BLUE SEA 1833 M2 OLED Digital Monitor Installation Guide

BLUE SEA 1833 M2 OLED Digital Monitor

Components Included

360 Panel Mounting Kit

System Overview

1833 DC Voltmeter Connections

Connector Pin Assignment

Connector Pin Assignment Table

M2 Meter Navigation

Screen Menu Functions

Press any button to bring up the menu.

1. After start-up, press any button to access the menu.
2. Press the UP or DOWN arrow buttons to scroll through menu windows.
3. To set alarms and for more detailed information, see the online manual at www.bluesea.com/products/1833

WARNING

• If you are not knowledgeable about electrical systems, have an electrical professional install this unit. The diagrams in these instructions pertain to the installation of the unit and not to the overall wiring of the vessel.
• Verify that no other DC or AC sources are connected to the vessel’s wiring before installing the unit.

CAUTION
The back of the unit is not waterproof. Do not install where the back of the monitor is exposed to water.

Warranty

The M2 OLED Digital Meters come with a 5-year manufacturer’s warranty. This means the meter is warranted to be free from defects in materials or workmanship for 5 years from the date of first purchase. The warranty is limited solely to the cost of repair or replacement of the M2 Meter product. Costs associated with labor or shipping of the defective parts are not covered. Blue Sea Systems cannot accept liability for damage due to the misuse of the M2 Meter.

Mounting Options

Flat Mount

Surface Mount

360 Panel Mount PN 1525 (If retrofit to existing panel)

STEP 1
Use 1/4″ Mounting Screws

STEP 2

Snap header and footer into mounting clips and post. Snap the mounting bezel into place with the flat edge up.

STEP 3

Mounting Templates

References

• Blue Sea Systems - Innovative electrical systems — Built to last
• M2 DC Voltmeter - Blue Sea Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>