OUKITEL WP12 Smartphone User Guide

: June 6, 2024
: OUKITEL

Table of Contents

Overview
Accessories
Basic parameters
Other Features
RF Specification:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Overview

|
---|---

Accessories

Battery
WP12is included an internal battery.
You can track your battery status with the icon shown on the top right of the screen. As microwave ovens, stoves, or radiators, batteries may explode when overheated.

Warning

Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.

Basic parameters

Display:	5.5” HD+ I PS Touch screen
Operating system:	Android™ 11
Processor	Cortex-A53 up to 1.8 GHz *4
GPU:	IMG GE8300 @ 550 MHz
RAM:	2/3/4GB
ROM:	16/32/64GB
Battery:	4000mAh, Quick Charge

Camera

Rear Camera

13M AF + 2 M FF YUV
LED Flash

| Front Camera

5.0MP

---|---

Connection (1/0)

Europe Band:	American Band:
GSM: 2/3/5/8	GSM: 2/3/5/8
WCDMA: 1/8	WCDMA: 1/2/4/5/8
FDD: 1/3/7/8/19/20	FDD: 2/4/5/7/12/17/28a/28b

FM.87.5 MHz -108 MHz
SIM Card Slot: Dual SIM,Nano+Nano/Nano+TF Card

Note: Based On Local Frequency Band

Other Features

Video: AVI, MP4, WMV, MKV, MOV, ASF, FLV
Audio: FLAG, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
Image: JPEG, BMP, GIF, PNG

Dimensions	Package contents

Height :174mm

Android is a trademark of Google LLC
Comes with the Google™ app and Google Chrome™
MANUFACTURER NAME SHENZHEN YUNANI
INTELLIGENT TECHNOLOGY CO., LTD
MANUFACTURER ADDRESS. A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.2O DAFU INDUSTRIAL ZONE, AOB~I COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,
SHENZHEN CHINA

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
FCC ID: 2ANMU-WP12

http://oukitel.com

RF Specification:

Function	Operation Frequency	Max RF output power:	Limit
BLE	2402MHz-2480MHz	-1.68 dBm	20 dBm.
BT(BR+EDR)	2402MHz-2480MHz	6.04 dBm	20 dBm.

Warning:

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
Use careful with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing loss.
The product shall only be connected to a USB interface of version USB2.0.
Adapter shall be installed near the equipment and shall be easily accessible.
Operation temperature:-10~40ºC .
The plug considered as disconnect device of adapter.
The device complies with RF specifications when the device used at 5mm from your body(SAR limit 2.0 W/Kg for 10-g) and at 0mm from your Member(DAS limit 4.0 W/Kg for 10-g). head SAR Value: 0.621W/Kg for 10-g; Body SAR Value: 1.549W/Kg for 10-g; Member DAS Value: 3.726W/Kg for 10-g;
Accessories information:

Battery: DC 3.85V, 4000mAh, 15.4Wh Adapter
Model: HJ-0501000B3-EU
Input: 100-240V~50/60Hz 0.15A
Output: 5.0V 1.0A 5.0W
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD hereby declares that this Smart Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.

EU Declaration of Conformity
We,
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD (A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA) hereby declares that this 4G Smart Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
According to Article 10(2) of Directive 2014/53/EU, the Aqua lnfinity can be used in Europe without restriction. The full text of the EU declaration DOC is available

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

| ES| LU| RO| CZ| FR| HU| SI
---|---|---|---|---|---|---|---
DK| HR| BE| BG| DE| EE| IE
EL| IT| Cy| LV| LT| SK| MT
NL| AT| PL| PT| Fl| SE| TR
NO| CH| IS| LI| | |

DECLARATION OF CONFORMITY

I hereby declare that the product
Product Name: Smart Phone
Brand Name: OUKITEL
Model: WP12

(Name of product, type or model, batch or serial number)

System components:

Battery:
Rechargeable Li-ion Battery; Model: S86; Specification: DC 3.85V, 4000mAh, 15.4Wh;

Adapter:
Model:HJ-0501000B3-EU
Input: 100-240V~50/60Hz 0.15A
Output: 5.0V 1.0A 5.0W

USB Cable:
Length: 80cm;

Earphone:
Length: 120cm;

Hardware Version: TE656_MAIN_PCB_V1.1
Software Version: OUKITEL_WP12_EEA_V01

Satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU:and declare that the same application has not been lodged with any other notified body.

EN 62368-1:2014+A11:2017………………………………………………………………………………………………………..
EN 50360:2017 ……………………………………………………………………………………………………………………………
EN 50566:2017…………………………………………………………………………………………………………………………….
EN 62209-1:2016…………………………………………………………………………………………………………………………
EN 62209-2:2010…………………………………………………………………………………………………………………………
EN 62479:2010…………………………………………………………………………………………………………………………….
ETSI EN 301 489-1 V2.2.3 (2019-11)………………………………………………………………………………………….
ETSI EN 301 489-3 V2.1.1 (2019-03)…………………………………………………………………………………………..
ETSI EN 301 489-17 V3.2.4 (2020-09)…………………………………………………………………………………………
ETSI EN 301 489-19 V2.1.1 (2019-04)…………………………………………………………………………………………
(Draft) ETSI EN 301 489-52 V1.1.2 (2020-12)…………………………………………………………………………….
EN 55032:2015+A11:2020……………………………………………………………………………………………………………
EN 55035:2017+A11:2020…………………………………………………………………………………………………………….
EN 61000-3-2:2014…………………………………………………………………………………………………………………………
EN 61000-3-3:2013………………………………………………………………………………………………………………………..
ETSI EN 300 328 V2.2.2 (2019-07)……………………………………………………………………………………………….
ETSI EN 301 893 V2.1.1 (2017-05)………………………………………………………………………………………………
ETSI EN 301 511 V12.5.1 (2017-03)……………………………………………………………………………………………..
ETSI EN 301 908-1 V11.1.1 (2016-07)…………………………………………………………………………………………..
ETSI EN 301 908-2 V11.1.2 (2017-08)…………………………………………………………………………………………
ETSI EN 301 908-13 V11.1.2 (2017-07)………………………………………………………………………………………..
ETSI EN 303 413 V1.1.1 (2017-06)……………………………………………………………………………………………….
ETSI EN 303 345-1 V1.1.1 (2019-06)…………………………………………………………………………………………….
Draft ETSI EN 303 345-3 V1.1.0 (2019-11)……………………………………………………………………………………
ETSI EN 300 330 V2.1.1 (2017-02)………………………………………………………………………………………………..

(Title(s) of regulations, standards, etc.)
All essential radio test suites have been carried out.

NOTIFIED BODY: MiCOM Labs Inc

Address:
575 Boulder Court……………………………………………..
Pleasanton…………………………………………………………
CA 94566, USA………………………………………………..
Identification Number: 2280…………………………….

MANUFACTURER or AUTHORISED REPRESENTATIVE:

Address:
SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT, SHENZHEN CHINA

This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative.