Aosom 370-166V80 Terrain Vehicles Battery Powered Ride On Instruction Manual

Aosom 370-166V80 Terrain Vehicles Battery Powered Ride On

CHILDREN’S ELECTRONIC TOY BEACH CAR

• Suitable for 18-36 Months
• Maximum user weight: 20 kg

WARNING: Must be assembled by an adult. Read and understand this entire manual before using! Please keep this manual for future reference as it contains important information. Before first time use, charge the battery for at least 4-6 hours, but no more than 10hours.

IMPORTANT. RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

About Your New Vehicle
On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and its rider.

Specification

• Suitable age: 18-36 months

• Charge time: 8~12 hours

• Load capacity: Under 20 kg
  390-9000~ 12000

• Size of car: 720 x 400 x 455 mm

• Speed: 2.8-4.6 km/h

Parts List

Parts Diagram

HINT: Some parts shown are assembled on both sides of vehicle

Safety

PREVENT INJURIES AND DEATHS:

• NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle.
• This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, or on near steep inclines or steps, swimming pools or other bodies of water.
• Always wear shoes, always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children 18-36 months due to its maximum speed; Maximum user weight is 20 kg.
• This toy has no brake.

WARNING:

• Must be assembled by anadult.

Rules for Safe Riding

• Keep Children within Safe Riding Areas:
  •  Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .
• This vehicle has adjustable play seat belts. Please instruct children how to tie the safety belt before using, guarantee the security.

Fit the Front Axle Linkage

Gently turn the vehicle body upside down.

1. Fit the front axle linkage to the vehicle body.
2. Insert four 04×16 screws through the front axle linkage and into the vehicle body, tighten with a screwdriver.
   • Turn the vehicle body on its side.
3. Insert the straight end of the steering column into the hole on the vehicle body and out through the hole on the top of the vehicle body.
4. Insert the bent end of the steering column into the hole on the front axle linkage.

Attach the Handle Bar

Turn the vehicle body over.

• 1. Insert the power unit connector into the hole the vehicle body.
• 2. Fit the handle bar onto the end of the steering column.
• 3&4. Line up the holes on the steering wheel with the holes on the steering column, insert the M5x30 machine screw. Fasten a nut on the opposite end of the screw. Using a long nose pliers to hold the nut while tightening the screw on the other side with a screwdriver.
• 5. Plug the power unit connector into the connector on the vehicle body.

Attach the Rear Wheels

1. Slide a wheel onto the rear axle from the right side. Ensure the wheel match up with the gear box.
2. Slide a Φ8 washer onto the rear axle.
3. Tighten a lock nut to the end of the rear axle with a spanner.
4. Insert the tabs on the wheel cover (or hubcap) into the grooves on the wheel.
5. Slide a Φ10 washer onto the rear axle from the left side.
6. Slide a wheel onto the rear axle.
7. Slide a Φ8 washer onto the rear axle.
8. Tighten a lock nut to the end of the rear axle with a spanner.
9. Insert the tabs on the wheel cover (or hubcap) into the grooves on the wheel.

Attach the Front Wheels

1. Slide a Φ 10 washer onto the front axle from the left side.
2. Slide a wheel onto the front axle.
3. Slide a Φ 8 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner.
5. Insert the tabs on the wheel cover (or hubcap) into the grooves on the wheel.

External charging type: Connect the Power Supply

If your product was External Charging type, follow the steps on this page.

1. Using a slotted screwdriver(not included) or coin to turn the seat lock, and remove the seat.
2. Puig the battery connector into the terminal on battery.
3. Replace the seat.

Use your New Ride-on

IMPORTANT!
Always stop vehicle when changing the speed or direction to avoid damage the gears and motor.

1. Power button:

   • To move the product, press the button.
   • To stop or slow down, release the button.

2. Forward/stop/reverse switch:
   Changes the direction that the product moves from forward to reverse.

   • To move the product forward, press the switch to top position.
   • To move the vehicle reverse, press the switch to down position

3. ( If equipped) Music/horn button
   Press for music/horn playing.

Charging

WARNING
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!

• This product with Charging Protection: when charging, all functions will be cut off! Only an adult can charge and recharge the battery!
• When the vehicle begins to run slowly, recharge the battery.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than 20 hours at most.
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion.
• Do not use the battery or charger for any other product.

External charging type

1. Plug the charger port into the input socket. (the socket in on the back of the vehicle body)
2. Plug the charger plug into a wall outlet. The battery will begin charging.

Troubleshooting Guide

firmly plugged

into each other. If wires are loose around the motor

contact your distributor please .

Battery is dead| Replace battery , contact your distributor please.
Electrical system is damaged| Contact your distributor please .
Motor is damaged| Contact your distributor please.
| Vehicle does not run very long| Battery is under charged| Check that the battery connectors are firmly plugged into each other when recharging
Battery is old| Replace battery , contact your distributor please .
Vehicle runs sluggishly| Battery low on power| Recharge battery , contact your distributor please .
Battery is old| Replace battery , contact your distributor please.
Vehicle is overload| Reduce weight on vehicle.
Vehicle is being used in harsh conditions| Avoid using vehicle in harsh conditions ,see .
Vehicle needs a push to go forward| Poor contact of wires or Connectors| Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor, contact your distributor please .
“Dead Spot” on motor| A dead spot means the electric power is not being delivered to the terminal connection and the vehicle needs repair. Contact your distributor please .
| Difficult shifting from forward to reverse or vice-versa| Attempting to shift while the vehicle is motion| Completely stop the vehicle and shift, see