BASS JAXX SP-0914 LED Wireless Speaker Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
Instruction Manual
Thank you for purchasing the Circuit LED Wireless Speaker.
This manual provides more information about this wireless speaker, please read
the instructions before using it.
Product Overview
Package Contents
Circuit LED Wireless Speaker x
Micro USB Charging Cable x 1
Instruction Manual x 1
Power On/Off
Power on Press the PowellPlayiPause Button Power off Press the Power/Play/Pause Button and hold on 2 seconds.
Note: Always power off the speaker when not in use.
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select “BT CIRCUIT SPK” from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on. the wireless speaker will automatically connect with the last successfully paired device.
Charging your Wireless speaker
For your safety, please always use the appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.
- Use the Micro USB cable provided with this wireless speaker.
- Connect the Micro USB plug to the Micro USB charging port on the speaker, then conned the USB plug to a USB port on a computer or wall adapter to begin charging_
- The LED Indicator will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Wireless speaker if it has been not used for more than 12 months.
Technical specification
Driver Diameter. 52 mm
Impedance: 4 Ohms
Power Supply:
Li-ion Battery 3.7V 300 mAh
Playtime: 2-2.5 Hours
Charging Time: 1.5-2 Hours
Light Mode: With Light Strip To
Have Gradient Lighting
Bluetooth Range: 328 Feet
Charging Method: USB Charging
Micro USB Cable Included
FAQ
-
If the Wireless speaker cannot be paired with your device. please try the following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that the Bluetooth search function of your mobile device is activated. -
If the Wireless speaker cannot be recharged:
If you use a power outlet. ensure that the power supply is connected securely and the outlet works. If you use a computer. ensure that it is connected and the USB port is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is DC 5V 1A.
-In order to charge the product in a safe manner and reliable conditions. please only adopt a certified appropriate charger/ adapter for charging the product
-Only charges the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °CAW deg °F.
– Do not heat above 70 deg °01513 deg °F, eg. Do not expose to sunlight or
throw onto the fire. -Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of the Lithium battery pack can lead to an explosion, heat generation, fire development, or smoke development.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirements.
FCC ID: 2ADM5-SP-0914
Keep All Relevant Information For Future Reference
ITEM# SP-0914
Distributed by 1616 Holdings. Inc.
701 Market Street. Suite 200
Philadelphia. PA 19106
Made in China
Documents / Resources
| BASS
JAXX SP-0914 LED Wireless
Speaker
[pdf] Instruction Manual
SP-0914, SP0914, 2ADM5-SP-0914, 2ADM5SP0914
---|---