MOMAN TYC-2 Mini 2.4G Lavalier Wireless Microphone Type-C Mobile Phone User Manual
- June 6, 2024
- MOMAN
Table of Contents
MOMAN TYC-2 Mini 2.4G Lavalier Wireless Microphone Type-C Mobile Phone
Product Description
- Thanks for choosing our product.
- This product is designed as a smart wireless microphone, which delivers professional audio. Plug & play, frequency auto-pairing.
- Large Applications: Livestream, Vlogging, Interview, Online education, etc.
- The system consists of Wireless Transmitter & Wireless Receiver.
System Illustration
- Windscreen
- RF indicator
- Charging port
- Clip
- Power on/off
- Signal output
- RF indicator
Wireless Transmitter
Function/Status | Action | Led Indicator |
---|---|---|
Power on | Long press 3s | Green |
Power off | Long press 3s | All off |
System Pairing | Red & Green flashing | |
Successful Pairing | Green steady | |
Pause/Continue | Short press 1s after power on | Green flashing for Pause, |
steady green for continue work
Lower battery| When powered on| Red flash every 10s
Charging| Charging with
Type C connector
| Red for charging, off
when fully charged
Connection Failure| Power off automatically
if no connection for 3min
|
All off
Wireless Receiver
Wireless Receiv
Function/Status
| er
Action
| Led Indicator
---|---|---
Power on| Plug into intended
device
| Red on
Power off| Unplug from device| Off
System Pairing| | Red flashing
Successful Pairing| | Red steady
Specifications
Frequency Range
| 2.4GHz
---|---
Frequency Response| 20-20kHz
S/N| 64dBm
Sensitivity| – 42dB
Cartridge| Condenser
Power Supply| 5V/1A
Charging Time| ≈1.5h
Step 1:
Plug the receiver to the charging port of the smartphone (Or other intended
devices), Red light on the receiver flashes.
Step 2:
Power on the transmitter, and RF indicator stays steady green.
Step 3:
Red light steady on the receiver, Greenlight steady on the transmitter, which
means they are paired successfully and ready to work.
The receiver is powered by a smartphone, does not to be charged while working.
Cautions: Please plug the charging cable to the charging port ( 5V/1A) on the receiver if there is the low battery on the smartphone when working with the wireless mic.
Package Contents
Wireless Transmitter X 1 Wireless Receiver X 1 Charging Cable X 1 User Manual X 1
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>