PARKSIDE PASSP 20-Li A2 Cordless Impact Wrench 20V Instruction Manual

PASSP 20-Li A2 Cordless Impact Wrench 20V
Instruction Manual

CORDLESS IMPACT WRENCH 20V

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Translation of the original instructions
All Parkside tools and the chargers PLG 20 A1/A4/C1/A2/C2/A3/C3/PDSLG 20 A1 of the X20V Team series are compatible with the PAP 20 A1/A2/A3/B1/B3 battery pack.

Charger PLG 20 A2/C2
Chargeur| 45 min| 60 min| 80 min
3,5 A| 3,5 A| 3,5 A
Charger PLG 20 A3/C3| 35 min| 45 min| 60 min
Ladegerat| 3,8 A| 4,5 A| 4,5 A
max. 4,5 A| 35 min| 45 min| 60 min
Charger| 3,8 A| 4,5 A| 4,5 A

CORDLESS IMPACT WRENCH 20V PASSP 20-Li A2

Introduction

Congratulations on the purchase of your new tool. You have chosen a high- quality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.
Intended use
This appliance is intended for screwing in and unscrewing screws as well as for tightening and loosening nuts. The appliance has a clockwise/ anticlockwise rotation, a 1/2″ external square drive bit holder and an LED working light. The light on this appliance is intended to illuminate the immediate working area of the appliance. The rotary impact function of the appliance enables the power of the motor to be converted into uniform rotary impacts. The impact mechanism comes into effect during tightening and loosening. The appliance is designed for use by adults. Young people under 16 years of age may only use the appliance under supervision. The manufacturer accepts no liability for damages caused by improper use or incorrect operation of the appliance.
Use this appliance only as described and for the areas of applications specified. The tool is not intended for commercial use. Any other usage or modification of the tool is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

Features

1. Tool holder
2. Rotational direction switch/lock
3. Belt clip
4. Fixing screw
5. LED work light
6. Torque display
7. Torque selector
8. ON/OFF switch/speed control
9. Battery pack*
10. Release button for the battery pack
11. High-speed charger*
12. Battery display  LED
13. Battery charge level button
14. Red charge control LED
15. Green charge control LED
16. Sockets 1/2″ to 3/4″ adapter

Package contents

• 1 cordless impact wrench 20V
• 1 1/2″ to 3/4″ adapter
• 3 sockets (17/19/21 mm)
• 1  belt clip
• 1 carrying case
• 1 set of operating instructions

Technical data

Cordless impact wrench 20V PASSP 20-Li A2

0-1550 rpm
Impact frequency| 1st gear no 0-500 rpm 2nd gear no 0-1500 rpm 3rd gear no 0-1900 rpm
Torque levels| 1st level 130 Nm 2nd level 400 Nm 3rd level 1356 Nm
Max. screw capacity| M33
Max. release torque| 1898 Nm
Tool holder| 1/2″
*Battery PAP 20 A3 Type**| LITHIUM-ION
Rated voltage| 20 V = (DC)
Cnpnrity| 4 Ah
Cells| 10 (80 Wh)

NOTE
Please note that the maximum performance of the device can only be achieved when using the PAP 20 A3/PAP 20 B3 battery.
**High-speed battery charger PLG 20 A3*
INPUT**

OUTPUT

* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value
Noise measurement value determined in accordance with EN 62841. The A-rated noise level of the power tool is typically:
Sound pressure level…………………LPA = 108.1dB (A)
Uncertainty S……………………………… KPA = 3 dB
sound power level…………………………………. LWA = 119.1 dB (A)
Uncertainty…………………………….  KWA = 3 dB
Vibration emission value
Total vibration values (vector total of three direct-actions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible size = 8.332 m/s2
Uncertainty ah K = 1.5 m/s2
Wear ear muffs!
NOTE
The vibration emission values and the noise emission values given in these instructions have been measured in accordance with a standardized test procedure and can be used for the comparison of the power tool with another tool.
The specified total vibration values and the noise emission values can also be used to make a provisional load estimate.
WARNING!
Depending on the manner in which the power tool is being used and, in particular, the kind of workpiece being worked, the vibration and noise emission values can deviate from the values given in these instructions during actual use of the power tool.
Try to keep the vibration load as low as possible. Measures to reduce the vibration load are, e.g. wearing gloves and limiting the working time. Wherein all states of operation must be included (e.g. times when the power tool is switched off and times where the power tool is switched on but running without load).

General power tool safety warnings

WARNING!
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
h) Do not allow yourself to get lulled into a false sense of security and do not ignore the safety rules for power tools, even if you are familiar with the power tool after repeated use. A careless action can cause severe injury within a fraction of a second.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and accessory tools, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Use and handling of the cordless electrical power tool
a) Charge a rechargeable battery using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable battery unit. There is a danger of fire if other types of rechargeable battery units are used.
b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire.
c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys, nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.
e) Do not use a damaged or modified battery. Damaged or modified batteries may behave unexpectedly and cause fires, explosions or pose a risk of injury.
f) Do not expose a battery to fire or excessively high temperatures. Fire or temperatures in excess of 130°C (265°F) can cause an explosion.
g) Follow all instructions regarding charging and never charge the battery or the cordless tool outside of the temperature range given in the operating instructions. Incorrect charging or charging outside of the permissible temperature range can destroy the battery and increase the risk of fire.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable batteries!
Protect the rechargeable battery from heat, for example from continuous exposure to sunlight, fire, water, and moisture. There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b) Never try to repair damaged batteries. Maintenance of batteries should only be carried out by the manufacturer or an approved customer service centre.
Appliance-specific safety instructions for impact wrenches

• Wear ear muffs when impact screwing. Exposure to loud noise can lead to hearing loss.
• Secure the workpiece. A workpiece securely held by a clamping device or vice is much safer than one held in your hand.
• Hold the power tool firmly. High torques can occur for brief periods while tightening and loosening screws.
• Wait until the power tool has come to a standstill before putting it down. The tool could catch in something and thus lead to loss of control of the power tool.
• Hold the power tool by the insulated gripping surfaces when performing an operation where a screw may hit hidden power lines.
• If a screw comes into contact with a live wire, this may make exposed metal parts of the power tool live and could give the operator an electric shock.

Original accessories/auxiliary equipment
Use only the accessories and additional equipment that are specified in the operating instructions and are compatible with the appliance.
WARNING!
Do not use any accessories that are not recommended by PARKSIDE. Doing so could lead to an electric shock and/or fire.
ATTENTION! Hot surface. There is a risk of burns.
Safety guidelines for battery chargers

• This tool may be used by children aged 8 years and above and by persons with limited physical, sensory, or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the tool safely and are aware of the potential risks. Do not allow children to use the tool as a toy.
• Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
• To avoid potential risks, if the appliance power cable is damaged, it must be replaced by the manufacturer, its customer service or by a qualified technician.
• The charger is suitable for indoor use only.

WARNING!
To avoid potential risks, if the appliance power cable is damaged, it must be replaced by the manufacturer, its customer service or by a qualified technician.
ATTENTION!

• This charger can only charge the following batteries: PAP 20 A1/PAP 20 A2/ PAP 20 A3/PAP 20 B1/PAP 20 B3.
• A current list of battery compatibility can be found at www.Lidl.de/Akku.

Before use
Charging the battery pack (see fig. A)
CAUTION! Always unplug the appliance before you remove the battery pack or connect the battery pack to the charger.
NOTE

• Never charge the battery pack at an ambient temperature of below 10°C or above 40°C. If a lithium-ion battery is going to be stored for an extended period, the charge level should be checked regularly. The optimum charge level is between 50% and 80%. The storage climate should be cool and dry and the ambient temperature should be between 0°C and 50°C.
• Connect the battery pack to the high-speed battery charger (see fig. A).
• Insert the mains plug into the mains power socket. The green charge control LED lights up briefly, then the red charge control LED lights up.
• The green control LED indicates that the charging process is complete and the battery pack is ready for use.

ATTENTION!

• If the red control LED that the battery pack cannot be charged. flashes, this means has overheated and
• If the red and green control LEDs both flash, this means that the battery pack is defective.
• Push the battery pack into the appliance.
• Switch off the charger for at least 15 minutes between successive charging sessions.
• Also, disconnect the power plug from the mains power socket.

Inserting/removing the battery pack
Attaching the battery pack Pushes the rotation direction switch into the middle position (lock). Push the battery pack into the handle until it clicks into place.
Removing the battery pack
Press the release button and remove the battery pack .
Checking the battery charge level
Press the battery charge level button to check the status of the battery (see also main diagram). The status/remaining charge will be shown on the battery display LED as follows: RED/ORANGE/GREEN = maximum charge RED/ORANGE = medium charge RED = low charge ­ charge the battery
Fitting the belt clip

• Loosen the fixing screw 3a using a standard Phillips screwdriver (not supplied).
• Hold the corresponding hole of the belt clip over that of the screw thread.
• Tighten the fixing screw 3a.

Switching on/off
Turn on

• Press and hold the ON/OFF switch to start up the tool.
• The LED work light lights up when the ON/OFF switch is pressed lightly or fully.
• This provides illumination of the work area in poor lighting conditions.

Switching off
Release the ON/OFF switch the appliance

Setting/preselecting the rotation speed/tightening torque

• Press the torque selector to select the required torque in stages. The selected torque is shown on the torque display.
• Press the ON/OFF switch lightly for a low speed and a low tightening torque. Increasing the pressure increases the speed and the tightening torque.
• The tightening torque depends on the selected speed/torque selection and impact duration.

NOTE
When tightening wheel nuts, however, the smallest torque setting must be selected to avoid over-tightening. The integrated motor brake ensures that the tool stops quickly.
ATTENTION!
The tightening torque actually attained must always be checked with a torque wrench!
Changing the direction of rotation
Change the direction of rotation by pressing the rotation direction switch towards the left or right.
Fitting a socket
Push one of the supplied sockets or the adapter onto the tool holder.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always switch the appliance off and remove the battery before carrying out any work on the appliance.
The tool is maintenance-free.
The appliance must always be kept clean, dry, and free from oil or grease.
Never allow liquids to get into the tool.
Use a dry cloth to clean the housing. Never use petrol, solvents or cleaners which can damage the plastic.
If a lithium-ion battery is going to be stored for an extended period, the charge level should be checked regularly. The optimum charge level is between 50% and 80%. The optimum storage environment is cool and dry.
NOTE
Unlisted replacement parts (such as switches) can be ordered via our service hotline.
Kompernass Handels GmbH warranty
Dear customer,
This appliance comes with a 5-year warranty valid from the date of purchase. In the event that this product has any defects, you, the buyer, have certain statutory rights. Your statutory rights are not limited in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within 5 years of the product’s date of purchase, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the 5-year warranty period, together with a brief written description of the fault and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
The X 20 V Team Series battery pack comes with a 3-year warranty valid from the date of purchase.\
The warranty period and statutory claims for defects|
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the Warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding the proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications/repairs which have not been carried out by one of our authorized service centres.
The warranty period does not apply to

• Normal reduction of the battery capacity over time
• Commercial use of the product
• Damage to or alteration of the product by the customer
• Non-compliance with safety and maintenance instructions, operating errors
• Damage caused by natural hazards

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (IAN) 364892_2101 available as proof of purchase.
• You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
• If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you.
• Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
• You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.

This QR code will take you directly to the Lidl service page (www.lidl- service.com where you can open your operating instructions by entering the item number (IAN) 364892_2101.
WARNING!

• Have your tools repaired by the Service Centre or a qualified electrician and only use genuine replacement parts. This will ensure that the safety of the appliance is maintained.
• Ensure that the power plug or the mains cable is replaced only by the manufacturer of the tool or by an approved customer service provider. This will ensure that the safety of the appliance is maintained.

Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 364892_2101
Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21 44867
BOCHUM GERMANY
www.kompernass.com

Disposal

** The packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.
Do not dispose of power tools in your normal domestic waste!
European Directive 2012/19/EU requires that worn-out power tools be collected separately and recycled in an environmentally compatible manner.
Do not dispose of batteries in your normal household waste!**
Remove the batteries from the appliance before disposal. Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Take the battery pack and/or appliance to a nearby collection facility.
Please consult your local authorities regarding the suitable disposal of worn out power tools/battery packs.
Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labeled with abbreviations (a) and numbers (b) with the following meanings: 1­7: plastics, 20­22: paper and cardboard, 80­98: composites.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is collected separately.

Translation of the original Conformity Declaration
We, KOMPERNASS HANDELS GMBH, document officer: Mr Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards, normative documents, and EC directives:
Machinery Directive
(2006/42/EC) EMC
(Electromagnetic Compatibility)
(2014/30/EU)
RoHS Directive
(2011/65/EU)
The manufacturer bears full responsibility for compliance with this conformity declaration. The object of the declaration described above complies with the requirements of the Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic appliances. Applied harmonised standards
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2017/A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Type/appliance designation:
Cordless impact wrench 20V PASSP 20-Li A2
Year of manufacture: 06­2021
Serial number : IAN 364892_2101
Bochum, 02.06.2021

Semi Uguzlu
– Quality Manager
We reserve the right to make technical changes in the context of further product development.
Ordering a replacement battery
If you want to order a replacement battery for your tool, you can do so easily via the Internet on www.kompernass.com or by telephone. Due to limited stocks, this item may sell out in a relatively short time. NOTE Online ordering of replacement parts is not possible in all countries. In this case, please contact the Service hotline.
Telephone ordering
Service Great Britain
Tel.: 0800 404 7657
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., peak
· 0,06 EUR/Min., off-peak)
To ensure fast processing of your order, have the article number of your appliance to hand (e.g. IAN 364892_2101) in case of questions. The article number can be found on the type plate or the title page of these instructions.

References

• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>