i-tec U3CHARGEHUB16 USB 3.0 Charging Hub 16 Port + Power Adapter 90 W User Guide

: June 6, 2024
: i-tec

Table of Contents

INTRODUCTION
DESCRIPTION
CHARGING
SYSTEM REQUIREMENTS
SPECIFICATION
PACKAGE CONTENTS
SAFETY INSTRUCTIONS
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USB 3.0 CHARGING HUB 16 PORT
+ POWER ADAPTER 90 W

User guide P/N: U3CHARGEHUB16

Please read the entire instruction manual carefully. A detailed manual is available on our website www.i-tec.cz/en/ in the tab „Manuals, drivers“. In case of any issues, please contact our technical support at: support@itecproduct.com

https://i-tec.cz/en/produkt/u3chargehub13-2/

Quick Start / USB 3.0 Charging HUB 16 Port

INTRODUCTION

The HUB is an ideal companion for everybody who does not have enough USB ports in his/her notebook, ultrabook or PC and who has to constantly connect and disconnect his/her favorite USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc. This HUB offers 16 USB 3.0 ports with the Plug & Play function and standard USB charging – the HUB will automatically detect connected equipment for USB charging. As this HUB is equipped with 16 USB 3.0 ports, it can charge up to 16 devices at a time. The USB 3.0 interface is especially important for data transfers from USB 3.0 memory cards and flash drives, where its high transfer rate is most used. In the packing is included also an external power adapter, which is essential for the HUB. The power adapter guarantees USB charging stability and HUB performance. This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer and immediately you can start using it. This HUB has a built-in overcurrent protection of your computer in case of short connection on the peripheries. The interface is compatible with USB 2.0 /

1.1. INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10, MAC OS X 10.6 AND HIGHER,
LINUX, CHROME OS

The HUB has installed automatically, no need to install drivers. Connect the connector of the power adaptor to the HUB and connect the power adaptor to a socket outlet with 230V. Then plug the HUB via USB cable into an available USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the onscreen instructions. The HUB will be installed and displayed in Device manager as “Generic USB Hub” and “Generic USB SuperSpeed Hub”.

DESCRIPTION

16x output USB 3.0 ports for connecting USB equipment
LED diode – Next to each USB 3.0 port is a LED that is illuminated by pressing the switch next to the given port and turns off after pressing the switch again when the HUB is powered.
The USB port on/off switch – turns the port on/off.
Input for power adapter connection
USB 3.0 type A/B port

CHARGING

For proper function, the HUB needs the power adapter which is included in the package. Observe the basic principles of safety when handling this power adapter (e.g. do not leave it in the reach of children, if the adapter is in the 230V mains, then do not put the plug in the water, etc.).

CHARGING

The HUB supports charging of the connected USB mobile equipment such as smartphones (including iPhone and Samsung phones), ebook readers, multimedia players, GPS navigators, and tablets (e.g., Asus, Toshiba, GoClever, Prestigio, Emgeton, Sensor). Using the original cable connect the equipment to be charged to the USB port of the HUB. At the same time the power adaptor needs to be connected to the HUB as well.

SYSTEM REQUIREMENTS

Windows 7 / 8 / 8.1 / 10, macOS X 10.6 or higher, Linux, Chrome OS

SPECIFICATION

16x USB 3.0 port for connecting USB equipment
1x USB 3.0 cable for connecting the HUB to a notebook / PC
Transfer rate up to 5 Gbps
USB charging detection mechanism for mobile devices
Plug & Play function
Overload and overcurrent protection
LED diode
Storage temperature -10~85 °C
Working temperature 0-50 °C
Power adapter: input AC 100240 V, 5060 Hz, 2.0 A; output DC 12 V, 7.5 A
OS Windows 7 / 8 / 8.1 / 10, macOS X 10.6 or higher, Linux, Chrome OS
Product dimensions 226 x 52 x 23 mm
Product weight 250 g

PACKAGE CONTENTS

itec USB 3.0 Charging HUB 16 port
USB 3.0 data cable from A to B. (100 cm)
Power adapter (DC cable 150 cm)
Quick Start

SAFETY INSTRUCTIONS

Do not expose to extreme temperatures and air humidity.
Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.
Save the user manual for possible use later.
In cooperation with the service department:
Check functionality after falling to water or to the ground.
Check functionality when the cover is broken.
Send the device back if it does not work in accordance with the user manual.

FAQ

available on our website www.i-tec.cz/en/ on the „FAQ“ tab of this product.

EUROPEAN UNION ONLY
NOTE : MARKING IS IN COMPLIANCE WITH EU WEEE DIRECTIVE
This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This wil benefit the environment for all. (European Union only)

Ostrava 28. 12. 2020

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.www.i-tec.cz/en