SUPERATV IN-CBS-P-RZR9TS RZR Trail S Cargo Rack Alpha Instruction Manual
- March 12, 2024
- SUPERATV
Table of Contents
SUPERATV IN-CBS-P-RZR9TS RZR Trail S Cargo Rack Alpha
INSTRUCTION MANUAL
INSTALLATION INSTRUCTIONS
Cargo System: for Polaris RZR® Trail / S
– Do not discard packaging until product has been successfully installed.
– Cargo Box is not included.
| Item | Description |
|---|---|
| A | Platform |
| B | Clamp Bracket x 2 |
| C | Long Tie Down x 2 |
| D | Short Tie Down x 2 |
| E | Strut Mount – L |
| F | Strut Mount – R |
| --- | --- |
| G | Striker Bracket |
| H | Striker Bracket Mount x 2 |
| J | Strut x 2 |
Read instructions and view illustrations before beginning.
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will
change the ride of machine and may increase maintenance and part wear.
Operating any off-road machine while, or after, consuming alcohol and/or drugs
increases risk of bodily harm or death. No warranty or representation is made
as to this product’s ability to protect user from severe injury or death.
SuperATV® urges operators and occupants to wear a helmet and appropriate
riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should
damages occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of seller to user for all damages, losses, and
causes of action, if any, shall not exceed the total purchase price paid for
the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
– Install Striker Bracket Mounts (H). Reuse stock hardware; tighten.
– Install Striker Bracket (G) to Striker Bracket Mounts (H) with hardware shown; do not tighten.
– Install Strut Mounts (E)(F) with hardware shown; tighten.
– Install Clamp Brackets (B) to Clamps with hardware shown; tighten.
– Install Platform (A) to Clamp Brackets (B) with hardware shown; tighten.
– Install Platform (A) to Clamp Brackets (B) with hardware shown; tighten.
– Install Struts (J) to Platform (A) and Strut Mounts (E)(F) with hardware shown; tighten.
OPTIONAL:
– Install Tie Downs (C)(D) to Platform (A) with hardware shown; tighten.
– Tie Downs may be installed in different locations/combinations.
Specifications
- Model: IN-CBS-P-RZR9TS
- Installation Requirement: Professional installation recommended
- Components: A Platform, Strut Mounts, Clamp Brackets, Tie Downs, Struts, Striker Brackets, Striker Bracket Mounts
FAQ
Q: Can I install the Cargo Box with this product?
A: No, the Cargo Box is not included with this product.
Q: What should I do if I need assistance with installation?
A: For installation help, you can contact SuperATV via email at sales@superatv.com or call 1-855-743-3427 during their business hours.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>