KOHLER K-707000-L Frameless Sliding Bath Door Owner’s Manual
- July 6, 2024
- Kohler
Table of Contents
KOHLER K-707000-L Frameless Sliding Bath Door
Specifications
- Product: Frameless Sliding Bath Door K-707000-L
- Material: Clear plastic wall jambs
- Available Colors/Finishes: Bright Polished Silver Anodized, Dark Bronze Anodized, Brushed Nickel
- Available Glass Options: Crystal Clear
- Dimensions:
- Width Range: 55-5/8″ (Min) to 59-5/8″ (Max)
- Height: 55-7/16″ with a walk-through height of 53-3/16″
- Base-To-Wall: 3/8″
- Shower Ledge Min: 2-1/2″
- Shower Wall Min: 2-1/2″
- Flat Width Range: 24-3/4″ (Min) to 28-3/4″ (Max)
- Installation Codes/Standards: ANSI Z97.1, CAN/CGSB-12.1, CPSC 16CFR 1201
FAQs
- Q: What should I do if the wall jambs do not cover existing shower door holes?
- A: The wall jambs are made of clear plastic and may not fully cover existing holes. You can consult with a professional installer for alternative solutions.
- Q: How should I clean the glass door to maintain its appearance?
- A: Use a mild detergent and water solution to clean the glass door. Avoid abrasive cleaners that may damage the surface.
Product Usage Instructions
- Features
- The center-guided mechanism for the smooth, quiet sliding action and easy cleaning
- The contemporary towel bar and knob combination offers storage on the outside of the door without encroaching on the bathing space
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than the original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Tempered glass ensures enhanced safety and durability
- Material
- Frameless, 1/4″ (6 mm) thick Crystal Clear tempered glass
- Technology
- The frameless design with minimal metal allows for greater ease of cleaning
- A low bottom track creates easy entry and exit to the bathing space
- Installation
- Out-of-plumb adjustability simplifies installation
- Sliding bath door
- Not for use in hospitality
- Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
- KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
- See the website for detailed warranty information.
- Available Colors/Finishes
- Color tiles are intended for reference only.
- Available Glass Options
- Code /Description
- L /Crystal Clear
DIMENSION
Technical Information
All product dimensions are nominal.
- Base-To-Wall Radius – Max: 3/8″ (10 mm)
- Shower Ledge Min Flat: 2-1/2″ (64 mm)
- Shower Wall Min Flat: 2-1/2″ (64 mm)
Notes
- Install this product according to the installation guide.
- Wall jambs are made of clear plastic and may not cover existing shower door holes.
- NOTICE: The vertical opening should be a minimum of 58″ (1473 mm) to allow clearance for installing the top track over the wall jambs.
- The vertical opening should be a minimum of 58″ (1473 mm) to allow for installation clearance.
CONTACT
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
- 6-12-2024 20:39 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>