AROMA AG-80A Acoustic Guitar Amplifier Owner’s Manual

AROMA AG-80A Acoustic Guitar Amplifier

PRECAUTIONS

Location
Using the unit in the following locations can result in a malfunction.

• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields

Power supply
Be sure to turn the power OFF when the unit is not in use. Use only the supplied AC adaptor and the correct voltage. To prolong battery life please cycle charge every three months if not in regular use. In order to make full use of the performance of the lithium battery, please make sure the temperature is between -10 and 60 °C when the battery is being charged.

Interference with other electrical devices
Radios and televisions placed nearby may cause reception interference. Operate this unit at a suitable distance from radios and televisions.

Handling
To avoid breakage, do not apply excessive force to the switches or controls.

Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene, thinner, cleaning compounds, or flammable polishes.

Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment.

Keep this manual
After reading this manual, please keep it for later reference.

PANEL FUNCTION

1. Channel 1 Phase
2. Channel 1 Level
3. Channel 1 Bass
4. Channel 1 Middle
5. Channel 1 Treble
6. Chorus
7. Channel 2 Phase
8. Channel 2 Level
9. Channel 2 Bass
10. Channel 2 Middle
11. Channel 2 Treble
12. Reverb
13. MIC level
14. MIC bass
15. MIC reverb
16. MIC treble
17. LED Indicator
18. Bluetooth
19. Bluetooth volume
20. Master volume
21. Power switch
22. Power indicator
23. Power recharging jack
24. Output
25. OTG output
26. MIC input
27. Guitar input

FEATURES

• Driven by a 6.5″ woofer and 3″tweeter, output power up to 80Watts
• The Guitar channel and MIC channel function independently
• 3 bands equalizer, reverb controls for both guitar, 2 bands equalizer for mic channel
• High efficient compressor inside to protect the speaker and prevent distortion
• Bluetooth inside for convenient connection with your smartphones or other devices with BlueTooth function
• High-capacity rechargeable Li battery makes it portable and convenient to use Leather handle, and the metal lever for being anti-stamping and suitable for outdoor use
• This product is suitable for live broadcast or recording use an OTG line to connect your cellphone or other devices

PANEL FUNCTION

HOW TO USE

Step 1: After connecting the instrument ( MIC ), adjust each knob to the appropriate position, There are adjustable knobs

1. PHASE
   Use the Phase switch to improve bass at low volume and suppress feedback at high volume

2. LEVEL
   Use the LEVEL knob to set the signal level for the instrument input.

3. BASS
   Boost here to add weight to the sound. In general, boost bass at low volumes and cut bass at higher levels.

4. MIDDLE
   This control affects how well the instrument blends in or stands out in the mix. At loud volumes, a midrange cut will achieve a more natural sound.

5. TREBLE
   Boost high to add“air” to the sound of the instrument.

6. REVERB
   Control the reverb effect of the instrument or MIC. channels.

7. CHORUS
   Control the chorus effect of the instrument channel.

Step 2: Adjust the master volume knob to the appropriate position you need

MASTER VOLUME
Set the level of the AG-80 with the master volume. In general, put the master volume as high as possible using less Gain (2 o’clock to 5 o’clock) to achieve the cleanest sound.

BLUETOOTH

Connect Bluetooth, press and hold button” ”. The blue indicator is On, which means the Bluetooth is turned On. The amp’s name is“AG-80A” A beep sound“Di” will be gendered when the Bluetooth connection succeeds.

OTG

When using this product for recording or live broadcasting, it will need one OTG line to connect to the cellphone or recording device(buy separately). You can also use Bluetooth at the same time, and the Bluetooth sound will be recorded.

OUTPUT

Balanced XLR output on the main mix, can connect to an external loudspeaker system or mixer.

Remind

1. The Bluetooth volume level is preset according to the Android system. Please turn the volume down accordingly if you use a Los system phone.
2. If you need to change the BlueTooth connection of the amp to another phone, please disconnect the previous connection.
3.  Both guitar channel shares common effect groups(chorus and reverb).

INDICATOR

Remind: It is not recommended to use the device while charging.

SPECIFICATION

Guitar Channel 1

• Input jack: 6.35mm X 1
• Input impedance: 10Kohm
• effect: available

Guitar Channel 2

• Input jack: 6.35mm X 1
• Input impedance: 10Kohm
• effect: available

Mic Channel

• Input jack: XLR gauge
• Input impedance: 10Kohm
• reverb effect: available
• Volume control: independent
• Guitar: 3 bands EQ ( each independent ) MIC: 2 bands EQ
• Peak output: 80W
• Speaker: 6.5”woofer, 3”tweeter Bluetooth version: 5.0
• Power jack: 24V 5A( )
• Li battery: 18.5V/4800mAh
• Battery life: ≥8H (80% volume level) Recharging time: < 3.5H

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>