers (PBDE)
Plastic Components
|
O
| O| O| O| O|
O
Circuit Board Assembly
Silicone Components
|
O
| O| O| O| O|
O
Spare Partss
|
O
| O| O| O| O|
O
This table is prepared in accordance \Nith the provisions of SJ/T11364.
The classification and marking of this product vvas performed in accordance
with the EU directive 2011/65/EU and the revised directive 2015/863/EU.
O: Indicates that the said hazardous substance contained in all the
homogeneous materials for this component is below the limit requirement in
GB/T 26572.
X: Indicates that this hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
GB/T 26572.
ENVIRONMENTAL PROTECTION INSTRUCTIONS:
The hazardous substances contained in the electronic parts of this product
will not leak or change under normal use conditions for a period often years.
During the same period, the electronic components of this product witl not
cause serious environmental pollution orserious. damage to human health or
property white the products are being used by the consumer.
According to the Chinese electronic industry standard SJ/T11364-2014 and
retated Chinese government regulations, this product and some of its internal
or external components may have an environmentally friendly use period mark,
depending on the component and component manufacturer, the mark lifespan on
the product and its components may vary. The expiration date on the component
takes precedence over any conflicted or different UFUP [abelson the product.
Warning
- If the battery is not replaced properly, there may be leakage or explosion and personal injury hazards.
- Do not use the battery when there is leakage, discoloration, deformation, or any other abnormality.
- Do not leave the battery in a discharged or unused state for a long time.
- Do not short-circuit the product
- Battery life varies with usage. Used batteries should be disposed of in accordance with local laws or thrown away in trash cans for recycling electronic devices.
- If any liquid accidentally enters the product, please immediately disconnect the power supply and remove the product. Continue to use the product may cause fire or electric shock. Please contact the agent or the nearest customer service center for inspection and maintenance.
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try correct the interference by one or more of the
following measures:
– Reorient the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into and outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the foll ovving tvvo conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, inclu ding in terference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Shenzhen Lofree Culture Co.,Ltd.
202-F8, F518 Idea Land, 1065 Bao Yuan Road, Shenzhen
Service Hotline
4006002083
www.lofree.com.cn
www.lofree.co
lofree.co
lofreeco
lofree.co
–