PARKSIDE PABS 20-Li E6 20V Cordless Drill Set Instructions

: June 6, 2024
: PARKSIDE

Table of Contents

PARKSIDE PABS 20-Li E6 20V Cordless Drill Set
General description
Overview
Technical data
Safety instructions
Operation
Cleaning and maintenance
Guarantee
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PARKSIDE PABS 20-Li E6 20V Cordless Drill Set

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Introduction
Congratulations on the purchase of your new device. With it, you have chosen a high quality product.
During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the prod-uct, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified. Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended purpose
The device is intended for drilling screws in and out and for drilling holes in wood, metal or plastic.
Any other use that is not explicitly ap-proved in these instructions may result in damage to the equipment and represent a serious danger to the user.
The user or operator is responsible for ac-cidents causing injury to other people or damage to property.
This equipment is not suitable for commer-cial use. Commercial use will invalidate the guarantee.
The device is part of the Parkside
X 20 V TEAM series and can be opera-ted using Parkside X 20 V TEAM series batteries. The batteries may only be charged using chargers from the Parkside X 20 V TEAM series.

General description

Extent of the delivery
Carefully unpack the appliance and check that it is complete:

Cordless Drill
8 Screw bits, length 50 mm: Cross recess: PH0, PH1, PH2
PZ0, PZ1, PZ2
Recess: SL5, SL6
8 drill bits: 1.5 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
Storage case
Instruction Manual

NOTE:

Battery and charger are not included.

Overview

Drill chuck aperture
Keyless drill chuck
Torque adjustment ring
Speed selector
Bit holder
Button for charge status display
Battery Indicator
Battery
Battery release button
LED working light
Direction of rotation switch
On/off switch
Drill bits
Screw bits
Storage case
Charger
Metal belt clip

Functional description
The cordless drill with two-speed gearing has a 25+1 level torque adjustment, left/right running, a removable keyless chuck and an LED working light. Please refer to the descriptions below for information on how the operating elements work.

Technical data

Cordless Drill Set ……. PABS 20-Li E6
Motor voltage U ……………………..20 V
Idling speed n0
1st gear ………………………. 0-400 min-1
2nd gear ……………………. 0-1400 min-1
Maximum torque ……………………..40 Nm
Span-chuck ………………………. 1.5-13 mm
Weight (without battery charger) .. 1.28 kg
Drilling capacity
for wood …………………….. max. 30 mm
for steel ……………………… max. 13 mm
Protection category………………………IPX0
Temperature………………………max. 50 °C
Charging process ……………….4 – 4 0 °C
Operation …………………….. -20 – 5 0 °C
Storage ……………………………0 – 4 5 °C
Sound pressure level
(LpA) ………………..72.1 dB(A), KpA= 5 dB
Sound power level
(LWA) ………………83.1 dB(A); KWA= 5 dB
Vibration (ah)
max. …………… <2,5 m/s2; K= 1,5 m/s2

Noise and vibration values have been determined according to the standards and regulations mentioned in the declaration of conformity.
The stated vibration emission value was measured in accordance with a standard testing procedure and may be used to compare one power tool to another.

The stated vibration emission value may also be used for a preliminary exposure assessment.

Warning: The vibration emission value may differ during actual use of the power tool from the stated value depending on the manner in which the power tool is used.
Try to keep the exposure to vibrations as low as possible.
An example of how to reduce vibration exposure is limiting the working hours. For this purpose all parts of the operating cycle have to be con-sidered (for example, times when the electric tool is switched off and times when it is switched on but running without any load).

Attention! An up-to-date list of battery compatibility can be found at:
www.lidl.de/akku

This device can only be operated with the following rechargeable batteries: PAP 20 A1, PAP 20 A2, PAP 20 A3, PAP 20 B1, PAP 20 B3.
This type of battery may only be charged with the following chargers: PLG 20 A1, PLG 20 A3, PDSLG 20 A1, PLG 20 A4.

Safety instructions

Ensure that the safety instructions are observed when operating the appliance.

Symbols on the drill set:

General Safety Directions for Power Tools

WARNING! Read all safety notices, instructions, illustrations and technical data that have been provided with this power tool. Omissions in the compliance with safety directions and instructions can cause electrical shock, fire and/or severe injuries.

Retain all safety directions and instructions for future use. The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool).

WORK AREA SAfETy

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable Iiquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAfETy

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodi-fied plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an in-creased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operation of the power tool in a damp environment is unavoidable, please use a residual current circuitry. The use of a residual current circuitry reduces the risk of an electric shock.

PERSONAL SAfETy

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention white operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the pow-er tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If dust extraction and collection devices can be installed, make sure that these are connected and used correctly. Use of dust collection can reduce dust-related hazards.
Do not allow yourself to be lulled into a false sense of se-curity and do not disregard the safety rules for power tools, even if you are familiar with the power tool after using it many times. Careless action can lead to serious injuries within a fraction of a second.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Remove the plug from the wall socket and/or remove the re-chargeable battery before you change the device’s settings, change accessory parts or put away the power tool. Such pre-ventive safety measures reduce the risk of starting the power tool accidentaIly.
Store idle power tools out of the reach of children and do not al-low persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Look after the power tool and application tool carefully. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less Iikely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working condi-tions and the work to be per-formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grip surfaces dry, clean and free from oil and grease. Slippery handles and grip surfaces do not permit safe operation and control over the power tool in un-expected situations.

CAREfUL HANDLING AND USE Of BATTERy DEvICES

Charge the batteries only in chargers that are recommended by the manufacturer. Risk of fire if a charger that is suitable for a specific type of battery is used with other batteries.
In the power tools, use only the batteries designed for the pur-pose. The use of other batteries may result in injuries and risk of fire.
Keep the unused battery away from paper clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery contacts may cause burns or fire.
If used incorrectly, liquid may leak from the battery. Avoid contact with this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns.
Do not use damaged or altered batteries. Damaged or altered batteries can be unpredictable and lead to fire, explosion or risk of injury.
Do not expose batteries to fire or elevated temperatures. Fire or temperatures over 130 °C can cause an explosion.
follow all instructions for charging and never charge the battery or the battery-powered tool outside the temperature range stated in the operating instructions. Incorrect charging or charging outside the permitted temperature range may destroy the battery and increase the risk of fire.

SERVICE

Have your power tool serviced by a qualified repair person us-ing only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never repair damaged batteries. All battery repairs should be carried out by the manufacturer or authorised customer service centres only.

ADDITIONAL SAfETy INSTRUCTIONS

Hold the appliance by the insu-lated gripping surfaces when performing work in which the tool may come into contact with hidden wiring. Contact with a live wire can also cause a charge in metal parts of the appliance and result in an electric shock.
Hold the device by the insulated gripping surfaces when perform-ing work in which the cutting tool may come into contact with hidden wiring or its own cord. If the screw were to come into contact with a live electrical cable, metal parts of the appliance could also become live and cause an electric shock.
Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or fire.

RESIDUAL RISKS
Even if properly operating and handling this electric tool, some residual risks will remain. Due to its construction and build, this electric tool may present the following hazards:

Cuts
Ear damage if working without ear protection.
Damage to your health caused by swinging your hands and arms when operating the appliance for longer pe-riods of time or if the unit is not held or maintained properly.

Warning! During operation, this electric tool generates an electro- magnetic field which, under certain circumstances, may impair the functionality of active or passive medical implants. To reduce the risk of serious or lethal injuries, we recommend that persons with medical implants consult their doctor and the manufacturer of their medical im-plant before operating the machine.

WARNING
Observe the safety information and notes on charging and proper use as shown in the instruction manual for your battery and charger from the Parkside X 20 V Team series. A detailed description of the charging process and further information can be found in the separate operating instructions.

Operation

WARNING:
Remove the battery from the device to prevent accidental operation. Risk of injury! Ensure that the ambient tem-perature does not exceed 50°C or fall below -20°C during work.

Checking the battery charge level
The battery’s (7) charge level is indicated by the charge state indicator (8). The LEDs indicate the battery’s charge level, when the device is in operation. To do this, press the softkey (6) of the charge level indicator (7).

red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs to be charged

Recharging the battery

NOTE:

Allow a hot battery to cool before charging.
Only charge the battery (8) when the red LED on the charge status indicator (7) is on.

Remove the battery (8) from the appliance, as necessary (see „Removing/inserting the battery“).
Insert the battery (8) in the charging compartment of the battery charger (16).
Plug the battery charger (16) into a mains outlet.
Once charging is complete, disconnect the charger (16) from the mains supply.
Remove the battery (8) from the char-ger (16).

Overview of the control display on the charger (16):

Green LED lights up without battery inserted:
Charger ready.
Green LED lights up:
Battery such alleged charged.
Red LED lights up:
Battery charging.
Red LED flashes:
Battery overheated
Red + green LEDs flash:
Defective battery

Inserting/removing the device’s battery pack

Inserting the battery pack:

Move the rotation direction switch (11) onto its middle setting (lock).
Slide the foot of the device onto the bat-tery pack (8) until it clicks into place.

Removing the battery pack:

Push the release button (9) and pull the battery pack (8) out towards the front of the device.

Choice of gear
Slide the gear selector (4) to 1 or 2, corresponding to a low or high torque selection.

1st gear ………………………. 0-400 min-1
2nd gear ……………………. 0-1400 min-1

WARNING:

A gear change may only be performed in standstill mode!

Set the direction of rotation

You can select the direction of rotation with the direction switch (clockwise and anticlockwise direction) and secure the device against accidental start up.
The arrow on the direction switch indicates the working direction.

Wait for the device to shut-down.
2. Push the direction switch (11) into the desired position:
Clockwise direction:
To drill and screw in screws. Press the direction switch to the right with the arrow pointing forwards
Counter-clockwise direction:
To unscrew screws. Press the direction switch to the left with the arrow poin- ting backwards
Switch lock: Bring direction switch to neutral position.

WARNING:

The direction changed may only be performed in standstill mode.

Torque setting
You can preset the maximum torque by ro-tating the torque adjustment ring (3). 25 torque settings + 1 drill setting are provided.

Turn the adjusting ring (3) to select the desired torque:

WARNING:

Torque adjustment should only be performed in standstill mode. Reaching the preset torque limit produces a noticeable rasping sound. This sound is caused by the slip clutch.

Tool change

Rotate the keyless chuck (2) counter-clockwise, until the drill chuck aperture
(1) is large enough to accommodate the tool.
Push the tool as far as possible into the keyless chuck (2).
Rotate the chuck clockwise to clamp the tool firmly.
To remove the tool again, rotate the keyless chuck (2) and pull out the tool.

NOTE:

There is a magnet bit holder ( 5). on the left and right of the housing. You can attach one bit at a time to the magnetic bit holder.

Switching on/off
By using the on/off switch (12) you can progressively control the speed. The longer you push the on-off button, the higher the speed.

Press the on/off switch (12) to start the device. The LED work light (10) lights up during operation.
To turn it off, release the on/off switch (12).
When you move the direction switch (11) to the middle position, the device is secured against being switched on.

NOTE:

During breaks in work, the device can be hung from a belt, using the integral metal clip ( 17). Take care to ensure that the device is switched off and secured against accidental activation.

Cleaning and maintenance

WARNING:

Contact our Service Centre about repairs and servicing not described in this manual. Only use OEM parts. Risk of injury!
Turn off the appliance and, before doing any servicing, remove the battery.

The following cleaning and servicing should be done regularly. This will ensure a long and reliable service life.

Cleaning

Do not spray the appliance with water and do not im-merse it in water. Electric shock hazard!

Keep clean the ventilation slots, motor housing and handles of the appliance. Use a damp cloth or a brush.
Do not use cleaning agents or sol-vents. You may otherwise irreparably damage the appliance.

Maintenance
The appliance cleaner is maintenance free.

Replacement parts/accessories Spare parts and accessories can be obtained at www.grizzlytools-service.eu

If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page 15).

Storage

Store the equipment in a dry place well out of reach of children.
The storage temperature for the re-chargeable battery and the device is between 0°C and 45°C. Avoid extreme cold or heat during storage to ensure the battery output is not adversely affected.

Disposal and protection of the environment
Remove the rechargeable battery before disposing of the device!
The device, accessories and packaging should be properly recycled.
Instruction on how to dispose of the rechargeable battery can be found in the separate instruction manual for your battery and charger Electrical appliances must not be disposed of with the domestic waste.

Return the unit to a recycling centre. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.
Defective units returned to us will be disposed of for free.

Guarantee

Dear Customer,
This equipment is provided with a 3-year guarantee from the date of purchase.
In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee
The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.
If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace at our choice the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it oc-curred.
If the defect is covered by our guarantee, you will receive either the repaired prod-uct or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects
The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately af-ter unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover
The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.
The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may there-fore be considered as wearing parts (e.g. keyless drill chuck) or to cover damage to breakable parts (e.g. switches).
This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

Please have the receipt and item number (IAN 360200_2007) ready as proof of purchase for all enquiries.
Please find the item number on the rating plate.
Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.
After consultation with our customer service, a product recorded as defec-tive can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service
For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.
We can handle only equipment that has been sent with adequate packaging and postage.
Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect. Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.
We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain Tel.: 0800 4047 657 E-Mail: grizzly@lidl.co.uk IAN 360200_2007

Importer
Please note that the following address is not a service address. Please initially con-tact the service centre specified above.
Grizzly Tools GmbH & Co. KG Stockstädter Straße 20
DE-63762 Großostheim
Germany
www.grizzlytools-service.eu