belkin BPD001 Magnetic Portable Wireless Charger User Guide

: June 6, 2024
: belkin

Table of Contents

Information
IMPORTANT NOTE:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOOST↑CHARGE™
BELKIN POWER BANKS
BATTERIES EXTERNES BELKIN
Magnetic Portable Wireless Charger
SKU: BPD001

Information

FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100, declare under our sole responsibility that the products, which this declaration relates, comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

IMPORTANT NOTE:

Industry Canada Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B).
This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING : When using this product, basic precautions should always be followed, including the following:
Please read the operating instructions including charging instructions and information on the minimum and maximum operating temperatures supplied with this power bank.
To reduce the risk of injury, close supervision is necessary when the product is used near or by children.
For indoor and dry location use only. Do not expose the power bank to rain or snow. Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
Use of a power bank in a manner not recommended in these instructions may result in a risk of fire or injury to persons.
The power bank will generate heat when charging. Always charge in a well- ventilated area. Do not charge under pillows, blankets, inside purses or on flammable surfaces.
Do not use the power bank if visible defects are observed or if it has been wet or damaged or modified to prevent electric shock, explosion, and/or injury. Contact the dealer or authorized agent or Belkin for assistance. Do not disassemble, open, microwave, incinerate, paint, insert foreign objects into the power bank. Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
Do not expose the power bank to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause an explosion.
Do not subject the power bank to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the power bank.
Do not short-circuit the power bank or store it in a receptacle where it may be short-circuited by other metallic or conductive objects.
Operating Conditions: 0° C to 40° C
Simplified EU Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the products to which this declaration relates, are in conformity with EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and (EU) 2015/863 RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at the following Internet address: www.belkin.com/doc

Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, UK Belkin B.V., Herikerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, NL
DISPOSAL INFORMATION FOR USER
For information on product disposal, please refer to http://www.belkin.com/uk /weee-regulations/ Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).

The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves the application of administrative sanctions according to the laws in force.

Product Type: BOOST↑CHARGE™ Magnetic Portable Wireless Charger
Model No: BPD001
Input USB C: 5V 3A, 9V 2A
Output USB A: 5V 2.4A
Output USB C: 5V 3A, 9V 2A, 12V 1.5A
Output (USB A + USB C shared): total 5W 3A Max
Output Wireless: 5V 5W, 7.5V 7.5W, 9V 10W
Output (Shared): 15W Max
Frequency band in which the radio equipment operates: 110kHz ~148kHz
Maximum power transmitted: 37.7 dBμA/m

WARRANTY AND SUPPORT INFORMATION
IMPORTANT!
PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT
WARRANTY INFORMATION
BELKIN PRODUCT AND CONNECTED EQUIPMENT LIMITED WARRANTY

(Australia and New Zealand)
This warranty is provided to you by Belkin Limited (ABN: 64 095 402 663), an Australian corporation and a wholly-owned subsidiary of Belkin International, Inc., of Suite 11, 14 Pioneer Avenue, Tuggerah NSW 2259, phone: +61 (0) 2 4350 4600, email: acce@belkin.com (“Belkin”).
IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS
The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under the Australian Competition and Consumer Act 2010 or the New Zealand Consumer Guarantees Act 1993 (CGA) (as applicable) and other applicable Australian and New Zealand consumer protection laws (together
“ANZ Consumer Laws”).

This manufacturer’s warranty is governed by the laws of the country in which you purchased your product.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Repair of the goods may result in loss of data. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
In New Zealand, our goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993 (CGA).
This manufacturer’s warranty is not intended to:
• change or exclude any rights under the ANZ Consumer Laws that cannot be lawfully changed or excluded; or
• limit or exclude any right you have against the person who sold the Belkin Product to you if that person has breached their sales contract with you.
Note : This means that the general exclusions and limitations of liability in this document do not affect any rights you may have under the ANZ Consumer Laws.
WHAT DOES THIS WARRANTY COVER?
Product Warranty: Belkin warrants that this Belkin product and any associated software media (i.e. media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period as defined below (Product Warranty). This means that the product won’t be faulty, and that it will look and work as advertised, during the Warranty Period.
Connected Equipment Warranty: Belkin also covers damage to any equipment which is connected through the Belkin product to a properly wired AC power line with protective ground (Connected Equipment) caused by failure of the Belkin product to operate as described in the product documentation and arising as a result of impulses from lightning, or other power transients, or by momentary (less than 1ms) voltage surges or spikes (an Occurrence) during the Warranty Period (Connected Equipment Warranty), if the claim is made within fifteen (15) days from the date of the Occurrence.
The Connected Equipment Warranty will not apply if damage to the Connected Equipment resulted from:

telephone-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers telephone-line transient protection;
coaxial-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers coaxial-line transient protection; or
network-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that offers network-line transient protection.

The Connected Equipment Warranty will remain effective for the Warranty Period set out below. The Connected Equipment Warranty automatically ends when the Product Warranty ends.
Who is covered under the Product Warranty and the Connected Equipment Warranty?
Only original end-user purchasers of the product purchased within Australia or New Zealand are covered.
How long is the product warranted and what is the maximum value of the Connected Equipment Warranty?
The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts for the period set out in the table below (Warranty
Period). Your rights during the Warranty Period are in addition to your consumer guarantee rights that cannot be excluded under the ANZ Consumer Laws. Belkin’stotal liability under the Connected Equipment Warranty shall not exceed the maximum aggregate monetary limits set forth in the table below:

Product Type| Warranty Period| Maximum Monetary
Limit (US Dollars)
---|---|---
New products| 2 years| $2,500 USD
Refurbished products| The length of the original Warranty or 30 days
Replacement products| The length of the original Warranty or 30 days
Software media (if provided with the product)| 90 days| N/A

A claim under this warranty is only eligible if it is made within the Warranty Period.
What isn’t covered by the Product Warranty and Connected Equipment Warranty?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be added to the Product Warranty and Connected Equipment Warranty,
Belkin does not give any warranty:

for the Connected Equipment, for any services associated with the Connected Equipment, or any remedies offered or provided by the manufacturer of the Connected
Equipment;
in relation to software or services provided by Belkin or any third party included in or with the product other than the warranty for software media described above in
this warranty;
that the product, software or services will always operate uninterrupted or error-free;
that the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure and cannot be hacked;
or
that a third-party service the product needs will always be available.
Will this Product Warranty always apply?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be added to the Product Warranty, the Product Warranty does not apply if:
the product has been tampered with or the assembly seal has been removed or damaged;
the product has been altered or modified by someone other than Belkin;
the warranty claim was made fraudulently or by misrepresentation;
the product was not installed, operated, repaired, or maintained in accordance with Belkin’s instructions (for example, this warranty will not apply if the product has been used outdoors or in a wet area, or if the product has been used together with a generator, heater, sump pump, water-related device, life support device, medical
device, car, motorcycle, or golf-cart battery charger). To be used indoors only and in dry areas. All warranties contained herein are null and void if used in any way with
any of the aforementioned devices;
the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident;
damage to the product is cosmetic, including scratches and dents, or defects caused by normal wear and tear or normal aging of the product;
the serial number on the product has been altered, defaced, or removed;
the product was used in conjunction with other extension cords, power strips, adapters, UPSs, surge protectors, other grounding wires or electrical connections; or
the product was supplied or licensed for beta, evaluation, testing or demonstration purposes, and you didn’t buy or license the product.

Will Belkin cover damage to Connected Equipment in all situations under the Connected Equipment Warranty?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be added to the Connected Equipment Warranty, Belkin does not cover
damage to Connected Equipment in the following situations:

the Product Warranty has expired or does not apply (please see section above);
the Connected Equipment was not properly or directly connected to the product;
not all wires leading into the Connected Equipment, including telephone and coaxial lines, pass through the appropriate product;
damage to the Connected Equipment was not caused by an Occurrence;
the power outlet to which the product was connected was not properly grounded or not grounded at all;
the Connected Equipment has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident;
damage to the Connected Equipment is cosmetic (including scratches and dents), or damage was caused by normal wear and tear or normal aging of the Connected
Equipment;
damage to the Connected Equipment was caused by an Act of God (other than lightning), including but not limited to typhoon, hurricane, erosion, earthquake, thunderstorm, inclement weather, flood, tsunami, vandalism, theft, or war;
damage to the Connected Equipment was caused by a power outage, a sustained low voltage situation, or a low-voltage disturbance, including but not limited to
brownouts or sags;
repair or replacement of the damaged Connected Equipment is covered by a third party’s manufacturer’s warranty, a seller’s extended warranty, or your insurance
policy;
Belkin determines that the Connected Equipment was not used under normal operating conditions or in accordance with the manufacturer’s instructions for the
Connected Equipment; or
you continue to use the product in the knowledge that the Protected Light indicator has gone out.

How will Belkin make things right?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be added to the Product Warranty, if you make an eligible claim in relation
to your defective Belkin product under the Product Warranty, Belkin will, at its option:

replace the product with a reasonably available equivalent new Belkin product; or
refund you the purchase price of the product, minus any rebates and discounts applied at the point of purchase
Any replacement products are warranted for the Warranty Period. All products that are replaced become the property of Belkin.
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be added to the Connected Equipment Warranty, if you make an eligible claim in relation to your damaged Connected Equipment under the Connected Equipment Warranty, Belkin will, at its option:
pay the reasonable costs of repairing the damaged Connected Equipment as assessed by Belkin in its sole discretion;
replace the damaged Connected Equipment with a reasonably available equivalent new or refurbished Connected Equipment (in which case we will engage the repair
facility and negotiate and settle the cost of repair); or
refund you the fair market value of the damaged Connected Equipment as reasonably assessed by Belkin in its sole discretion.
Belkin makes every reasonable effort to repair or replace your damaged Connected Equipment under this warranty. However, as the repaired or replacement Connected
Equipment is manufactured by third parties, Belkin does not make any warranty in relation to such repaired or replacement Connected Equipment, nor is Belkin able to
confirm that the manufacturer of the Connected Equipment will offer such a warranty.
All calculations performed by Belkin in evaluating your claim under this warranty are final and binding on you except in the case of errors.
For Belkin to properly and expeditiously validate your claim under this Product Warranty and/or the Connected Equipment Warranty, you agree that Belkin may examine

the damaged product, the damaged Connected Equipment and/or the site where the damage occurred. Belkin has a right to do these things until any claim under the Product Warranty and/or the Connected Equipment Warranty is finalized. The damaged product and damaged Connected Equipment must remain available for inspection during that time. Do not dispose of the product and Connected Equipment until your claim has been fully resolved. Please review the section titled “What do I need to do to make a claim?” under the header “Belkin Technical and Warranty Support Information” below.
Once your claim under this warranty is fully settled, Belkin has a right to be subrogated under any existing insurance policies that you may have.
General Exclusions and Limitations of Liability
For persons who purchased the product in Australia, if a supply under this warranty is a supply of goods or services to a consumer within the meaning of the Australian Consumer Law, nothing contained in this warranty excludes, restricts or modifies the application of any provision, the exercise of any right or remedy, or the imposition of any liability under the Australian Consumer Law. Subject to your rights that cannot be excluded under the Australian Consumer Law and may be added to the Product Warranty and Connected Equipment Warranty, Belkin’s liability under this warranty shall be limited to:

in the case of services, supplying the services again or payment of the cost of having the services supplied again; and
in the case of goods, replacing the goods, supplying equivalent goods or repairing the goods, or payment of the cost of replacing the goods, supplying equivalent goods
or having the goods repaired.
For persons who purchased the product in New Zealand, if a supply under this warranty is a supply of goods or services to a consumer within the meaning of the CGA,
nothing contained in this warranty excludes, restricts or modifies the application of any provision, the exercise of any right or remedy, or the imposition of any liability
under the CGA. Subject to your rights that cannot be excluded under the CGA and may be added to the Product Warranty and Connected Equipment Warranty,
Belkin’s liability under this warranty shall be limited to:
in the case of services, supplying the services again or payment of the cost of having the services supplied again; and
in the case of goods, replacing the goods, supplying equivalent goods or repairing the goods, or payment of the cost of replacing the goods, supplying equivalent goods or having the goods repaired.
Subject to the above provisions in relation to the Australian Consumer Law and any rights and remedies that you may have under the CGA (as applicable), Belkin, under
the Product Warranty and Connected Equipment Warranty:
excludes all other conditions, guarantees, rights, remedies, liabilities, representations, warranties and other implied or express terms, conferred by statute, custom or the general law that imposes any liability or obligation on Belkin, including but not limited to any implied warranties of non-infringement, loss of or damage to data, lack of viruses or free from virus or malware attack, security, performance, lack of negligence, workmanlike effort, that the functions contained in the product will meet your requirements, or that defects in the product will be corrected, or that your use of the product will generate accurate, reliable, timely results, information, material or
data;
excludes all liability for the loss of, or damage to, data caused by use of a Belkin product, or its repair;
excludes any liability it may have to you for:
loss of revenue or profit;
loss of the ability to use any third party products, software or services, and
any indirect, consequential, special, incidental or punitive loss or damages (including but not limited to loss of use, data, business interruption or cost of procuring substitute services),
which arises under any law (including the law of negligence save for negligence on the part of Belkin or its representatives and relates to your use, or inability to use a Belkin product or software, or any related services.
limits its monetary liability to you, under any law, to the price that you paid for the Belkin product.
References in this Section to “indirect, consequential, special or incidental losses” shall mean any losses which (i) were not reasonably foreseeable by both parties, and/
or (ii) were known to you but not to Belkin and/or (iii) were reasonably foreseeable by both parties but could have been reasonably prevented by you such as, for example
(but without limitation), losses caused by viruses, Trojans or other malicious programs, or loss of or damage to your data.
These terms are the terms of the Product Warranty and Connected Equipment Warranty.
If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.

BELKIN TECHNICAL AND WARRANTY SUPPORT INFORMATION HOW DO I GET HELP?
If you have a question about your product or experience a problem with it, please go to http://www.belkin.com/au/support/. You will find lots of online support tools and
information to help you with your product.
What should I do if my product is defective?
You always have the option to return the product to the original seller if you have a problem. You can make a claim with the seller based on this warranty or any consumer
laws that apply to you.
What do I need to do to be entitled to claim under the Product Warranty or the Connected Equipment Warranty?
Call our Technical Support team on 1800 235 546 if you are calling from Australia or 0800 235 546 if you are calling from New Zealand.
You will need to give us some information when you contact us such as:

your contact details;
the part number (also known as the model number) of your Belkin product, is usually located on the base of the product and begins with the letter ‘F’ (e.g. F5D7230au4);
a detailed description of the problem;
a dated proof of original purchase; and
if you have spoken to us previously, your case number.
If this is the first time you have called to claim under this warranty, you will be issued with an 8 digit case number.