PROZIS Kymo Wireless Mouse User Manual

June 6, 2024
PROZIS

PROZIS Kymo Wireless Mouse

OVERVIEW

Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.
NOTE: The most recent version of this product’s user manual can be found at www.prozis.com

Legal compliance statement

By means of this document, PROZIS declares that the Prozis KYMO – Wireless Mouse – is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses.

Prozis will always be available for any additional clarification through our customer support communication channels, available at www.prozis.com/support

  • To avoid any impact on the environment or human health due to dangerous substances present in electrical and electronic devices, the end-users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of electrical and electronic equipment along with the unsorted household waste. Dispose of it separately and properly instead.
  • Used batteries should not be disposed of along with the household waste. They must be placed in a special container for used batteries. This is an obligation intended to ensure the ecological disposal of batteries. Dispose of them only when they are empty.
  • The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins.
  • FCC ID: 2AJYO-V8
    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety warnings

DANGER! This symbol, when combined with the note Danger, means high risk. Failure to observe this warning may lead to injury to life and limb.

DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

  •  Packing materials are not toys. Children must not play with the packaging materials. There is a suffocation risk.
  •  This product is not intended for use by people (including children) with physical, sensory or mental impairments or lacking experience and knowledge, unless when they are super-vised or instructed in the safe use of the product.
  •  Children must not play with the device.
  •  Cleaning and maintenance must not be performed by children without supervision.
  •  Keep the device out of the reach of children.

CAUTION!
This symbol highlights dangerous situations which could lead to minor to moderate injuries, damage, malfunction, and/or destruction of the device.

To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

CAUTION! RISK OF PROPERTY DAMAGE

  •  Check the product before each use!
  •  None of the parts in this product can be serviced by the user.
  •  Do not place burning candles or other open flame sources on or next to the product.
  •  In case of smoke or an unusual noise or odor, disconnect the USB connection immediately.
  •  Sudden temperature changes may cause condensation inside the product. Allow the prod-uct to adjust for a while before using it again so as to prevent short circuits.
  •  Do not operate the device near heat sources, such as radiators or any other heat-emitting devices.
  •  Do not throw the product into fire or expose it to high temperatures.
  •  Never open the product. It has no internal parts that require maintenance.

ATTENTION!

  • Make sure no direct heat sources can affect the product.
  • Make sure to avoid any contact with splashing and dripping water and corrosive liquids. The device should never be submerged in liquid; do not place any vessels filled with liquid, like vases or drinks, on or near the product.
  •  Make sure the product is not used in the immediate vicinity of magnetic fields (e.g. speak-ers).
  •  Make sure no fire sources (e.g. burning candles) are placed on or near the product.
  •  Make sure no foreign objects penetrate the device.
  •  Make sure the product is never subjected to excessive shock or vibration.

CAUTION! Handling batteries.

  •  Risk of explosion!
  •  Observe the plus (+) and minus (-) polarity symbols.
  •  Do not throw batteries into a fire.
  •  If your skin or eyes come into contact with battery fluid, rinse the affected area with water and seek medical assistance.
  •  Choking hazard! Small children may swallow and choke on batteries. Therefore, store batteries out of the reach of small children.
  •  If a battery has leaked, put on protective gloves and clean the battery compartment with a dry cloth. Protect batteries from excessive heat.
  •  Risk of explosion! Do not throw batteries into a fire.
  •  Do not charge or short-circuit batteries.
  •  If the device is not to be used for a relatively long period of time, take the batteries out of the battery compartment.
  •  Never open batteries and never solder or weld batteries. There is a risk of explosion and injury!

PACKAGE CONTENT

  •  1 x Kymo wireless mouse
  •  1 x AA battery
  •  1 x USB receiver
  •  1 x Quick guide

PRODUCT OVERVIEW

PROZIS-Kymo-Wireles-Mouse-FIG-2

  1.  Left button
  2.  Right button
  3.  Scroll wheel
  4.  Battery compartment
  5.  USB receiver
  6.  Engine: IR (without light)

Maintenance and cleaning

Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel wool. They can damage the upper surface of the product! Only use a clean, dry cloth for cleaning the product and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to remove any stubborn dirt. Use glass cleaner to lightly moisten a soft, lint- free cloth and gently wipe the mouse’s lens. Make sure moisture does not enter the product while cleaning to prevent damage to the product and related repairs.

Storage
When no longer using the product, store it in a dry environment, protected from dust and direct sunlight. If the product is not going to be used for a long period of time, take the batteries out. Store your Mouse inside the original case provided.

INSTRUCTIONS

Mouse instructions:

PROZIS-Kymo-Wireles-Mouse-FIG-1

  1.  Open the battery cover on the mouse and install the battery properly.
  2. Please refer to the internal symbols on the mouse for the positive and negative poles. Before using the battery, tear off the insulating film.
  3.  Remove the 2.4 GHz receiver from the mouse’s battery compartment (USB receiver is plug and play)
  4.  Plug it into your computer’s USB port. The first time you use it, the computer will install the USB driver automatically. Wait about 15 ~ 60 seconds. The mouse can be used once the computer finds the receiver device (please note that the USB driver software is automatically installed and ready to use).

Troubleshooting

Some issues that arise may be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service.

PROBLEM CAUSE SOLUTION
Device is not working. The battery is empty. Change the battery.

Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-ered by the warranty applicable to the purchase and sale of consumer goods.

GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers. This warranty is valid exclusively for consumers who purchase the product for non-profession-al purposes.

WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective deliv-ery, or for longer if legally established by the applicable national law. In the event that repair is required, this 2-year period is suspended during repair time.

CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials or production.
HOW TO MAKE A

CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty. Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS
The following situations are not covered by this warranty:

  1.  Any wear and tear of parts and components resulting from normal product use.
  2.  Cracks, dents, scratches, and other types of superficial damage that only affect the prod-uct’s appearance.
  3.  Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
  4.  Use and storage of the product not complying with user manual instructions.
  5.  Opening of the product by a third party who is not authorized to proceed to its repair.
  6.  Altering or changing parts or components, whether internal or external.
  7.  Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
  8.  Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
  9.  Use of the product in the context of a business, occupation or commerce.
  10.  Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport and component costs. The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with or modified in any way.

LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.

WHAT TO DO?
To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:
PROZIS
Rua do Cais nº 198

CONTACTS

Prozis is always available for additional clarification through their customer service communication channel at www.prozis.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals