CREATE Electric Pizza Oven User Manual
- June 6, 2024
- CREATE
Table of Contents
CREATE Electric Pizza Oven
Thank you for choosing our pizza oven. Before using this appUance and to
ensure its best use. please read the Instructions carefully.
The safety measures indicated here reduce the risk of fire, electric shock and
injury when properly followed. Keep the manual in a safe place for future
reference, as well as the warranty, purchase receipt. and box. If applicable,
give these instructions to the future owner of the appllance. Always follow
basic safety instructions and risk prevention measures when using an electric
appliance. The manufacturer shall not be liable for any damage resulting from
the user’s failure to comply with theseinstructions.
SECURITY INSTRUCTIONS
When using any electrical appliance, the following basic safety precautions should always be observed.
- The appliance may only be used for its intended purpose.
- The manufacturer shall not be Liable for damage resulting from improper use or incorrect handling.
- Do not use outdoors or for commercial purposes. This appUance ls intended for domestic use only. If used for commercial purposes, the warranty will be void
- Always disconnect the appliance before cleaning and when not in use. Wait for the oven to cool completely before cleaning it.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance may be used by children and persons with reduced physical. sensory or mental abilities or lack of experience and knowledge if they have been safely supervised or Instructed In the use of the appliance and understand the dangers Involved.
- Never Immerse the cable, plug or appliance in water or other Liquids. If the appliance should fall into water, immediately unplug it from the mains and have it checked by an expert before using it again. It may cause fire, electric shock, injury or death.
- Do not lift or operate the appUance If the power cable or plug Is damaged, or If the appliance Is malfunctioning or has been dropped or damaged in any way. In case of damage, please contact the after-sales service. A damaged cable or plug must only be replaced by the manufacturer or a qualified person to avoid injury.
- Never plug this appliance Into an external timer as this can be dangerous.
- Accessible surfaces become hot during use. Please be careful when touching the buttons or handles, and do not touch the heating elements directly to avoid burns.
- This appliance generates heat and steam when In use. Handle with care to avoid Injuringyourself or damaging the appliance. Only use the handle to open the lid. Be careful when opening, as the accumulated steam inside can burn you. We recommend using oven gloves.
- Do not unplug the pizza oven by pulling on the cable – always hold the plug.
- Use only accessories recommended by the manufacturer.
- Do not let the cable hang over the edge of a table or countertop. Do not operate the appliance near hot surfaces, avoid proximity to open fires and au sources of heat and Ignition.
- Do not move the oven if there is hot oil or other hot liquids inside it.
- Always connect the cable first to the oven and then to the wall socket.
- Turn the appliance off before unplugging It.
BEFORE FIRST USE
- Before using your pizza oven for the first time? run the appUance with the Ud closed for 10 minutes at power setting 5 to heat the stone. This will burn off the lubricant on the oven’s heating elements and help to preheat the stone surface.
- This process will not affect the performance of your oven and you do not need do it again.
- Never pour oil or water directly onto the stone surface when you are cooking, seasonin& or cleaning it.
- Never use a kntfe, pizza cutter or metal objects on the stone surface to avoid damaging the cooking surface.
- This oven is designed to cook pizzas made with fresh dough and frozen pizzas.
- When you are going to cook a frozen pizza, let it defrost before putting it in the oven for a crisper result.
- If you are going to cook a pizza made with fresh dough, sprinkle a little flour on the stone surface before putting the pizza on ft. If the dough Is very sticky, add more flour to avoid it sticking to the oven surface.
INSTRUCTIONS FOR USE
- First, make sure the main control dial Is ln the OFF position and open the oven before switching it on to ensure there is nothing inside it.
- Plug the appliance into a 220V/240V socket. To switch on, turn the temperature control dial to maximum (5) and a Light will come on to indicate the oven is preheating. Preheating the oven helps give you a crisper result.
- Set the timer to 10 minutes to preheat the oven. After 10 minutes, the oven will be ready to use.
- Place the pizza dough on a board and add your favourite ingredients. Never overfill the pizza or pile up the ingredients. Ingredients must always be lower than the upper heating element to avoid burning.
- Check the oven rs properly preheated and sUde the pizza from the board onto the hot stones. Warningl The cooking surface and the handle will be extremely hot. Don’t touch them until they have cooled, or use oven gloves.
- Close the lid, Leaving the dial in position 5. Let your pizza cook for 4-5 minutes or until you get the desired result. Remember that every pizza Is dtfferent and the cooking time will depend on the thickness of the dough and the ingredients on top.
- We recommend opening the oven after 3 minutes to check the cooking progress. If the pizza is not ready yet, close the lid again and Let it cook a Little Longer.
- If your pizza is cooking too quickly, turn the temperature control dial counter-clockwise to lower the temperature. To raise the temperature again, turn the dial clockwise.
CLEANING AND MAINTENANCE
- Clean the appliance after each use.
- Always unplug the appUance and wait for it to cool down before cleaning or repairing it
- To clean the external surface of the oven, only use a damp cloth. Never Immerse the appUance in water or other Liquids.
- Don’t use metallic utensils, oi~ water or abrasive cleaning materials as this can damage the non-stick finish and the external surface. Remove any foodstuffs stuck on the surfaces with a plastic spatula and dry the surface with paper towels or a clean cloth.
- Don’t use the stone surfaces as a cutting board as this will damage them
TROUBLESHOOTING
PROBLEM | CAUSE | SOLUTION |
---|
The temperature indicator
Light goes off and on.| This is an automatic thermostat light.| The Light will
stay on until the selected temperature is reached.
The top of the pizza burns.| The oven temperature is too hot.| When you check
the state of the pizza. if you think the top is cooking more quickly than the
base, lower the temperature to 4 and let it continue cooking (with the
thermostat tight off). Another option is to leave the lid open while the pizza
finishes cooking.
The pizza base burns.| The oven temperature is too hot.| Make sure the oven
has been preheated to temperature 5. When the thermostat Light goes off, wait
a couple of minutes for the stone to rest before putting the pizza on it. When
you are going to cook several pizzas in a row, we recommend lowering the
temperature to 4 and leaving the lid open a couple of minutes after each
pizza.
The stone surface Is dirty.| The pizza base Is soggy.| Next time, add more
flour to the dough. To clean the base use a plastic spat ula and a clean
cloth. Make sure all parts are dry before putting the oven away.
| Compliance with objectives: 2012/19/E\J and 2015/863/EU on the restriction
of the use of dangerous substances in electric and eledronlc equipment as well
as ttleir waste disposal. The symbol with the crossed dustbin shown on the
package Indicates that the product at the end of its service life shall be
collected as separate waste.. Thereforel any products that have reached the
end of their useful life must be given to waste disposal centres speclalising
in separate collection of wa-ste electrical and electronic equipment or given
back to the retailer at the time of purchasing new similar eqtlipment on a one
for one basis. The adequate separate collection for the subsequent start·up of
the equipment sent to be recycled, treated and disposed of in an
enviromentally compatible way contributes to preventing possible negative
effects on the environment and health and optimises the recycling and reuse of
components making up the apparatus. Ab11sive disposal of the product by the
user Involves applicatlon of tfie administrative sanctions aocordlng to tne
laws.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>