strand ST64511101 Acclaim LED Fresnel User Manual

strand Acclaim LED Zomm Spot

INTRODUCTION

OUR GOAL
We are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Strand customer.

TECHNICAL SUPPORT
Our Service and Support team is tasked with online and field support, repair, demo, commissioning, mainte-nance contracts, and technical training for fixtures and systems. In addition, this team plays a large role in a Systems sales, responsible for administering final commissioning, record-keeping, and organizing services. Refer to the back cover of this User Manual for contacts in your region or visit www.strandlighting.com/support

CUSTOMER SERVICE
Customer Service is responsible for boxed goods and spare parts quotations, order entry and fulfilment, project delivery, lead times, and general account management. They also manage all after sales warranty fulfilment, RGA, and repairs invoicing in tandem with our After Sales Service & Support team. Visit our website to find a customer service agent in your region.

ADDITIONAL DOCUMENTATION
Additional product documentation, including DMX maps, software, and photometric reports, are available for download on our website. For more information on installing DMX512 control systems, the following publication is available for purchase from the United States Institute for Theatre Technology (USITT), “Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition” (ISBN: 9780955703522).

USITT Contact Information:

MITT 315 South Crouse Avenue, Suite 200 Syracuse, New York 13210-1844 USA Phone: 800-938-7488 or +1-315-463-6463 Fax: 866-398-7488 or +1-315-463-6525 Website: www.usitt.org

ABOUT THIS DOCUMENT

Read all instructions before installing or using this product. Retain this User Manual for future reference. Additional product information and descriptions may be found on the product data sheet(s) which can be downloaded from the Strand website at www.strandlighting.com. This User Manual provides necessary information regarding safety, installation, operation and routine mainte-nance for Strand VL2600 Series. Familiarizing yourself with this information will help you to get the most out of your product.

WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.

SAFETY WARNINGS AND NOTICES

Read this user manual in full before attempting to install, operate or maintain the fi xture to which it relates. This user manual is intended to provide general guidance to such suitably qualifi ed personnel. Installation and opera-tion of the fi xture are to be performed by qualifi ed personnel only. When using electrical equipment, basic safety precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

• For indoor, dry location use only. Do not use outdoors unless fi xture is suitably IP rated.

• Use safety tether when mounting.

• Equipment should be mounted in locations and at heights where it will not be readily subjected to tampering by unauthorized personnel.

• Not for residential use. Do not use this equipment for other than intended use.

• Note distance requirement(s) from combustible materials or illuminated objects. Do not mount near gas or electric heaters.

• Install only in locations with adequate ventilation. Ensure sure that ventilation slots are not blocked.

• Ensure that the voltage and frequency of the power supply match the power requirements of the
  fi xture.

•  The fi xture must be earthed/grounded to the appropriate conductor.

• Do not operate fi xture outside the specifi ed ambient temperature range.

• Do not connect the fi xture to any dimmer pack.

• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition and void warranty.

• Refer service to qualifi ed personnel. This fi xture contains no user serviceable parts.

• Prior to fi rst use, carefully inspect fi xture to ensure no damage has occurred during shipping.

• Materials used in the manufacturing process can cause strong odors when the product is new. These odors dissipate over time.

• Prior to each use, carefully inspect power cables and replace any damaged cables.

• Exterior surfaces of the luminaire will be hot during operation. Take appropriate precautions.

• Continuous use of the fi xture may shorten the lifespan. Power down the fi xture when not in use.

• Do not cycle power on and off repeatedly. Disconnect mains power if the fi xture is not used for an extended period.

• Clean fi xtures regularly, particularly when working in a dusty environment.

• Never touch power cables or wires while the fi xture is powered on.

• Avoid entangling power wires with other cables.

• In the event of a serious operating problem, immediately discontinue using the fi xture.

• It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their eff ectiveness is impaired, for example, by cracks or deep scratches.

• Original packing materials can be reused for transporting the fi xture.

• Do not look directly at the LED light beam while the fi xture is on.

• This is a Class A product. In a domestic environment this product may cause radio interference, in which case, the user may be required to take adequate measures.

• The light source contained in this luminaire shall only be replaced by the manufacturer or service agent or similarly qualifi ed person.

SAVE THESE INSTRUCTIONS.

WARNING: Refer to National Electrical Code® and local codes for cable specifi cations. Failure to use proper cable can result in damage to equipment or danger to personnel.
CAUTION! Do not stare into the beam. This fi xture is categorized as Risk Group 2 (RG2).

HOW TO OBTAIN WARRANTY SERVICE

A copy of the Limited Warranty card was included in the shipping package for this product. To obtain warranty service, please contact customer service at 1-214-647-7880, or entertainment.service@ signify.com and request a Return Material Authorization (RMA) for warranty service. You will need to provide the model and serial number of the item being returned, a description of the problem or failure and the name of the registered user or organization. If available, you should have your sales invoice to establish the date of sale as the beginning of the warranty period. Once you obtain the RMA, pack the unit in a secure shipping container or in its original packing box. Be sure to clearly indicate the RMA number on all packing lists, correspondence, and ship-ping labels. If available, please include a copy of your invoice (as proof of purchase) in the shipping container. With the RMA number written legibly on or near the shipping address label, return the unit, freight prepaid, to:

• Vari-Lite Strand
• Attention: Warranty Service (RMA# ____) 10911 Petal Street
• Dallas, Texas 75238
• USA
  As stated in the warranty, it is required that the shipment be insured and FOB our service center.

IMPORTANT! When returning products to Vari-Lite Strand for repairs (warranty or out-of-warranty) from a country other than the USA, “Vari-Lite LLC”, must appear in the address block as the Importer of Record (IOR) on all shipping documentation, Commercial Invoices, etc. This must be done in order to clear customs in a timely manner and prevent returns.

DESCRIPTION

FEATURES

• FEATURES AND BENEFITS
• 500W/650W-equivalent LED Fresnel – true Fresnel with superior control and light quality than comparable Par fi xtures
• Built with the DNA of Strand – cost-eff ective luminaire from the original name in theatrical lighting
• Integrated 10° to 50° manual zoom – precise beam sizing with minimal light scatter
• Optional rotating 4-leaf barn doors – shape the beam to focus light where you need it
• Custom LED light source and RGBL color mixing system – consistent output and color mixing with the entire acclaim leD series
• Available in black or white – the perfect body color for your application
  Download the product datasheet from the Strand website at www.strandlighting.com for the full technical
  specifications.

COMPONENTS

The document provides installation and operation instructions for the following product

• every strand product is fresnal

Read all instructions before installing or using this product. Retain this manual for future reference. Additional product information and descriptions may be found on the product specification sheet

INCLUDED ITEMS
Each Strand Acclaim LED Fresnel luminaire includes the following items:

• Strand Acclaim LED Fresnel
• Quick Start Guide

INSTALLATION

MOUNTING
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is fi rmly fi xed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Always use a safety cable that can hold up to 12 times the weight of the unit when installing the fi xture. The luminaire must be mounted by professionals.

GOBO HOLDER INSTALLATION

To install the gobo holder:

• Step 1. Loosen the two screws at A and move the shading plate backward. Tighten the two screws to fix it.
• Step 2. Snap the gobo holder into the luminaire.

IRIS INSTALLATION

To install the iris:

• Step 1. Loosen the two screws at A and move the shading plate backward. Tighten the two screws.
• Step 2. Snap the iris into the luminaire as shown.

COLOR FILTER INSTALLATION

To install the color filter:

• Step 1. Attach the accessory holder to the luminaire as shown. Align the screw holes and tighten the four screws at A.
• Step 2. Open the activity claw. Snap the color filter into the accessory holder and then close the activity claw.

ZOOM AND FOCUS ADJUSTMENT

To adjust the zoom and focus:

• Step 1. Loosen the focus or the zoom locking bolt counter-clockwise.
• Step 2. Slide the focus or the zoom locking bolt forward or backward to achieve the desired focus/zoom edge.
• Step 3. Once the luminaire is focused or zoomed, tighten the locking bolt clockwise..

CONNECTING DATA AND POWER

• A maximum of 32 luminaires may be connected in any one DMX data link.
• A maximum of 9 luminaires may be connected in 120V, 60Hz.
• A maximum of 16 luminaires may be connected in 230V, 50Hz.

NOTE: This maximum limit applies to the luminaire “daisy chain” only. Your system or console may require few-er luminaires on a single data link path. Consult your console documentation for more information.

To connect power and data:

• Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
• Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN connectors of remaining luminaires in link.
• Step 3. At last luminaire in link, install male termination connector at DATA THRU connector. (Luminaires and other devices on the same DMX chain may not function properly without termination.)
• Step 4. Connect AC Input Cable connector to power input source.
• Step 5. Dress AC input and data cables and secure them so that they will not interfere with luminaire head and yoke movement

MENU OPERATION

CONTROL PANEL

1. LCD display – shows menu and selected function
2. Buttons:
   • MenU – to select programming functions
   • DOWn – to go forward in selected functions
   • UP – to go backward in selected functions
   • enTer – to confi rm the selected function
3. POWer In – connects to power supply
4. POWer OUT – connects to next fi xture
5. DMX In – 5-pin Xlr cable to link the DMX console
6. DMX OUT – 5-pin Xlr cable to link next fi xture

Press the MENU button to select any functions, until the required function is shown in the display. Select the desired function by pressing ENTER, which will cause the display to blink. Use the UP and DOWN button to change the mode. Once the required mode has been selected, press the ENTER button to accept the selection, otherwise after a period of one minute wait, the the menu will return automatically to the main functions, without any changes having been made. Return to the main functions without making any changes by pressing the MENU button.

SHORTCUT KEYS

BUTTON

COMBINATION

| FUNCTION
MenU + enTer| Factory defaults
enTer + UP| Turns the fixture on at full output
enTer + DOWn| Toggles through standard, studio, and Whisper modes
UP + DOWn| Inverts display

Acclaim LED Zoomspot

DMX MENU

Choose DMX, press the ENTER button to confirm, use the UP/DOWN button to choose from options listed.

ADDRESS
Choose Address, press the ENTER button to confirm. Use the UP/DOWN button to select range of values. Press the ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit.

DMX MODE
Choose DMX Mode, press the ENTER button to confirm. Use the UP/DOWN button to select mode. Press the ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit.

DATA
Choose Data, press the ENTER button to confirm. Use the UP/DOWN button to select option. Choose Ch1 –Intensity xxx(value), Ch2 – Intensity Fine xxx(Value), …. All functions, press the ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit menu mode.

DMX FAIL
To select DMX Fail, press the ENTER button to confirm. Use the UP/DOWN button to select DMX Hold or Blackout, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

MANUAL MENU

To select Manual, press the ENTER button to confirm, use the UP/DOWN button to select Red, Green, Blue and Lime. Use the UP/DOWN button to adjust the value from 0 to 255, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SETTINGS MENU

Choose Settings, press the ENTER button to confirm, use the UP/DOWN button to choose from options shown on screen.

LED
Choose LED, press the ENTER button to confirm. Use the UP/DOWN button to select an option. Press the EN-TER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit menu mode.

DIMMING CURVE
To Choose Dimming Curve, press the ENTER button to confirm. Use the UP/DOWN button to Choose Square Law Curve, S Law Curve or Linear Law Curve, press the ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit menu mode.

OUTPUT MODE
Choose Output Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Standard, Studio, or Whisper. Press the MENU button to return to previous menu.

COLOR CALIBRATION
Choose Color Cal, press the ENTER button to confirm. Use the UP/DOWN button to Choose ON or OFF. Press the MENU button to return to previous menu.

FAN MODE
Select Fan Mode, press the ENTER button to confirm. Use the UP/DOWN button to select On or Auto, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

REFRESH RATE
Select Refresh Rate, press the ENTER button to confirm. Use the UP/DOWN button to select 500Hz, 1000Hz, 1500Hz, 2000Hz, 2500Hz, 3000Hz, 3500Hz, 4000Hz, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DISPLAY ON TIME
To select Display On Time, press the ENTER button to confirm. Use the UP/DOWN button to select Auto(30 sec-onds since last press) or On, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

RESET DEFAULTS
To select Reset Defaults, press the ENTER button to confirm, Are You Sure? will show on the display, press the EN- TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SERVICE

SERVICE MENU
To select Service, press the ENTER button to confirm, use the UP/DOWN button to select Status, Diagnostics, Version, Fixture Hours, Crossload(Software) and Password(2606).

STATUS
To select Status, press the ENTER button to confirm, No Errors or a list of errors will show on the display, press the MENU button back to exit.

DIAGNOSTICS
To select Diagnostics, press the ENTER button to confirm. Use the UP/DOWN button to select Fan Check or Temp, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

VERSION
To select Version, press the ENTER button to confirm, Version will show on the display, press the MENU button back to exit.

FIXTURE HOURS
To select Fixture Hours, press the ENTER button to confirm, Fixture Hours will show on the display, press the MENU button back to exit.

CROSSROAD(SOFTWARE)
Select Crossload(Software), press the ENTER button to confirm, Are You Sure? will show on the display, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

NOTE: Incoming DMX must be removed from the fixture or software crossload will not be activated.

PASSWORD
Select Password(2606), press the ENTER button to confirm. Use the UP/DOWN button to select White Balance or Change Mode, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

WHITE BALANCE
To select White Balance, press the ENTER button to confirm. Use the UP/DOWN button to select Red, Green, Blue, Lime or Reset to Defaults (Reset to White Balance), press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

CHANGE MODE
To select Change Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Zoomspot, PLE, Fresnel or Cyc, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DMX MAPPING

The fixture can be operated by DMX controller. The following tables assumes a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in se-quence.

TABLE 1. 8-BIT MODE (DEFAULT)

TABLE 2. 16-BIT MODE

DMX              PARAMETER              DEFAULTS          RANGE DMX DESCRIPTION CHANNEL

1| Intensity (16-bit high)| 0| 0 – 255| 16-bit intensity (dimmer) control
2| Intensity (16-bit low)| 0| 0 – 65535| Open

3

| ****

strobe

| ****

0

| 0

1 – 255

| Open

strobe speed slow>>>>>>>>>>>>>>>>>>>Fast

4| red (16-bit high)| 255| 0 – 255

(16-bit)

| ****

red leD output level

5| red (16-bit low)| 65535| 0 – 65535

(16-bit)

6| Green (16-bit high)| 255| 0 – 255

(16-bit)

| ****

Green leD output level

7| Green (16-bit low)| 65535| 0 – 65535

(16-bit)

8| Blue (16-bit high)| 255| 0 – 255

(16-bit)

| ****

Blue leD output level

9| Blue (16-bit low)| 65535| 0 – 65535

(16-bit)

10| lime (16-bit high)| 255| 0 – 255

(16-bit)

| ****

lime leD output level

11| lime (16-bit low)| 65535| 0 – 65535

(16-bit)

COLOR PRESET

RDM PARAMETER IDs

Remote Device Management (RDM) is a protocol enhancement to USITT DMX512 that allows bi-directional com-munication between a lighting or system controller and attached RDM compliant devices over a standard DMX line. This protocol will allow configuration, status monitoring, and management of these devices in such a way that does not disturb the normal operation of standard DMX512 devices that do not recognize the RDM protocol.

ACCLAIM LED ZOOMSPOT RDM PRODUCT PARAMETER IDS

Model ID| Manufacturer| Vendor ID| Model Description| Product Category
0x0014| strand| 0x736C| acclaim leD Zoomspot| 0x0101

The table on the following pages outlines and describes all the RDM parameters IDs associated with the Acclaim LED Zoomspot.

ACCLAIM LED ZOOMSPOT

GET ALLOWED

|

SET ALLOWED

|

RDM PARAMETER IDS

|

VALUE

|

COMMENT

|

ESTA STANDARD

|

REQUIRED / IMPLEMENTED

|

DMX / UI DESCIPTION

---|---|---|---|---|---|---|---
Category – network Management
| | DIsC_UnIQUe_BranCH| 0x0001| | X| X|
| | DIsC_MUTe| 0x0002| | X| X|
| | DIsC_Un_MUTe| 0x0003| | X| X|
X| | PrOXIeD_DeVICes| 0x0010| | | |
X| | PrOXIeD_DeVICes_COUnT| 0x0011| | | |
X| X| COMMs_sTaTUs| 0x0015| | | |
Category – status Collection
X| | QUeUeD_MessaGe| 0x0020| | | |
X| | sTaTUs_MessaGes| 0x0030| | | X| status
X| | sTaTUs_ID_DesCrIPTIOn| 0x0031| | | X|
| X| Clear_sTaTUs_ID| 0x0032| | | |
X| X| sUB_DeVICe_sTaTUs_rePOrT_THresHOlD| 0x0033| | | |
Category – rDM Information
X| | sUPPOrTeD_ParaMeTers| 0x0050| | X| X|
X| | ParaMeTer_DesCrIPTIOn| 0x0051| | X| X|
Category – Product Information
X| | DeVICe_InFO| 0x0060| | X| X|
X| | PrODUCT_DeTaIl_ID_lIsT| 0x0070| | | |
X| | DeVICe_MODel_DesCrIPTIOn| 0x0080| | | X|
X| | ManUFaCTUrer_laBel| 0x0081| | | X|
X| X| DeVICe_laBel| 0x0082| | | X|
X| X| FaCTOrY_DeFaUlTs| 0x0090| | | X| reset Defaults
X| | lanGUaGe_CaPaBIlITIes| 0x00a0| | | |
X| X| lanGUaGe| 0x00B0| | | |
X| | sOFTWare_VersIOn_laBel| 0x00C0| | X| X| Version
X| | BOOT_sOFTWare_VersIOn_ID| 0x00C1| | | |
X| | BOOT_sOFTWare_VersIOn_laBel| 0x00C2| | | |

GET ALLOWED

|

SET ALLOWED

|

RDM PARAMETER IDS

|

VALUE

|

COMMENT

|

ESTA STANDARD

|

REQUIRED / IMPLEMENTED

|

DMX / UI DESCIPTION

---|---|---|---|---|---|---|---
Category – Control 0x10xx
X| X| IDenTIFY_DeVICe| 0x1000| | X| X|
| X| reseT_DeVICe| 0x1001| | | X|
X| X| POWer_sTaTe| 0x1010| | | |
X| X| PerFOrM_selFTesT| 0x1020| all Test, Pan/Tilt, encoder| | |
X| | selF_TesT_DesCrIPTIOn| 0x1021| | | |
| X| CaPTUre PreseT| 0x1030| see e1-20_2010a| | |
X| X| PreseT PlaYBaCK| 0x1031| Table a-7 defines| | |
| | esTa reserved Future rDM| 0x7Fe0-

0x7FFF

| | | |
| | Manufacturer-specific PIDs| 0x8000-

0xFFDF

| | | |

X

|

X

|

Output Power Mode

|

0x8a97

| Value range depends on options (standard, studio, etc)| |

X

| leD Output Mode
X| X| Pan/Tilt Feedback (On/Off)| 0x8aD3| | | |
X| X| Display On Time| 0x8aa0| Value range depends on options| | X| Display On Time
X| X| leD Dimmer Curve| 0x8aa1| Value range depends on options| | | leD Dimming Curve
X| X| Pan Tilt Movement (On/Off)| 0x8aa2| | | |
X| X| Head Motor Movement (On/Off)| 0x8aa3| | | |
X| X| auto shutdown Mode| 0x8aa4| Value range depends on options| | |
X| X| leD Hours| 0x8aa5| | | |
X| X| Dim snap (On/Off)| 0x8aa6| | | |
X| X| Color snap (On/Off)| 0x8aa7| | | |
X| X| auto Fan Mode (On/Off)| 0x8aa8| | | | leD Fan Mode
X| X| Gamma shift| 0x8aa9| Value range depends on options| | |
X| X| Tungsten Dimming (On/Off)| 0x8aa10| | | |
X| X| CTB Correction (On/Off)| 0x8aa11| | | |

GET ALLOWED

|

SET ALLOWED

|

RDM PARAMETER IDS

|

VALUE

|

COMMENT

|

ESTA STANDARD

|

REQUIRED / IMPLEMENTED

|

DMX / UI DESCIPTION

---|---|---|---|---|---|---|---
Category – Control 0x10xx (continued)
X| X| leD refresh rate| 0x8aa12| Value range depends on options| | | leD refresh rate
X| X| side Hang (On/Off)| 0x8aa13| | | |
X| X| Focus Track (On/Off)| 0x8aa14| | | |
| X| Control signel select DMX only/artneT (On/Off)| 0x8aa15| | | |
| X| recalibrate Fixture (level)| 0x8aa16| different levels (all, position, color, etc)| | |
X| X| DMX Fail (Hold, Blackout, GOTO Preset)| 0x8aa17| | | | DMX Fail
X| X| artnet Universe| 0x8aa18| | | |
X| X| artnet net| 0x8aa19| | | |
X| X| artnet sub-net| 0x8aa20| | | |
X| X| artnet ethernet IP| 0x8aa21| | | |
X| X| artnet ethernet sub-net Mask| 0x8aa22| | | |
X| X| Manual PreseT Playback Power Up Preset| 0x8aa23| | | |
X| X| Manual PreseT Playback Preset Intensity| 0x8aa24| | | |
X| X| Manual PreseT Playback Priority| 0x8aa25| | | |
X| X| Manual PreseT Playback Power Up?| 0x8aa26| | | |
X| X| leD Color Calibration (On/Off)| 0x8aa27| | | X| leD Color Calibration

TROUBLeSHOOTinG

The following are a few common problems that may occur during operation

The unit does not work; light and fan do not turn on

• Check the connection of power and main fuse.
• Measure the mains voltage on the main connector.

Not responding to DMX controller

• Check DMX connectors, cables to see if link properly.
• Check the address settings and DMX polarity.
• If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit or the previous one.
• Try to use another DMX controller.
• Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.

CLeAninG

The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fi xture operates damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the fi xture’s optics.

• Clean with soft cloth using normal glass cleaning fl uid.
• Always dry the parts carefully.
• Clean the external optics at least every 30 days.

FAN SPEED AND CONTROL

All Vari-lite and Strand lighting luminaires are governed by the same fan speed versus noise levels and maximum power output rules as detailed below. The noise related to these levels conforms to noise criteria levels detailed within the document.
There are three control parameters that can can be selected separately or in conjunction when permitted to manage fan speed versus noise levels and maximum power output.

NOTE: Not all fi xture have all modes or functions. Refer to DMX map and/or user interface menu tree to verify the modes and functions in your fi xture.

FAN VERSUS OUTPUT PRESET MODES
These modes are selectable at either/or the fi fixtures DMX control chan-nel or via the fi xture user interface screen. Boost mode – LED output boosted to

120% of standard output fan speeds increased manage heat level of LED (may be limited to  only run for hrs). The fixture will not exceed NC45 – NC55 sound levels in this mode Standard mode – Full LED Output + Fan Spin at top speed (loudest set-ting). Fixture will not exceed NC40 sound levels in this mode. Studio mode – Fan speed reduced to the appropriate amount to reduce dB levels 10% of full speed + LED @ max output approximately 80% of Standard output at appropriate level to ensure LED work at optimum temperature and output effi ciency (fan speed remains at a constant speed and do not ramp up or down) NC35. Whisper mode – Fan speed reduced to the appropriate amount to reduce dB levels to >30% of the full speed + LED Max out-put approximately 60% of Standard output at appropriate level to ensure LED work at optimum temperature and output effi ciency (Fan speed remains at a constant speed and do not ramp up or down) NC25. Silent mode – ideally Fans do not spin + output capped at appropriate level to ensure LED work at optimum temperature and output efficiency (Fan should never switch on in this mode or change speed if they on) NC15 target level.

SOUnd pReSSURe LeVeLS (dB)
NC-15| 47| 36| 29| 22| 17| 14| 12| 11
NC-20| 51| 40| 33| 26| 22| 19| 17| 16
NC-25| 54| 44| 37| 31| 27| 24| 22| 21
NC-30| 57| 48| 41| 35| 31| 29| 28| 27
NC-35| 60| 52| 45| 40| 36| 34| 33| 32
NC-40| 64| 56| 50| 45| 41| 39| 38| 37
NC-45| 67| 60| 54| 49| 46| 44| 43| 42
NC-50| 71| 64| 58| 54| 51| 49| 48| 47
NC-55| 74| 67| 62| 58| 56| 54| 53| 52
NC-60| 77| 71| 67| 63| 61| 59| 58| 57
NC-65| 80| 75| 71| 68| 66| 64| 63| 62
NC-70| 83| 79| 75| 72| 71| 70| 69| 68

TECHNICAL SUPPORT

GLOBAL 24HR TECHNICAL SUPPORT:
Call: +1 214 647 7880
[email protected]

NORTH AMERICA SUPPORT:
Call: 800-4-STRAND (800-478-7263)
[email protected]

EUROPEAN CUSTOMER SERVICE CENTER:
Call: +31 (0) 543 542 531
[email protected]

©2021 Signify Holding. All rights reserved.
All trademarks are owned by Signify Holding or their respective owners. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial off er and does not form part of any quotation or contract, unless otherwise agreed by Signify. Data subject to change. WWW.STRANDLIGHTING.COM

COMPLIANCE NOTICE

FCC DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Vari-Lite Strand system, service, and safety guidelines, may cause harmful interference to radio communications. As tested under this standard:

*FCC 47CFR 15B clACEI**
Issued:2009/10/01 Title 47 CFR Part 15 Subpart B Unintentional Radiators Class A Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

EU DECLARATION OF CONFORMITY
We, Vari-Lite LLC., 10911 Petal Street, Dallas, Texas 75238, declare under our responsibility for the products contained herein are in conformity with the essential requirements of the following European Directives and harmonized standards:

Low Voltage Director (LVD), 2006/95/EC
EN 60589-2-17:1984+A1:1987+A2:1990 used in conjunction with 60598-1:2008/A11:2009

Electromagnetic Compatibility Directive (EMC), 2004//108/EC
EN 55022:2010, EN55024:2010

References

• Home | Vari-Lite
• Warranty | Vari-Lite
• Support/Training | Vari-Lite

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>