MOMAN Clica Wireless Control Extension Rod User Manual

June 6, 2024
MOMAN

MOMAN logo

MOMAN Clica Wireless Control Extension Rod

MOMAN Clica Wireless Control Extension Rod fig1

Caring For Your MOMAN Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, impact of external force.
  • Do not attempt to disassemble the product. Doing so voids warranty.
  • Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  • Failure to follow all the instructions may result In mechanics damage.
  • Warranty does not apply to human errors.

Product Introduction

MOMAN Clica Wireless Control Extension Rod fig2

  1. 4Screw

  2. Adapter

  3. Battery & Charging Indicaton 25%-50%;
    Folder 1 times in a row: battery level at 1%-25%;

  4. Bluetooth Indicator
    Stay blue: bluetooth connected;
    Rash blue: bluetooth disconnected

  5.  TW: Zoom Button

  6. Focus/Photo B~on
    /irroto: fully press

  7.  Record Button

  8.  ON/OFF Button

  9. C1 : Custom Button

  10. Charging Port

  11. Remote

  12.  Receiver

Operations

  1. Product Usage
    Extend the extension rod to the length needed (maximum extension
    length: 25cm/9.85in)
    MOMAN Clica Wireless Control Extension Rod fig4

  2. Fix the camera on the extension rod through 1/4 screw

  3. Turn on the rennote

Package List

MOMAN Clica Wireless Control Extension Rod fig5

Device Connection

MOMAN Clica Wireless Control Extension Rod fig6

MOMAN Clica Wireless Control Extension Rod fig7

Specification

  • Weight 125g (0.271bs)
  • Battery Capacity 3.7V/200mAh
  • Che.rging Input 500g (1. 1 lbs)

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B dig~al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, Including Interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals